• 제목/요약/키워드: Specific absorption rate (SAR)

검색결과 91건 처리시간 0.03초

휴대폰 전자파의 혈액 조사를 위한 SAR별 TEM 셀의 입력 전력 산출 (Input Power Determination of TEM Cell Due to SAR for Mobile Phone Wave Blood Exposure)

  • 윤지훈;손태호
    • 한국전자파학회논문지
    • /
    • 제16권8호
    • /
    • pp.810-814
    • /
    • 2005
  • TEM 셀 내에 있는 혈액에 대한 삽입 손실과 반사율을 측정하여, 원하는 혈액 흡수 SAR(Specific Absorption Rate) 선택에 따른 TEM셀 입력 전력을 구하였다. 혈액 세포는 피부 세포와 함께 전자파 영향을 연구하기 위한 기준 세포이다. 따라서 SAR에 따른 혈액 세포에 인가할 전력 산출은 정확해야 함은 물론 타당성이 있어야 한다. 이 연구에서는 g당 혈액 세포가 받는 전력을 산출하기 위해 50 g의 혈액을 이용하여 전달 전력 감소를 측정하였다. 측정된 데이터로부터 휴대폰 전자파 생체 흡수율 SAR 0.8, 1.6, 3, 4 mW/g에 해당하는 TEM셀 입력 전력을 계산하였다. 이 연구 결과는 배양 세포의 전자파 방사 장치에 응용함을 목적으로 하고 있다.

팔목 부착형 생체신호 측정기기에 사용가능한 방사패턴 재구성 안테나 설계 및 인체 SAR 영향 분석 (Design of Radiation Pattern Reconfigurable Antenna for Vital Signal Sensing Device Attached on Wristband and SAR Analysis on Human body)

  • 이창민;정창원
    • 한국산학기술학회논문지
    • /
    • 제16권1호
    • /
    • pp.666-670
    • /
    • 2015
  • 본 논문은 생체신호를 측정하는 팔목부착용 Fitbit Flex상에 구현된 방사패턴 재구성 안테나에 관련된 논문이다. 또한 본 논문에서 제안하는 루프-다이폴 방사패턴 재구성 안테나의 인체 내 부위별 전자파 흡수율 (Specific Absorption Rate; SAR)에 관한 논문이다. 본 논문의 루프-다이폴 방사패턴 재구성 안테나는 두 개의 RF 스위치를 사용하여 서로 반대방향의 두 가지 방사패턴을 구현한다. 방사패턴 재구성 안테나는 블루투스 (Bluetooth) 통신 대역 (2.4 - 2.485 GHz)을 사용하며, 최대이득은 1.96 dBi이다. SAR 시뮬레이션 결과로 블루투스 입력 평균전력 0.04 W가 팔목을 포함하는 인체 내 다섯 개 부위 (두부, 가슴, 배, 등, 팔목)에 입력되었을 때 Federal Communication Commission (FCC)의 기준인 단위 1 g 당 1.6 W/kg을 모두 만족함을 확인하였다. 또한 최대 SAR 값은 두부에서 1.12 W/kg이다.

RF 전자기장 생체 영향 연구 문헌에서 노출량 메타분석을 위한 통계적 기법 (The Statistical Technique for Dosimetric Meta-Analysis at in-vivo and in-vitro Papers about Bioeffects of RF Electromagnetic Field)

  • 최성호;김남
    • 한국전자파학회논문지
    • /
    • 제14권12호
    • /
    • pp.1311-1320
    • /
    • 2003
  • 본 논문에서는 RF 전자기장을 사용한 동물 및 세포 실험에서 전자기장 노출량의 정확성을 평가할 수 있는 방법을 제안하였다. 이를 위해 전자파 흡수율(SAR)을 전자기장 노출량의 단위로 사용한 동물 및 세포 연구 논문과 휴대폰 및 PDA에 대한 전자파 흡수율 시험 성적서를 대상으로 출력 전력, 전력 밀도 등과 SAR의 상관 관계 및 회귀 관계를 분석하였다. 동물 실험의 경우 전력 밀도와 SAR이, 세포 실험의 경우 출력 전력이 duty factor를 고려한 SAR과 통계적으로 유의한 상관 관계를 보였다. 회귀분석에서의 노출 불확실성을 평가하기 위해 결정계수값을 분석하였다. 각각의 실험장치 및 방법에 대한 해석 또는 측정 기법의 분석 이전에 본 연구 방법을 실시하여 대상 연구군의 특성을 고찰한다면 보다 효율적인 전자기장노출신뢰성 평가를 실시할 수 있을 것으로 판단된다.

자기공명영상시스템에서의 의료용 리드선의 전자기적 호환 연구 (Electromagnetic Compatibility Study of a Medical Lead for MRI Systems)

  • 유형석
    • 전기학회논문지
    • /
    • 제65권12호
    • /
    • pp.2019-2022
    • /
    • 2016
  • In the presence of an electrically conducting medical lead, radio frequency (RF) coils in magnetic resonance imaging (MRI) systems may concentrate the RF energy and cause tissue heating near the lead. A novel design for a medical lead to reduce this heating by introducing pins in the lead is presented. Peak 10 g specific absorption rate (SAR) in heart tissue, an indicator of heating, was calculated and compared for both conventional (Medtronic) lead design and our proposed design. Remcom XFdtd software was used to calculate the peak SAR distribution in a realistic model of the human body. The model contained a medical lead that was exposed to RF magnetic fields at 64 MHz (1.5 T), 128 MHz (3 T) and 300 MHz (7 T) using a model of an MR birdcage body coil. The proposed design of adding pins to the medical lead can significantly reduce the heating from different MRI systems.

이동전화 주파수에 대한 전자파 잔향실 형태의 전신 노출장치 개발 및 유효성 평가 (Development and Validation of Reverberation Chamber Type Whole Body Exposure System fer Mobile Phone Frequency)

  • 정기범;고경배;도현정;백정기;정연춘;최재훈
    • 한국전자파학회논문지
    • /
    • 제15권3호
    • /
    • pp.291-300
    • /
    • 2004
  • 이동통신 서비스의 급격한 증가로 인해, EMF(Electromagnetic field)노출의 생물학적 효과에 대한 많은 연구들이 수행되어져 왔다. 그러나 연구 수행에 있어서 필요한 무선 주파수 대역에서의 균일장 생성은 쉬운 일이 아니다. 이러한 어려움을 극복하기 위해 전신노출 시 스템에서의 전기장과 SAR(Specific Absorption Rate) 분포 측정이 발전을 해왔다. 본 논문에서는 EMC 대용 챔버로의 활용 가능성이 높은 전자파 잔향실 챔버를 이용하여 동물 실험용 전신 노출 장치를 개발하였다. 설계된 전자파 잔향실은 시뮬레이션과 측정 데이터를 이용하여 시험영역의 균일장에 대한 유효성을 검증하였다. 마우스에 대한 전신노출 실험에 있어서, 노출된 전자파에 대해 SAR을 확인하기 위해서 FDTD수치해석 방법과 측정 결과를 비교하였다. 전자파 잔향실 내부에서의 전기장 분포 특성을 해석하고, 이러한 해석 결과들을 통계적으로 처리하였다. CDMA 이동전화 주파수 대역에서(PCS & Cellular 대역) 입력 파워 변화에 따른 실험상태에서의 마우스 전신 SAR 평균값 및 국부 최대값을 제시하였다.

Realization of High Impedance Surface Characteristics Using a Periodically Transformed Artificial Magnetic Conductor Structure and Reduction Technique of Specific Absorption Rate

  • Lee, Seungwoo;Rhee, Seung-Yeop;Kim, Pan-Yeol;Kim, Nam
    • Journal of electromagnetic engineering and science
    • /
    • 제13권2호
    • /
    • pp.113-119
    • /
    • 2013
  • We developed a transformed, symmetrical, mushroom-like surface without via holes in cells focused on a 2.4-GHz WLAN band. Each slot in the novel type structure plays a key role in modeling at the desired frequencies. The designed artificial magnetic conductor (AMC) has several advantages, including a small size, a wider bandwidth, a short reflecting distance to the antenna, and easy fabrication because there are no via holes. Overall dimensions of the AMC cell are 21 mm $(Width){\times}21mm$ $(Height){\times}2.6mm$ (Thickness), and the bandwidth is about three times wider (11.7%) compared to that of a conventional AMC (4.0%). For evaluating the performance of the proposed structure, a reflector, which periodically consists of the designed AMC cells, was developed. The antenna with the investigated AMC reflector not only works within a quarter of the wavelength because of the extremely high wave impedance generated by the AMC cells on the surface of the structure but also reduces the specific absorption rate (SAR). Electromagnetic field (EMF) exposure to a human phantom was analyzed by applying the designed reflector to the 2.4-GHz dipole antenna in a tablet PC. The calculated peak SAR averaged over 1 g was 0.125 W/kg when the input power was 1 W and the antenna was located at 20 cm from the human phantom. However, the SAR value was only 0.002 W/kg (i.e., 98.4% blocked) when the designed reflector was inserted in front of the antenna.

Automatic RF Input Power Level Control Methodology for SAR Measurement Validation

  • Kim, Ki-Hwea;Choi, Dong-Geun;Gimm, Yoon-Myoung
    • Journal of electromagnetic engineering and science
    • /
    • 제15권3호
    • /
    • pp.181-184
    • /
    • 2015
  • Evaluation of radiating radiofrequency fields from hand-held and body-mounted wireless communication devices to human bodies are conducted by measuring the specific absorption rate (SAR). The uncertainty of system validation and probe calibration in SAR measurement depend on the variation of RF power used for the validation and calibration. RF input power for system validation or probe calibration is controlled manually during the test process of the existing systems in the laboratories. Consequently, a long time is required to reach the stable power needed for testing that will cause less uncertainty. The standard uncertainty due to this power drift is typically 2.89%, which can be obtained by applying IEC 62209 in a normal operating condition. The principle of the Automatic Input Power Level Control System (AIPLC), which controls the equipment by a program that maintains a stable input power level, is suggested in this paper. The power drift is reduced to less than ${\pm}1.16dB$ by AIPLC, which reduces the standard uncertainty of power drift to 0.67%.

무선통신 단말기의 SAR 저감법 (Method of SAR reduction for Wireless Transceiver)

  • 황재호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 춘계종합학술대회
    • /
    • pp.346-349
    • /
    • 2005
  • 본 논문은 무선통신용 휴대단말기를 설계하는데 있어 인체 전자파 흡수율(SAR)을 저감시키는 방법을 제안한다. 단말기의 안테나로부터 방사되는 전자파에너지는 휴대단말기 기구의 특정부분에 밀집되는데 이와 같은 전계강도는 인체의 두부에 영향을 미쳐 SAR값의 증가 요소로 작용한다. 이를 감소시키는 방법으로는 표면전계가 밀집되지 않는 구조의 기구 설계법을 제시한다. 안테나를 포함한 단말기의 해석은 유한요소법(FEM)을 사용하였으며, 본 저감법를 적용한 경우 SAR첨두치의 약50 %를 저감하는 효과가 나타났다.

  • PDF

A Metamaterial-Based Handset Antenna with the SAR Reduction

  • Kahng, Sungtek;Kahng, Kyungseok;Yang, Inkyu;Park, Taejoon
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권2호
    • /
    • pp.622-627
    • /
    • 2014
  • A method to reduce the specific absorption rate(SAR) of the antenna for WiMAX mobile communication is proposed in this paper. The SAR reduction is achieved by miniaturizing the physical size of the antenna for the given resonance frequency by devising a metamaterial-composite right- and left-handed(CRLH) configuration-based radiator much smaller than the quarter-guided wavelength adopted a lot in the conventional planar inverted F antenna(PIFA) or modified monopole antenna. The proposed antenna is placed near the head-phantom and its SAR is evaluated by the full-wave simulations(SEMCAD X), where the metamaterial-inspired antenna is shown to have the lower value than a modified monopole as the reference in terms of the SAR.

Human Head Size and SAR Characteristics for Handset Exposure

  • Lee, Ae-Kyoung;Choi, Hyung-Do;Lee, Hyung-Soo;Pack, Jeong-Ki
    • ETRI Journal
    • /
    • 제24권2호
    • /
    • pp.176-179
    • /
    • 2002
  • Using scaled models for an anatomical head model and a simple head model, we investigated the effects of head size on specific absorption rate characteristics for two mobile phones operating at 835 MHz and 1765 MHz. Our results showed that a larger head produced a higher localized SAR at 835 MHz. However, at 1765 MHz, the differences among the head models were insignificant since the superficial absorption was dominant over the effects of head shape and size. A larger head produced a lower whole-head averaged SAR at both frequencies.

  • PDF