• Journal of Radiation Protection and Research
• /
• 제25권2호
• /
• pp.109-114
• /
• 2000

The SI unit of specific absorption rate (SAR) in W/kg in the electromagnetic (EM) field as non-ionizing radiation is exactly same as the SI unit of absorbed dose rate in Gy/s in the ionizing radiation field. The SI unit of both physical quantities can be expressed in $[m^{\cdot}s^{-3}]$. Where, the unit of absorbed dose, Gy stands for Gray. In EM biological interactions, the SAR equations are derived and the characteristics of EM field energy absorption in terms of the SAR are discussed and described on the mathematical basis.

• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.217-221
• /
• 2005

이동통신 기기로부터 복사되는 전자파가 인체에 흡수되는 에너지의 양은 모의 인체 내에서 전자파 비흡수율 [SAR(Specific Absorption Rate)]로 평가된다. RF 센싱 프로브의 Schottky 다이오드에 검출된 DC 전압은 높은 레벨에서 자승법칙(Square Law) 영역을 벗어나 선형성을 나타낸다. Square Law Region을 벗어난 직선 영역의 검파는 적절한 DCP(Diode Compression Point) 값으로 검 파된 전압을 보상하여야 한다. 적절한 보상에 의한 한 점에서의 SAR 값은 200 W/kg까지 측정할 수 있다.

• 한국환경보건학회지
• /
• 제22권3호
• /
• pp.49-55
• /
• 1996

Water parsley(Oenanthe javanica(Blume) DC) was raised with varying population density(S) in the laboratory aquarium unit to determine the growth equation. The population density was measure after 7 days. The resultant growth curve was well fit to the equation 1/S = A+B (1/S0) with a high correlation coefficient ($R^2$ = 0.999). The maximum specific absorption rate was $9.011 \times 10^{-5}$ kg $NO_x-N/kg$ water parsley$\cdot$day and $1.31 \times 10^{-5}$ kg $PO_4-P/kg$ water parsley$\cdot$day when the average population density was $2.62 kg/m^2$. The relationship between population density and nutrient absorption rate, the absorption rate of $NO_x-N$ was 5.04~5.24 mg/l$\cdot$day when the population density was $7.51~10.0 $mg/m^2\cdot day$ and the absorption rate of $PO_4-P$ was 0.56~0.78 mg/l$\cdot$day when the population density was 5.02~10.0 $kg/m^2\cdot day$. Taking into account the nutrient absorption rate and growth rate, the population density between $7.0 kg/m^2\cdot day$ and $8.0 kg/m^2 \cdot day$ was selected. The removal rate of nutrient was investigated after 7 days culture. Removal rate of $NO_x-N$ was 95.6~99.95% with initial concentration of 35 mg $NO_x-N/l$, and the removal rate of $PO_4-P$ was also high, indicating 80.24~98.9% with initial concentration of 5.95 mg $PO_x-P/l$.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.57-63
• /
• 2013

PURPOSES : This study was performed to investigate a feasibility of job-site use of recycled concrete aggregate exceeding 3% of absorption rate. Test variables are coarse aggregate types such as natural aggregate, job-site processed recycled aggregate, and recycled aggregate processed from the intermediate waste treatment company. METHODS : First, aggregate properties such as gradation, specific gravity and absorption rate were determined. Next a basic series of mechanical properties of concrete was tested. RESULTS : All strength test results such as compression, flexure and modulus were satisfied for the minimum requirements. Finally up to first 48 elapsed days the shrinkage strains of concretes made from both recycled aggregates (in case of volume-surface ratio of 300) appeared to be greater than 26% of the companion concretes made from natural aggregates. CONCLUSIONS : Drying shrinkage result is ascribed to greater absorption rate and specific gravity of those specimens made from recycled aggregate. This may be reduced with an addition of admixtures.

• 한국콘텐츠학회논문지
• /
• 제13권2호
• /
• pp.308-313
• /
• 2013

본 연구는 자기공명영상장치의 특성변수인 숙임각(flip angle), 반복시간(repetition time, TR), 에코시간(echo time, TE)을 사용하여 전자파흡수율(specific absorption rate, SAR)을 알아보고자 하였다. 연구대상은 체중 10 kg부터 90 kg까지를 대상으로 하여 동일한 검사기법을 적용하였고, 매개변수의 변화에 따른 평균 SAR 및 peak SAR 값을 측정하였다. 체중에 따른 SAR는 TE에서 변화는 없지만 숙임각이 커지고 TR이 짧을수록 증가하였다. SAR 값은 두부 허용 기준치 범위에 포함이 되었고 분절별 체중에 따른 영상의 신호 대 잡음비(signal to noise ratio, SNR)는 체중이 증가함에 따라 SNR은 증가하지는 않았다. 본 결과를 바탕으로 적절한 특성변수를 사용하여 다양한 대조도와 SNR을 얻어 진단의 가치를 높일 수 있을 것이다.

• 한국전자파학회논문지
• /
• 제14권4호
• /
• pp.421-430
• /
• 2003

본 논문에서는 휴대폰 개발 초기단계에서부터 SAR(Specific Absorption Rate)를 고려할 수 있는 방법을 제안하였다. 먼저, 휴대폰의 폴딩 각도를 150$^{\circ}$에서 142$^{\circ}$까지 변화시키면서 SAR값을 계산하였다. 계산결과 폴더 각도가 작아질수록 SAR값이 감소함을 알 수 있었고, 142$^{\circ}$일 때 측정결과와 약 3.95 %의 오차가 있었다. EMI (Electromagnetic Interference) 방지 도료의 분포패턴을 변화시켜가면서 SAR값을 측정한 결과, 분포패턴이 다를 경우 SAR값이 다름을 알 수 있었다. 안테나 급전점 근처의 EMI 방지 도료를 제거할 경우 SAR 감소효율이 15.46 % 이었으며, 도료를 지그재그 패턴으로 분포시킬 경우 SAR 감소효율이 가장 크게 나타남을 알 수 있었다.

• ETRI Journal
• /
• 제27권2호
• /
• pp.227-230
• /
• 2005

A specific anthropomorphic mannequin (SAM) model was used to investigate the relation between local specific absorption rate (SAR) and head size. The model was scaled to 80 to 100% sized models at intervals of 5%. We assumed that the shell of the SAM model has the same properties as the head-equivalent tissue. Five handsets with a monopole antenna operating at 835 MHz were placed in the approximate cheek position against the scaled SAM models. The handsets had different antenna lengths, antenna positions, body sizes, and external materials. SAR distributions in the scaled SAM models were computed using the finite-difference time-domain method. We found that a larger head causes a distinct increase in the spatial peak 1-voxel SAR, while head size did not significantly change the peak 1-g averaged-SAR and 10-g averaged-SAR values for the same power level delivered to the antenna.

• 복식
• /
• 제55권5호
• /
• pp.101-107
• /
• 2005

In this article, mordant absorption rate by the Change of temperature and fabric, discharge level by water washing, mordant density and method in mordant dye are going to be handled. Besides, how treatment method will have an effect on absorption rate and color, is also going to be covered. An atom extinction photometer was used to measure the amount of mordant absorbed in fabric at each temperature and mordant type. It turned out that absorption rate differs according to the type of mordant and sample or temperature. Also it turned out that the mordant input amount has little influence on absorption rate, that is to say, if though you use more mordants, just tiny amount of mordant is going to be absorbed in cloth. It is true that the higher temperature goes up, the better mordant absorption gets. It is found that the type of mordant and sample, treatment period affects the discharge rate. Normally $15{\~}98\%$ mordant comes off the fabric by water washing, to be specific, $17{\~}47\%$ Iron by water washing and it has better performance on cotton and nylon than silk, $1\%{\~}52\%$ Aluminum by water washing and better absorption on silk, $36{\~}89\%$ Chrome by water washing and better absorption on silk, $50{\~}89\%$ copper by water washing and better absorption on silk, poor on cotton. The examination of the K/S values and colors between before and after soaping has been conducted under the circumstance that the test fabrics had been treated at $80^{\circ}C$ for 30 minutes with $0.2\%$ soaping solution. In case of pre-mordanted fabrics, the K/S value nosedived after soaping, meanwhile densely mordanted fabric's K/S value soared but after soaping, it dropped sharply. It turned out that soaping treatment deteriorates absorption much more than water washing. It's considered that $0.1 \%$ (W/V) of mordant density is appropriate.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.854-857
• /
• 2018

다양한 무선기기가 일상화됨에 따라 전자파가 인체에 미치는 영향에 대해 분석할 필요성이 증가하고 있다. 전자파가 인체에 미치는 영향을 나타내는 파라미터가 전자파 흡수율(SAR: specific absorption rate)인데, 이는 단순히 인체 조직만 대상으로 하고 있어 인공 치아 등의 금속 인공물이 삽입된 경우에는 전자파가 미치는 영향을 평가하기가 쉽지 않다. 본 논문에서는 SAR을 시뮬레이션하기 위한 방법을 소개하고 실제로 SAR을 시뮬레이션 하였다. 30 GHz 5세대 이동통신(5G) 주파수 대역에서 인공 치아가 삽입된 인체 머리 모델의 SAR은 최고치 $2.50{\times}10^{-3}W/kg$, 평균치 $8.58{\times}10^{-7}W/kg$으로 국내 허용 기준치 1.6 W/kg에 절대적으로 못 미침을 알 수 있다.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.49-56
• /
• 2018

The use of highly absorptive materials in cement-based materials is increasing for internal curing purpose. However, calculation of correct absorption capacity of such materials is not easy, which leads to change in the effective water-to-cement ratio of cement paste by either absorbing or releasing water. In this study, effective absorption capacity of a highly absorptive material was found using isothermal calorimetry. Moreover, the effect of specific surface area was investigated. It was found that the method was capable of finding effective water absorption capacity of activated carbon fiber. For the activated carbon fiber used in this research, the effect of specific surface area was negligible because the high BET surface area was due to micropores less than 1nm, which does not affect the rate of hydration curve. Thus, the effective absorption capacity of such materials can be found successfully using this method.