• Earthquakes and Structures
• /
• 제15권3호
• /
• pp.319-334
• /
• 2018

In this paper, an analytical study was carried out to propose an optimum base-isolated system for the design of steel structures equipped with lead rubber bearings (LRB). For this, 5 and 10-storey steel moment resisting frames (MRFs) were designed as Special Moment Frame (SMF). These two-dimensional and three-bay frames equipped with a set of isolation systems within a predefined range that minimizes the response of the base-isolated frames subjected to a series of earthquakes. In the design of LRB, two main parameters, namely, isolation period (T) and the ratio of strength to weight (Q/W) supported by isolators were considered as 2.25, 2.5, 2.75 and 3 s, 0.05, 0.10 and 0.15, respectively. The Force-deformation behavior of the isolators was modelled by the bi-linear behavior which could reflect the nonlinear characteristics of the lead-plug bearings. The base-isolated frames were modelled using a finite element program and those performances were evaluated in the light of the nonlinear time history analyses by six natural accelerograms compatible with seismic hazard levels of 2% probability of exceedance in 50 years. The performance of the isolated frames was assessed in terms of roof displacement, relative displacement, interstorey drift, absolute acceleration, base shear and hysteretic curve.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.1001-1002
• /
• 2006

Special problem emphasized by specialists in the field of analyzing the heat interchanges in the system ocean-atmosphere (SOA) is a necessity of determination of the near-surface atmospheric temperature, which can be only indirectly connected with characteristics of the SOA natural microwave radiation measured from satellites. That is why, the following dilemma is not obvious, but interesting and promised: what is better - to use the satellite methods for retrieving the partial parameters of the SOA or for analysis its state as a whole. To our opinion, this task is similar to the idea recognized by specialists engaged in the heat infrared region (8-12 mcm) of electromagnetic spectrum and its applications, where an intensity of natural infrared radiation (effective radiation) is used as the inherent property (the attribute) of the SOA heat balance. Here we studied important aspects of this problem: a) what medium initiates a heat transfer in the SOA and disturbs its heat balance - the ocean or the atmosphere b) what SOA parameters directly influence on its natural microwave radiation intensity (brightness temperature) measured from satellites? We relate these processes mainly to the synoptic range of time scales enriched by various events in the SOA interface such as the mid-latitude and tropical cyclones.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1072-1075
• /
• 2001

$Al_2O_3$ ceramics are generally used as components in processing equipment, devices or machinery because it can perform some functions better than competing metals or polymers. Many of these applications rely on $Al_2O_3$ ceramics special electromagnetic properties, its relative chemical inertness, hardness, strength and its temperature capabilities. But $Al_2O_3$ ceramics are brittle materials, a fact that may cause problems and at the same time be helpful while machining with laser. This study described a basic study of the input parameters effect on the dimension of the microhole at the $Al_2O_3$ ceramics using Excimer laser. In the laser microhole machining of $Al_2O_3$ ceramics, major input parameters are pulse energy, pulse power, pulse frequency and pulse numbers. In conclusion, we can get a smaller microhole and diameter rate by an appropriate pulse energy, pulse frequency and pulse number.

• Structural Engineering and Mechanics
• /
• 제67권3호
• /
• pp.219-232
• /
• 2018

This paper deals with the static bending of various types of FGM sandwich plates resting on two-parameter elastic foundations in hygrothermal environment. The elastic foundation is modeled as Pasternak's type, which can be either isotropic or orthotropic and as a special case, it converges to Winkler's foundation if the shear layer is neglected. The present FGM sandwich plate is assumed to be made of a fully ceramic core layer sandwiched by metal/ceramic FGM coats. The governing equations are derived from principle of virtual displacements based on a shear and normal deformations plate theory. The present theory takes into account both shear and normal strains effects, thus it predicts results more accurate than the shear deformation plate theories. The results obtained by the shear and normal deformation theory are compared with those available in the literature and also with those obtained by other shear deformation theories. It is concluded that the present results are slightly deviated from other results because the normal deformation effect is taken into account. Numerical results are presented to show the effects of the different parameters, such as side-to-thickness ratio, foundation parameters, aspect ratio, temperature, moisture, power law index and core thickness on the stresses and displacements of the FG sandwich plates.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.714-719
• /
• 2011

The surface roughness depending on the machining method is very important because is produce a finished product through riveting, sealing, bonding, and special paint in order to curb the turbulence and air resistance which occur between the sheets. Aluminum alloy 2024 which is widely used for interior and exterior material of aircraft are tested. Jin-young JW-60C wire cutting machine was used in this experiment. In this paper, the experimental investigation has been performed to find out the influence of the surface roughness and surface shape characteristics on the wire-cut EDM of discharge energy in aluminium alloy 2024. The selected experimental parameters are peak current, no-load voltage, off time and feed rate. The experimental results give the guideline for selecting reasonable machining parameters. The high discharge energy on the idle time, almost no change in surface roughness can be seen.

• 환경영향평가
• /
• 제18권6호
• /
• pp.331-346
• /
• 2009

The serious problem facing two-dimensional finite element hydraulic model is the treatment of wet and dry areas. This situation is encountered in most practical river and coastal engineering problems, such as flood propagation, dam break analysis and so on. Especially, dry areas result in mathematical complications and require special treatment. The objective of this study is to investigate the wet and dry parameters that have direct relevance to model performance in situations where inundation of initially dry areas occurs. Several numerical simulations were carried out, which examined the performance of the marsh porosity method of RMA-2 model to investigate for application of parameters. Experimental channel with partly dry side slopes, straight channel with irregular geometry and Han river were performed for tests. As a result of this study, effectively applied marsh porosity method provide a reliable results for flow distribution of wet and dry area, it could be further developed to basis for extending to water quality and sediment transport analysis.

• 감성과학
• /
• 제6권4호
• /
• pp.25-32
• /
• 2003

본 논문은 "풋 스캐너"와 "족압분석 시스템"을 이용하여 획득한 측정 데이터에서 새로운 보행분석 평가 방법을 제안하였다. 기존의 많은 연구자들에 의해서 보행시 발바닥의 육안적 검사와 압력분포의 분석 방법이 많이 논의되었다. 또한 연구자들은 압력곡선, 압력중심 궤적과 압력중심에서의 속도에 관해서 관심을 가져왔다. 그러나 이런 실험결과들은 실험환경과 피험자의 조건에 의해 의존된다. 결론적으로 우리는 이런 문제를 해결하기 위해 특별한 에너지 변수 등을 고려해야만 한다. 운동 에너지와 충격량 변수는 보행 분석에 활용될 수 있으며, 본 논문의 결과는 8명의 피험자들의 실험을 통하여 새로운 변수의 유용성을 확인하였다. 새로운 변수의 유용성을 확인하였다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1997년도 한국감성과학회 연차학술대회논문집
• /
• pp.228-232
• /
• 1997

The special interest should be paid to the analysis of the influences of positive emotions in terms of their possible effects on the dyanmics of autonomic. recovery after the negative affective stimualtion. Taking into account emotion-specific autonomic response patterning and dissociation of parameters of autonomic arousal during experience of both positive and negative emotional states, this problem seems a challenging one. In present study several autonomic parameters were analyzed altogether, namely inedices of electrodermal activity, heart rate and respitation rate during consecutive combination or both IAPS-based visual affective and auditory stimulation. The aim of the study was analysis of patterns of electrodermal and cardiorespiratory responses during emotional states evoked by negative affective visual stimulation followed by positive or neutral auditory one with intention to identify if the latter is able to facilitate post-stress recovery and enhance restoration of pre-arousal levels. The main orientation was dirdcted towards the further application of experimentally induced comfort emotions for dampening the negative consequences of exposure to stressful stimuli.

• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.125-130
• /
• 2004

본 논문에서는 수치적 구성방정식인 연속 탄소성 캡 모델의 정수추정에 관한 방법이 제시되었다. 캡 모델을 이용하여 실제 토질의 거동을 예측하기 위하여서는 캡 모델을 이루는 토질의 물성과 직접적으로 연관된 여덟개의 정수가 결정되어야 한다. 이를 위하여 첫 번째로, Ottawa 모래를 사용하여 표준압밀시험기를 이용한 일축압축시험 및 배수삼축압측 시험이 토질거동의 실제기준값으로서 수행되었고, 두 번째로 탄소성 캡 수치해석모델의 반응을 실내실험값에 일치시키기 위하여 추정된 정수들을 사용한 수치실험이 수행되었다. 두 실험 간의 오차를 최소화하기 위하여 최적화 기법이 사용되었으며, 최적화 후 결정된 8개의 정수는 실내실험결과와 비교되었다. 특히, 수치적 삼축압축시험시 응력계산에 따른 수평변위 측정에 특별한 주의가 필요하다.

• Journal of the Korean Data and Information Science Society
• /
• 제11권2호
• /
• pp.247-255
• /
• 2000

완전이면교배를 블록화하는 매개디자인으로는 일반적으로 부분적으로 균형된 불완비 블록계획을 사용한다. 이때 블록화하는 매개디자인으로 삼각형 PBIBD를 사용하기 위해서는 대응되는 모수를 갖는 삼각형 PBIBD를 찾아야 한다. 특정한 모수를 갖는 균형된 불완비 블록계획의 쌍대계획이 삼각형 PBIBD가 되는 성질을 이용하면 삼각형 PBIBD를 새로 찾아야 하는 번거로움 없이 블록 완전이면교배를 설계할 수 있다. 이를 만족하는 블록 완전이면교배를 설계하는 방법과 디자인을 제시하였다.