• 한국환경과학회지
• /
• 제16권12호
• /
• pp.1401-1409
• /
• 2007

The formation mechanism of the snow cells of the Yellow Sea associated with snowfall over the southwestern part of Korea on 4 February, 2004 has been investigated using special upper-air sounding and radar data obtained for the KEOP(Korea Enhanced Observing Period) Intensive Observing Period(IOP). Results show that the types of snow cells for the selected period are classified into L(Longitudinal)-mode, Low-level convergence, and T(Transverse)-mode with their evolution from L-mode to T-mode. In particular, the existence of low-level warm and humid layer associated with temporally southwesterly inflow for about 4 hours provides a favorable condition in forming the T-mode snow cells. The vertical depth of the T-mode snow cells is deeper than that of L-mode ones due to the southeastward penetration of cold and dry air into relatively warm and humid air. In addition, it is found that wind shear vector between 1000 hPa and 600 hPa is one of the factors which control the orientation of snow cells in formation embedded into the snowbands for the both modes.

• 한국분말재료학회지
• /
• 제12권3호
• /
• pp.186-191
• /
• 2005

A formation of aluminum hydroxide by hydrolysis of nano and micro aluminum powder has been studied. The nano aluminum powder of 80 to 100 nm in diameter was fabricated by a pulsed wire evaporation (PWE) method. The micro powder was commercial product with more than $10\;{\mu}m$ in diameter. The hydroxide type and morphology depending on size of the aluminum powder were examined by several analyses such as XRD, TEM, and BET. The hydrolysis procedure of micro aluminum powder was different from that of nano aluminum powder. The nano aluminum powder after immersing in the water was transformed rapidly to a nano fibrous boehmite, accompanying with a remarkable temperature increase, and then further transformed slowly to a stable bayerite. However, the micro powder was changed to the stable bayerite slowly and directly. The formation of fibrous aluminum hydroxide from nano aluminum powder might be due to the fine cracks which were formed by hydrogen gas pressure on the surface hydroxide layer during hydrolysis. The nano powder with large specific surface area and small size reacted more actively and faster than the micro powder, and transformed to meta-stable hydroxide in relatively short reaction time. Therefore, the formation of fibrous boehmite is special characteristic of hydrolysis of nano aluminum powder.

• 한국실내디자인학회논문집
• /
• 제7호
• /
• pp.38-44
• /
• 1996

To improve and replete many problems which are discovered the present condition and cases of interior architecture education previously, 1) Adopted the sixth semester, the ninth semester of 3 -year course of study as a reform of the school system. 2) Building up Design -basic understandings of design , Design Resources -layout course, factor course and Design Communication three -steps of systematic -educational course of methodical course fro transmitting and 3) Classifying interior space designer , interior factor designer, interior decorator, special -space designer as practical parts. 4) Divided three fields : layout, construction work, factor design , related to interior design works. 5) Also, divided like (Table-2), job-analysis and formation of relating course into layout and construction work. 6) Analyzed and (Table-3) the present condition of four domestic Junior college (Seoul and kyong -ki areas) as a case study. 7) Analyzed and surveyed (Table-4) three American colleges, sixth semester and ninth semester of three year course of study and 8) Have to solidify practical computer education, foreign language education as the terms desired keeping pace with internationalization and the changes of opening periods. 9) As above-mentioned, reenforcing the fundamental education of lower grades and needs fractionizing special education of higher grades. Finally, needs to be prepared the environments which enable to develop the marked educational goals & contents and then be exeucted, which make one do his responsibility after setting out in the world, satisfying a periods wishies : many competent experts that can be produced.

• Computers and Concrete
• /
• 제8권1호
• /
• pp.71-96
• /
• 2011

Existing reinforced concrete (RC) beams can be strengthened with externally bolted steel plates to the sides of beams. The effectiveness of this type of bolted side-plate (BSP) beam can however be affected by partial interaction between the steel plates and RC beams due to the mechanical slip of bolts. To avoid over-estimation of the flexural strength and ensure accurate prediction of the load-deformation response of the beams, the effect of partial interaction has to be properly considered. In this paper, a special non-linear macro-finite-element model that takes into account the effects of partial interaction is proposed. The RC beam and the steel plates are modelled as two different elements, interacting through discrete groups of bolts. A layered method is adopted for the formulation of the RC beam and steel plate elements, while a special non-linear model based on a kinematic hardening assumption for the bolts is used to simulate the bolt group effect. The computer program SiBAN was developed based on the proposed approach. Comparison with the available experimental results shows that SiBAN can accurately predict the partial interaction behaviour of the BSP beams. Further numerical simulations show that the interaction between the RC beam and the steel plates is greatly reduced by the formation of plastic hinges and should be considered in analyses of the strengthened beams.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.517-523
• /
• 2007

For the preparation of tricalciumaluminate $(C_3A)$ clinker, in traditional clinkering method using oxides and carbonates as a raw material, uneconomical repetition of burning have been necessary to avoid the melting of clinker by eutectic reaction in the system $CaO-Al_2O_3$. In this study, special starting raw materials for the clinker burning were prepared from a mixture of oyster shell and aluminium hydroxide by heating to $1100^{\circ}C$ and hydrating at $30^{\circ}C$. The starting raw materials, hardened body with weak hydraulic strength, were mainly composed of $C_3AH_6$ formed by resolution-precipitation mechanism of the system $CaO-Al_2O_3-H_2O$. By heating them, relatively pure $C_3A$ clinker could be obtained by one-time burning at the fairly lower temperature than that of conventional method. The easier formation of $C_3A$ clinker seemed to be caused by higher compositional homogeneity and stoichiometry of the starting materials, high surface area and crystallographic instability of the thermally decomposed products, and the catalytic effect of decomposed moisture on the early-stage crystallization of calciumaluminates. The basic hydration behavior of the clinker was also confirmed.

• 수산경영론집
• /
• 제54권2호
• /
• pp.59-76
• /
• 2023

This study is to propose ways to improve the system for rational procedures for offshore wind power generation projects. The results of this study are summarized as follows. In order to quickly distribute and develop offshore wind power projects, the permitting period should be shortened through special laws, the government actively intervenes to support the formation and operation of privat-public councils to ensure residents' acceptance. In this way, it can be competitive in the future energy market. Above all, a special law (proposal) related to offshore wind power currently pending in the National Assembly should be passed as soon as possible. Finally, the government and local governments that manage public waters should provide active administrative support based on system improvement measures in consideration of these permits, and the project's main body should minimize damage to the marine environment and ecosystem. Through these subject-specific roles, offshore wind power generation will be able to reduce carbon emissions and help establish a sustainable energy production system.

• 한국재료학회지
• /
• 제21권7호
• /
• pp.357-363
• /
• 2011

In this paper, high temperature oxidation behavior of newly developed alloys, Ti-6Al-4Fe and Ti-6Al-1Fe, is examined. To understand the effect of Fe on the air oxidation behavior of the Ti-Al-Fe alloy system, thermal oxidation tests are carried out at $700^{\circ}C$ and $800^{\circ}C$ for 96 hours. Ti-6Al-4V alloy is also prepared and tested under the same conditions for comparison with the developed alloys. The oxidation resistance of the Ti-Al-Fe alloy system is superior to that of Ti-6Al-4V alloy. Ti-6Al-4V shows the worst oxidation resistance for all test conditions. This is not a result of the addition of Fe, but rather it is due to the elimination of V, which has deleterious effects on high temperature oxidation. The oxidation of the Ti-Al-Fe alloy system follows the parabolic rate law. At $700^{\circ}C$, Fe addition does not have a noticeable influence on the amount of weight gain of all specimens. However, at $800^{\circ}C$, Ti-6Al-4Fe alloy shows remarkable degradation compared to Ti-6Al-1Fe and Ti-6Al. It is discovered that the formation of $Al_2O_3$, a diffusion resistance layer, is remarkably hindered by a relative decrease of the ${\alpha}$ volume fraction. This is because Fe addition increases the volume fraction of ${\beta}$ phase within the Ti-6Al-xFe alloy system. Activities of Al, Ti, and Fe with respect to the formation of oxide layers are calculated and analyzed to explore the oxidation mechanism.

• 한국산학기술학회논문지
• /
• 제13권2호
• /
• pp.529-535
• /
• 2012

본 논문은 데이트 쇼 프로그램인 SBS의 <짝>의 텍스트 구성형식에 나타나고 있는 텔레비전 장르의 특성을 통해 텔레비전 장르의 혼종적(hybrid) 포맷에서 나타나는 특징을 살펴보는데 목적이 있다. 텔레비전 프로그램의 혼종적 포맷은 텔레비전 프로그램에서 중요하게 비중을 차지하고 있으며, 리얼리티를 강조하여 수용자에게 볼거리를 제공하는 특징이 있다. 또한 데이트 쇼 프로그램은 수용자의 일상적인 삶과 밀접한 연관성을 가지면서 동시에 출연자와의 동일시를 부추기고 있다는 점에서 중요한 의미가 있다.

• 한국발생생물학회지:발생과생식
• /
• 제19권1호
• /
• pp.1-10
• /
• 2015

The purpose of the present study was to examine the seminiferous epithelium cycle of Bombina orientalis using a light microscope. The cycle was divided into a total of 10 stages, according to the morphological characteristics of the cells. The spermatogenetic cells included primary spermatogonia, secondary spermatogonia, primary spermatocytes, secondary spermatocytes, spermatid and sperm. At stage I, the primary spermatogonia was located closer to basal lamina of the seminiferous tubule without spermatocyst formations. Especially at the stage II, the secondary spermatogonia were located in the spermatocyst. The primary and secondary spermatocytes were found from stages III to VI. The secondary spermatocytes were smaller in size than the primary spermatocytes, but they had thicker nucleoplasm and smaller nuclei. The round-shaped, early sperm cells were formed in stage VII, and further divided at stage VIII to have more concentrated nucleoplasm before division to matured sperm cells. At stage X, the matured sperm cells emerged from the spermatocyst. Considering the above results, this study presented the special characteristics in the generation and type of sperm formation. The germ cell formation occurred in various stages, like the perspectives of Franca et al (1999), ultimately, providing taxonomically useful information.

• 한국농촌건축학회논문집
• /
• 제13권4호
• /
• pp.9-16
• /
• 2011

This study aims to research the local characteristics of layout and floor plan at Hyangkyo Archiecture in Youngseo districts of Gangwon-do. Hyangkyo which were the institutional places of Chosun Dynasty used for stability and order of the dynasty as well as for the education of people. This thesis studies and analyzes the regularity which appears in the formation of architecture mainly in the aspects of layout, plane formality. Jeon-hak-hoo-myo is the arraying formality in which Myungryundang and Daesungjun are placed on a line of one axis with Myungryundang placed lower in the front and Daesungjun place higher in the back and this formality is applied for a land that slopes. The layout formation of Gangkak space is divided into Jeonjaehudang-type and Jeondanghujae-type. This study analyze arrangement type and plane characteristics about local old time school belonging to the Confucian shrine construction at Youngseo districts in Gangwon-do, there is purpose of research to wish to clear the regional special quality of local old time school belonging to the Confucian shrine construction at Youngseo districts in Gangwon-do.