• Journal of Environmental Science International
• /
• v.8 no.3
• /
• pp.309-318
• /
• 1999

In order to fast predict the wind-driven current in a small bay, a convolution method in which the wind-driven current can be generated only wih the local wind is developed and applied in the Sachon Bay. The root mean square(rms) ratio defined as the ratio of the rms error to the rms speed is 0.37. The rms ratio is generally less than 0.2, except for all the mouths of Junju Bay and Namhae-do and in the region between Saryang Island and Sachon. The spatial average of the recover rate of kinetic energy(rrke) is 87%. Thus, the predicted wind-driven current by the convolution model is in a good agreement with the computed one by the numerical model. The raio of the difference between observed residual current (Vr) and predicted wind-driven current (Vc) to a residual current, that is, (Vr-Vc)/Vr shows 56%, 62% at 2 moorings in the Sachon Bay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.628-638
• /
• 2005

The analysis of maximum diversity order and coding gain for multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems over time-and frequency-selective (or doubly-selective) channels is addressed in this paper. A novel channel time-space correlation function is developed given the spatially correlated doubly-selective Rayleigh fading channel model. Based on this channel-model assumption, the upper-bound of pairwise error probability (PEP) for MIMO-OFDM systems is derived under the maximum likelihood (ML) detection. For a certain space-frequency code, we quantify the maximum diversity order and deduce the expression of coding gain. In this wort the impact of channel time selectivity is especially studied and a new definition of time diversity is illustrated correspondingly

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.10a
• /
• pp.13-18
• /
• 2004

In this study, a new method is proposed generating 3D wire-frames of building using the lowest level topology, points, which are input by human operators. Through the procedure, it is possible to make prediction occlusion points and generate the topology automatically among points, lines, surfaces from buildings. In order to adjust the error of initial values which are input manually, the least squares adjustment for model-image fitting is carried out using the edge information of aerial imagery. And also, model fitting procedure is done making all surfaces plane of buildings by the least squares adjustment. As a result of those procedure, 3D building models are refined similar to real figures of buildings.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.6
• /
• pp.7-15
• /
• 2010

Analyses of wind wave characteristics near the Korean marginal seas were performed in 2008 and 2009 by comparisons of an operational wind wave forecast model and ocean buoy data. In order to evaluate the model performance, its results were compared with the observed data from an ocean buoy. The model used in this study was very good at predicting the characteristics of wind waves near the Korean Peninsula, with correlation coefficients between the model and observations of over 0.8. The averaged Root Mean Square Error (RMSE) for 48 hrs of forecasting between the modeled and observed waves and storm surges/tide were 0.540 m and 0.609 m in 2008 and 2009, respectively. In the spatial and seasonal analysis of wind waves, long waves were found in July and September at the southern coast of Korea in 2008, while in 2009 long waves were found in the winter season at the eastern coast of Korea. Simulated significant wave heights showed evident variations caused by Typhoons in the summer season. When Typhoons Kalmaegi and Morakot in 2008 and 2009 approached to Korean Peninsula, the accuracy of the model predictions was good compared to the annual mean value.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.3
• /
• pp.51-64
• /
• 2015

In the present study, we develop two history matching techniques based on Markov chain Monte Carlo method where radial basis function and Gaussian distribution generated by unconditional geostatistical simulation are employed as the random walk transition kernels. The Bayesian inverse methods for aquifer characterization as the developed models can be effectively applied to the condition even when the targeted information such as hydraulic conductivity is absent and there are transient hydraulic head records due to imposed stress at observation wells. The model which uses unconditional simulation as random walk transition kernel has advantage in that spatial statistics can be directly associated with the predictions. The model using radial basis function network shares the same advantages as the model with unconditional simulation, yet the radial basis function network based the model does not require external geostatistical techniques. Also, by employing radial basis function as transition kernel, multi-scale nested structures can be rigorously addressed. In the validations of the developed models, the overall predictabilities of both models are sound by showing high correlation coefficient between the reference and the predicted. In terms of the model performance, the model with radial basis function network has higher error reduction rate and computational efficiency than with unconditional geostatistical simulation.

• Journal of Korea Water Resources Association
• /
• v.50 no.5
• /
• pp.335-346
• /
• 2017

This study generated the radar-based forecasted rainfall using spatial-scale decomposition method (SCDM) and evaluated the hydrological applicability with forecasted rainfall by KMA (MAPLE, KONOS) in terms of urban flood forecasting. SCDM is to separate the small-scale field (convective cell) and large-scale field (straitform cell) from radar rainfield. And each separated field is forecasted by translation model and storm tracker nowcasting model for improvement of QPF accuracy. As the evaluated results of various QPF for three rainfall events in Seoul and Metropolitan area, proposed method showed better prediction accuracy than MAPLE and KONOS considering the simplicity of the methodology. In addition, this study assessed the urban hydrological applicability for Gangnam basin. As the results, KONOS simulated the peak of water depth more accurately than MAPLE and SCDM, however cannot simulated the timeseries pattern of water depth. In the case of SCDM, the quantitative error was larger than observed water depth, but the simulated pattern was similar to observation. The SCDM will be useful information for flood forecasting if quantitative accuracy is improved through the adjustment technique and blending with NWP.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.1
• /
• pp.30-40
• /
• 2011

Numerical simulations were carried out to investigate the impact of SST spatial distribution on the result of air quality modeling. Eulerian photochemical dispersion model CAMx (Comprehensive Air quality Model with eXtensions, version 4.50) was applied in this study and meteorological fields were prepared by RAMS (Regional Atmospheric Modeling System). Three different meteorological fields, due to different SST spatial distributions were used for air quality modeling to assess the sensitivity of CAMx modeling to the different meteorological input data. The horizontal distributions of surface ozone concentrations were analyzed and compared. In each case, the simulated ozone concentrations were different due to the discrepancies of horizontal SST distributions. The discrepancies of land-sea breeze velocity caused the difference of daytime and nighttime ozone concentrations. The result of statistic analysis also showed differences for each case. Case NG, which used meteorological fields with high resolution SST data was most successfully estimated correlation coefficient, root mean squared error and index of agreement value for ground level ozone concentration. The prediction accuracy was also improved clearly for case NG. In conclusion, the results suggest that SST spatial distribution plays an important role in the results of air quality modeling on high ozone episode at coastal region.

• Korea Real Estate Review
• /
• v.28 no.4
• /
• pp.37-51
• /
• 2018

The purpose of this paper is to analyze the effects of location factors on sales by restaurant type in the six districts of Seoul (Jongno-gu, Jung-gu, Yeongdeungpo-gu, Gangnam-gu, Seocho-gu, and Songpa-gu). Ordinary least squares (OLS) regression model is selected for four restaurant types whose spatial autocorrelation is not identified, spatial lag model (SLM) is only selected for seafood restaurant, and spatial error model (SEM) is selected for nine other restaurant types. The floating population and the workers of surrounding businesses have generally positive effects on the sales of restaurants. The floating population elasticity of the sales of restaurants are found to be in the descending order of Oriental food, pub, Western food, and traditional food restaurant, and the elasticity of the workers of surrounding businesses are in the descending order of bakery, Oriental food, and Western food restaurant. The spatial multiplier effects are in the descending order of Oriental food, pub, and Western food restaurant. There is a statistically significant sales gap between roast meat, pub, and bakery in Gangnam-gu and those in five other districts. The results of this research can help in starting a restaurant in that they can provide information on the suitability of location by restaurant type.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.175-190
• /
• 2018

Recently, policy of the marine advanced countries were switched from the preemption using ocean to post-project development. In this study, we suggest improvement and the pending issues when are deducted to the database of the marine spatial information is constructed over the GIS system for the Korean Marine Spatial Planning (KMSP). More than 250 spatial information in the seas of Korea were processed in order of data collection, GIS transformation, data analysis and processing, data grouping, and space mapping. It's process had some problem occurred to error of coordinate system, digitizing process for lack of the spatial information, performed by overlapping for the original marine spatial information, and so on. Moreover, solution is needed to data processing methods excluding personal information which is necessary when produce the spatial data for analysis of the used marine status and minimized method for different between the spatial information based GIS system and the based real information. Therefore, collection and securing system of lacking marine spatial information is enhanced for marine spatial planning. it is necessary to link and expand marine fisheries survey system. It is needed to the marine spatial planning. The marine spatial planning is required to the evaluation index of marine spatial and detailed marine spatial map. In addition, Marine spatial planning is needed to standard guideline and system of quality management. This standard guideline generate to phase for production, processing, analysis, and utilization. Also, the quality management system improve for the information quality of marine spatial information. Finally, we suggest necessity need for the depths study which is considered as opening extension of the marine spatial information and deduction on application model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.143-155
• /
• 2000

With the increasing needs for the integrated use of topographic and cadastral data in order to build an efficient geo-spatial information system. it is urgently necessary to research into its solution. The intention of this study is to detect error types of data and to propose adjustment methods for solving the problems caused by integrating topographic and cadastral data. For this purpose a primary integrated data model is created to link attribute data(land management system) and graphic data within cadastral information in the first step. In next, a secondary integrated data model based on the improved method is formed to coincide the graphic data of cadastral map with that of topographic map. At the first, because a numerous error types md sources caused by separate management of graphic and attribute data are easily checked, it is possible to suggest an improved method to correct these errors using the primary integrated data model. In addition, the accuracy in position and area with coordinate transformation method based on multi-block adjustment is more efficient than rubber-sheeting method. As a result, the secondary integrated data model could be built by harmonizing cadastral map with topographic map using the improved solution.