• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.620-628
• /
• 2005

Spatial control of sound is essential to deliver better sound to the listener's position in space. As it can be experienced in many listening environments, the quality of sound can not be manifested over every position in a hall. This motivates us to control sound in a region we select. The primary focus of the developed method has to do with the brightness and contrast of acoustic image in space. In particular, the acoustic brightness control seeks a way to increase loudness of sound over a chosen area, and the contrast control aims to enhance loudness difference between two neighboring regions. This enables us to make two different kinds of zone - the zone of quiet and the zone of loud sound - at the same time. The other perspective of this study is on the direction of sound. It is shown that we can control the direction of perceived sound source by focusing acoustic energy in wavenumber domain. To begin with, the proposed approaches are formulated for pure-tone case. Then the control methods are extended to a more general case, where the excitation signal has broadband spectrum. In order to control the broadband signal in time domain, an inverse filter design problem is defined and solved in frequency domain. Numerical and experimental results obtained in various conditions certainly validate that the acoustic brightness, acoustic contrast, direction of wave front can be manipulated for some finite region in space and time.

• 대한한방소아과학회지
• /
• 제25권1호
• /
• pp.40-48
• /
• 2011

Objectives: The purpose of this study is to evaluate the effect of Gonjadaesungchimjoongbang on spatial learning abilities and memories in ischemic brain injury. Methods: Rats were separated into three groups; (1) Normal, (2) Saline medication after ischemic brain injuries (control), (3) Gonjadaesungchimjoongbang medication after ischemic brain injuries (experiment). Ischemic brain injuries was induced by MCA occlusion and reperfusion. Morris water maze test was conducted for spatial learning and memory tests. Then, the change of BDNF in the hippocampus($7^{th}$, $14^{th}$ day) was examined by immunohistoche- mistry. Results: In Morris water maze test, spatial learning abilities and memory functioning were considerably increased in the experiment group as oppose to control group on $7^{th}$ and $14^{th}$ day(p<0.01). Moreover, immunohistochemistric response of BDNF in the hippocampus indicated that the more increased immune reaction was found in the experiment group as oppose to the control group on $7^{th}$ and $14^{th}$ day. Conclusions: Gonjadaesungchimjoongbang can improve the learning abilities and memories in ischemic brain injury.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.927-929
• /
• 2015

최근 디지털 시대의 급속 발전과 함께 멀티미디어 관련 영상 장치들이 대중화되고 있다. 영상 데이터는 전송, 저장하는 과정에서 다양한 원인에 의해 잡음이 발생한다. Salt and pepper 잡음을 제거하기 위한 대표적인 필터는 CWMF, AWMF 등이 있으며, 이러한 필터들은 잡음 밀도가 높은 영역에서 잡음 제거 특성이 다소 미흡하다. 따라서 본 논문은 salt and pepper 잡음을 효과적으로 제거하기 위해, 필터링 마스크를 이용한 공간 가중치 필터를 제안하였다.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.532-539
• /
• 2018

Multiple LED arrays can be utilized in visible-light communication (VLC) to improve communication efficiency, while maintaining smart illumination functionality through dimming control. This paper proposes a modulation scheme called "Spatial Intensity Modulation" (SIM), where the effective number of turned-on LEDs is employed for data modulation and dimming control in VLC systems. Unlike the conventional pulse-amplitude modulation (PAM), symbol intensity levels are not determined by the amplitude levels of a VLC signal from each LED, but by counting the number of turned-on LEDs, illuminating with a single amplitude level. Because the intensity of a SIM symbol and the target dimming level are determined solely in the spatial domain, the problems of conventional PAM-based VLC and related MIMO VLC schemes, such as unstable dimming control, non uniform illumination functionality, and burdens of channel prediction, can be solved. By varying the number and formation of turned-on LEDs around the target dimming level in time, the proposed SIM scheme guarantees homogeneous illumination over a target area. An analysis of the dimming capacity, which is the achievable communication rate under the target dimming level in VLC, is provided by deriving the turn-on probability to maximize the entropy of the SIM-based VLC system. In addition, a practical design of dimmable SIM scheme applying the multilevel inverse source coding (MISC) method is proposed. The simulation results under a range of parameters provide baseline data to verify the performance of the proposed dimmable SIM scheme and applications in real systems.

• ETRI Journal
• /
• 제41권5호
• /
• pp.648-657
• /
• 2019

A cluster topology was proposed with the assumption of zero noise to improve the performance of wireless body area networks (WBANs). However, in WBANs, the transmission power should be reduced as low as possible to avoid the effect of electromagnetic waves on the human body and to extend the lifetime of a battery. Therefore, in this work, we consider a bit error rate for a cluster-based WBAN and analyze the performance of the system while the transmission of sensors and cluster headers (CHs) is controlled. Moreover, a hierarchical topology is proposed for the cluster-based WBAN to further improve the throughput of the system; this proposed system is called as the hierarchical cluster WBAN. The hierarchical cluster WBAN is combined with a transmission control scheme, that is, complete control, spatial reuse superframe, to increase the throughput. The proposed system is analyzed and evaluated based on several factors of the system model, such as signal-to-noise ratio, number of clusters, and number of sensors. The calculation result indicates that the proposed hierarchical cluster WBAN outperforms the cluster-based WBAN in all analyzed scenarios.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.485-490
• /
• 2006

In this study, the Digital Surface Models of various spatial resolutions were constructed using LIDAR point data on Digital Photogrammetric System. Then, the accuracies of each DSM's were evaluated using GPS surveying data. And also, observable features were classified and their accuracies were evaluated to verify the availability for Ground Control Point. On Socet Set, Digial Photogrametric System 5 DSM's of which spatial resolutions were 0.15m, 0.5m, 1.0m, 2.5m and 5.0m were constructed and the accuracies of eahc DSM's evaluated in RMSE. The RMSE's of each DSM's were 0.03m, 0.05m, 0.08m, 0.12m and 0,19m. The building feature was observable in DSM's of which spatial resolutions were 0.15m, 0.30m and 0.50m. On the contrary, it could hardly be observed in those of other spatial resolutions. In comparison with the digital map at the scale of 1:1,000, the DSM at the spatial resolution of 0.lim was shifted horizaltally by 0.6m-0.7m of RMSE in each X, Y direction. Therefore, GCP of which horizontal RMSE is better than 1m can be obtained from the DSM at the spatial resolution of 0.15m, of which vertical RMSE is 0.03m-0.19m as the RMSE of DSM. This point cannot be used in aerial triangulation of cartography but can be used for GCP in modeling of satellite image at the moderate resolution.

• 한국통신학회논문지
• /
• 제34권7C호
• /
• pp.654-662
• /
• 2009

모바일 비디오 스트리밍을 위해 비디오 스트림들을 사용가능한 대역폭에 맞추면서 인코딩을 하기 위해서 시간 적 해상도, 공간적 해상도, 화면 화질의 세 가지 요소를 가지고 조절할 수 있는데, 그 중에서도 양자화 파라미터 (quantization parameter)를 가지고 화변 화질을 조절하는 것이 가장 널리 사용되고 있는 방법이다. 그러나 본 논 문에서는 낮은 대역폭 환경에서는 적응적으로 공간적 해상도를 변경하는 것이 화면 화질이나 에너지 소모량 면에서 더 효율적이라는 것을 보이고, 사용 가능한 대역폭에 대해서 최척의 공간적 해상도를 찾기 위한 모델을 제시 한다. 적응적 공간 해상도 제어 기법은 비디오 서버와 모바일 기기 간의 대역폭이 심하게 변화거나, 모바일 기기가 에너지 소모에 민감한 상황에서 특히 효과적이다. 본 기법은 낮은 비트율 상황에서 기존의 방법에 비해 화질을 약 0.5dB 만큼 개선하고, 에너지 소모를 50% 이상 줄일 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.561-565
• /
• 1994

An automatic measuring system of three dimensional shape by a projection method with grating pattern from in optical spatial modulator has been developed. The characteristics of the system were studied. This system is composed of a projector, an optical spatial modulator, a CCD camera, and computer. A liquid crystal is used as the optical spatial modulator. The grating patterns that ire projected on the surface of the object are controlled by the computer connected with the optical spatial modulator. The projector patterns are measured by the CCD camera. The data are transferred to the computer. After a transformation into line data, the data are analyzed to obtain the coordinate of the surface of the object. This system has advantages as follows. (1) It is possible to capture the surface topography without any contact. (2) The time required for the measurements is shorter than the light-section method. (3) An optical spatial modulator using a liquid crystal is possible to control the grating patterns accurately by a computer. Surfaces of a plate and a cylinder were measured. The threshold level had an influence on the measurement. It was shown that this system has adequae accuracy in the measurements.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1418-1425
• /
• 2014

In ultrasonic medical imaging, spatial compounding of images is a technique where ultrasonic beam is steered to examine patient tissues in multiple angles. In the conventional ultrasonic diagnostic imaging, the steering of the ultrasonic beam is achieved electronically using the phased array transducer elements. In this paper, a spatial compounding approach is presented where the ultrasonic probe element is rotated mechanically and the beam steering is achieved mechanically. In the spatial compounding, target position is computed using the value of the rotation axis and the transducer array angular position. However, in the process of the rotation mechanism construction and the control system there arises the inevitable uncertainties in these values. These geometric parameter errors result in the target position error, and the consequence is a blurry compounded image. In order to reduce these target position errors, we present a spatial compounding scheme where error correcting transformation matrices are computed and applied to the raw images before spatial compounding to reduce the blurriness in the compounded image. The proposed scheme is illustrated using phantom and live scan images of human knee, and it is shown that the blurriness is effectively reduced.

• 한국공간구조학회논문집
• /
• 제21권1호
• /
• pp.95-104
• /
• 2021

As people's living standards and cultural standards have developed, interest in culture and art has increased, and the demand for large space structures where people can enjoy art, music, and sports has increased. As it accommodates a large number of personnel, it is most important to ensure safety of large spatial structures, and can be used as a space where people can evacuate in case of a disaster. Large spatial structures should be prepared for earthquake loads rather than wind loads. In addition to damage to the structure due to earthquakes, there are cases in which it was not utilized as a space for evacuation due to the fall of objects installed on top of the structure. Therefore, in this study, the dome-shaped large spatial structure is generalized and the displacement response according to the number of installations, position and mass is analyzed using a tuned mass damper(TMD) that is representative vibration control device.