• 품질경영학회지
• /
• 제43권4호
• /
• pp.521-532
• /
• 2015

Purpose: The purpose of this study is to compare two multivariate cumulative sum (MCUSUM) charts designed for spatio-temporal surveillance in terms of not only temporal detection performance but also spatial detection performance. Method: Experiments under various configurations are designed and performed to test two CUSUM charts, namely SMCUSUM and RMCUSUM. In addition to average run length(ARL), two measures of spatial identification accuracy are reported and compared. Results: The RMCUSUM chart provides higher level of spatial identification accuracy while two charts show comparable performance in terms of ARL. Conclusion: The RMCUSUM chart has more flexibility, robustness, and spatial identification accuracy when compared to those of the SMCUSUM chart. We recommend to use the RMCUSUM chart if control limit calibration is not an urgent task.

• Journal of the Korean Data and Information Science Society
• /
• 제13권2호
• /
• pp.261-270
• /
• 2002

Recently, the demand of the Intelligent Transportation System(ITS) has been increased to a large extent, and a real-time traffic information service based on the internet system became very important. When ITS companies carry out real-time traffic services, they find some traffic data missing, and use the conventional method of reconstructing missing values by calculating average time trend. However, the method is found unsatisfactory, so that we develop a new method based the spatial and spatial-temporal models. A cross-validation technique shows that the spatial-temporal model outperforms the others.

• 한국환경과학회지
• /
• 제13권1호
• /
• pp.27-36
• /
• 2004

Present study analyzed the temporal and spatial characteristics of PM10 pollution in Metropolitan Daegu area based on air pollution monitoring station data and measurements of PM10 concentrations in background area in order to provide essential data for efficient PM10 pollution management. The significant variation of spatial and temporal PM10 concentrations in Daegu area was observed during the study years. The highest maximum PM10 concentration(332 $\mu\textrm{g}$/㎥), average concentration(88 $\mu\textrm{g}$/㎥) and frequency exceeding PM10 daily standard(150 $\mu\textrm{g}$/㎥) were all observed in Namsandong located near a major roadway. The hourly and weekly variations of PM10 concentrations had different pattern for the measurement sites. The monthly and seasonal concentrations exhibited a notable characteristic： the maximum concentration was obtained in spring season, most likely due to Yellow sand effects. Furthermore, this temporal variation of PM10 pollution varied with study site. Meanwhile, the PM10 values measured at the monitoring site, Manchondong, were comparable with those of a control site. The average PM10 concentration ranged from 23 $\mu\textrm{g}$/㎥ to 115 $\mu\textrm{g}$/㎥ with a mean value of 53 $\mu\textrm{g}$/㎥ in the former site and from 22 $\mu\textrm{g}$/㎥ to 91 $\mu\textrm{g}$/㎥ with a mean value of 45 $\mu\textrm{g}$/㎥ in the latter site.

• ETRI Journal
• /
• 제34권5호
• /
• pp.787-790
• /
• 2012

The objective of this research is to design a high-performance NAND flash memory system containing a buffer system. The proposed instruction buffer in the NAND flash memory consists of two parts, that is, a fully associative temporal buffer for temporal locality and a fully associative spatial buffer for spatial locality. A spatial buffer with a large fetching size turns out to be effective for serial instructions, and a temporal buffer with a small fetching size is devised for branch instructions. Simulation shows that the average memory access time of the proposed system is better than that of other buffer systems with four times more space. The average miss ratio is improved by about 70% compared with that of other buffer systems.

• 한국농공학회논문집
• /
• 제65권1호
• /
• pp.1-13
• /
• 2023

Various techniques for bias correction and statistical downscaling have been developed to overcome the limitations related to the spatial and temporal resolution and error of climate change scenario data required in various applied research fields including agriculture and water resources. In this study, the characteristics of three different statistical dowscaling methods (i.e., SQM, SDQDM, and BCSA) provided by AIMS were summarized, and climate change scenarios produced by applying each method were comparatively evaluated. In order to compare the average rainfall characteristics of the past period, an index representing the average rainfall characteristics was used, and the reproducibility of extreme weather conditions was evaluated through the abnormal climate-related index. The reproducibility comparison of spatial distribution and variability was compared through variogram and pattern identification of spatial distribution using the average value of the index of the past period. For temporal reproducibility comparison, the raw data and each detailing technique were compared using the transition probability. The results of the study are presented by quantitatively evaluating the strengths and weaknesses of each method. Through comparison of statistical techniques, we expect that the strengths and weaknesses of each detailing technique can be represented, and the most appropriate statistical detailing technique can be advised for the relevant research.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.104-115
• /
• 2003

It is well known that Multiple Input Multiple Output (MIMO) systems offer the promise of achieving very high spectrum efficiencies (many tens of bit/s/Hz) in a mobile environment. The gains in MIMO capacity are sensitive to the presence of spatial and temporal correlation introduced by the radio environment. In this paper, we examine how MIMO capacity is influenced by a number of factors e.g., a) temporal correlation b) various combinations of low/high spatial correlations at either end, c) combined spatial and temporal correlations. In all cases, we compare the channel capacity that would be achievable under independent fading. We investigate the behaviour of "capacity fades," examine how often the capacity experiences the fades, develop a method to determine level crossing rates and average fade durations and relate these to antenna numbers. We also evaluate the influence of channel correlation on the capacity autocorrelation and assess the fit of a Gaussian random process to the temporal capacity sequence. Finally we note that the particular spatial correlation structure of the MIMO channel is influenced by a large number of factors. For simplicity, it is desirable to use a single overall correlation measure which parameterizes the effect of correlation on capacity. We verify this single parameter concept by simulating a large number of different spatially correlated channels.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.945-951
• /
• 2008

공간적 지역성(spatial locality) 및 시간적 지역성(temporal locality)을 동시에 향상시킬 수 있는 새로운 고성능 데이터 캐시 구조를 제안한다. 제안된 캐시 메모리는 하드웨어 프리패치 유닛과 큰 블록 크기를 갖는 직접사상(DM: direct mapped) 캐시와 작은 블록 크기를 갖는 완전 사상(FA: fully associative) 캐시의 하위 캐시 유닛으로 구성된다. 공간적 지역성은 블록 데이터를 패치하여 직접 사상 캐시에 저장함으로써 보장되며, DM 캐시 히트가 발생한 경우에 그 이웃 데이터 블록을 프리패치 함으로써 최적화 된다. 시간적 지역성은 작은 블록 데이터가 DM 캐시로부터 제거 될때 그 블록의 과거 기록에 따라서 중요한 데이터는 완전사상 캐시에 저장함으로써 보장된다. Spec2000 벤치 마크 프로그램에 대한 실험 결과에 의하면 제안된 캐시 구조는 비슷한 크기의 직접사상 캐쉬, 4웨이 연관사상(4 way set associative cache) 및 SMI(selective-mode intelligent cache) 캐쉬 [8]등의 기존의 구조에 비해서 미스 비율(miss rate)을 평균적으로 $12.53\sim23.62%$ 그리고 AMAT(average memory access time)를 평균적으로 $14.67\sim18.60%$ 줄일 수 있음을 증명하였다.

• 한국대기환경학회지
• /
• 제32권1호
• /
• pp.114-126
• /
• 2016

Many cohort studies have reported associations of individual-level long-term exposures to $PM_{10}$ and health outcomes. Individual exposures were often estimated by using exposure prediction models relying on $PM_{10}$ data measured at national regulatory monitoring sites. This study explored spatial and temporal characteristics of regulatory $PM_{10}$ measurement data in South Korea and suggested $PM_{10}$ concentration metrics as long-term exposures for assessing health effects in cohort studies. We obtained hourly $PM_{10}$ data from the National Institute of Environmental Research for 2001~2012 in South Korea. We investigated spatial distribution of monitoring sites using the density and proximity in each of the 16 metropolitan cities and provinces. The temporal characteristics of $PM_{10}$ measurement data were examined by annual/seasonal/diurnal patterns across urban background monitoring sites after excluding Asian dust days. For spatial characteristics of $PM_{10}$ measurement data, we computed coefficient of variation (CV) and coefficient of divergence (COD). Based on temporal and spatial investigation, we suggested preferred long-term metrics for cohort studies. In 2010, 294 urban background monitoring sites were located in South Korea with a site over an area of $415.0km^2$ and distant from another site by 31.0 km on average. Annual average $PM_{10}$ concentrations decreased by 19.8% from 2001 to 2012, and seasonal $PM_{10}$ patterns were consistent over study years with higher concentrations in spring and winter. Spatial variability was relatively small with 6~19% of CV and 21~46% of COD across 16 metropolitan cities and provinces in 2010. To maximize spatial coverage and reflect temporal and spatial distributions, our suggestion for $PM_{10}$ metrics representing long-term exposures was the average for one or multiple years after 2009. This study provides the knowledge of all available $PM_{10}$ data measured at national regulatory monitoring sites in South Korea and the insight of the plausible longterm exposure metric for cohort studies.

• 한국컴퓨터정보학회논문지
• /
• 제16권2호
• /
• pp.1-8
• /
• 2011

NAND형 플래시 메모리는저전력, 저렴한 가격, 그리고 대용량 저장매체로 하드디스크 대용을 위하여 많은 연구가 이루어지고 있다. 특히 기존의 캐쉬 구조인 버퍼 시스템을 이용한 플래시 메모리의 성능향상 연구가 이루어지지만 대부분이 데이터 관련 연구이다. 따라서 본 연구에서는 기존의 캐쉬 구조의 버퍼를 이용한 고성능 명령어 플래시 메모리를 구현하였다. 제안된 명령어 플래시 메모리 시스템은 분기 명령어를 위한 시간적 버퍼(victim buffer), 명령어의 대표적인 특징인 순차적 인출을 위한 공간적 버퍼(spatial buffer)로 이루어져 있다. 즉, 제안된 명령어 플래시 메모리의 공간적 버퍼는 큰 페칭 크기를 가지므로 명령어의 순차적 인출에 효과적이며, 작은 페칭 크기를 가지는 시간적 버퍼는 공간적 버퍼에 참조된 명령어를 저장하게 되므로 다시 참조를 위한 분기 명령어에 효과적이다. 시뮬레이션 결과 평균 접근 실패율의 경우 미디어 응용군에 대해 4배 크기의 2-웨이 버퍼, 희생 버퍼, 그리고 2배 크기의 완전연관 버퍼에 비해 평균 77% 감소 효과를 얻을 수 있었다.

• 전기전자학회논문지
• /
• 제20권1호
• /
• pp.31-44
• /
• 2016

본 논문에서는 자유 시점 텔레비전에서 시점 합성 영상 획득을 위해 시공간적 배경 정보 추정 기반 홀 채움 방식을 제안한다. 신뢰할 수 있는 시간적 배경 정보를 획득하기 위해 새로운 배경 코드북의 구성 및 갱신하는 과정을 수행한다. 더불어, 공간적인 국부 배경 정보 추정을 위해 홀 영역의 배경 및 전경 영역의 구별 및 갱신 과정을 수행한다. 추정된 시공간 배경 정보를 조합하여 홀 채움 과정을 수행하고, 잔여 홀 채움을 수행하기 위해 깊이 배경 정보를 이용한 우선순위 함수를 결정하여 표본 기반 인페인팅 기법을 적용한다. 실험 결과를 통해 제안 방식은 기존방식들과 비교하여 평균 0.3~0.6dB의 성능 향상이 있음을 확인하였으며, 동영상 특성 및 홀 형태에 관계없이 제안된 방식이 새로운 시점 영상을 효과적으로 합성할 수 있음을 확인할 수 있었다.