• 제목/요약/키워드: Spatial Sensitivity

검색결과 423건 처리시간 0.024초

방사성 물질 감시를 위한 부호화 구경 감마카메라 개발 (Development of a Coded-aperture Gamma Camera for Monitoring of Radioactive Materials)

  • 조규성;신형주;지용기;윤정현
    • Journal of Radiation Protection and Research
    • /
    • 제29권4호
    • /
    • pp.257-261
    • /
    • 2004
  • 핀홀 감마카메라의 민감도를 향상시키기 위하여 픽셀화된 CsI(Tl) 섬광체와 위치민감형 광증배관을 이용하여 부호화 구경 감마카메라를 개발하였다. Rounded-hole로 이루어진 $13{\times}11$ 픽셀구조의 개조된 uniformly reductant array (URA) 가 계측기의 공간해상도를 고려하여 부호화된 마스크로 선택되었다. 부호화된 구경 카메라와 핀홀 카메라의 성능을 비교하기 위하여 Tc-99m 소스의 여러 가지 형태를 이용하여 테스트 하였으며, 신호 대 잡음비 또는 민감도의 향상에 대한 카메라의 성능을 분석하였다. 그 결과 공간해 상도에 있어서 약간의 저하가 있었으나 영상의 질은 매우 향상되었다. 비록 카메라의 개발과 테스트가 저에너지 영역에서 이루어졌지만, 부호화 구경 카메라의 구상은 방사성 물질 감시 그리고 다른 응용들에 있어서도 효과적으로 사용되어질 수 있을 것이다.

시력교정술 후 써클콘택트렌즈 착용 시 대비감도 및 눈부심감도 변화 (The Changes in Contrast Sensitivity and Glare Sensitivity when Wearing Circle Contact Lenses after the Refractive Surgery)

  • 권기남;박상희;김소라;박미정
    • 한국안광학회지
    • /
    • 제21권1호
    • /
    • pp.23-34
    • /
    • 2016
  • 목적: 본 연구에서는 써클콘택트렌즈의 착용이 시력교정술을 받은 눈에서의 대비감도 및 눈부심감도에 미치는 영향을 알아보고자 하였다. 방법: 시력교정술을 받지 않은 40안과 시력교정술을 받은 30안에 무도수의 써클콘택트렌즈를 착용시킨 후 CGT-1000을 이용하여 대비감도와 눈부심감도를 평가하였으며, 동공크기를 측정하여 대비감도 및 눈부심감도와 동공크기와의 상관관계를 분석하였다. 결과: 시력교정술을 받은 경우 써클콘택트렌즈 착용으로 고영역대 공간주파수에서는 대비감도의 저하가 나타났으며 시력교정술을 받지 않은 군보다 그 정도가 더 크게 나타났다. 써클콘택트렌즈 착용으로 인해 동공크기와 대비감도 변화와의 상관성이 작아졌으며 시력교정술을 받은 군에서 상관성이 더 작아졌다. 또한, 써클콘택트렌즈 착용은 눈부심에 더 크게 영향을 미치는 것으로 나타났으며, 동공크기에 따른 눈부심감도의 변화분석에서도 시력교정술을 받지 않은 군에서 눈부심을 더 크게 느끼는 것으로 나타났다. 시력교정술을 받은 각막에서의 써클콘택트렌즈는 각막의 중심부에 위치하지 못하였다. 결론: 본 연구에서는 시력교정술 후 써클콘택트렌즈 착용으로 인해 대비감도가 저하되며 눈부심이 증가되므로 이에 대한 충분한 이해와 고려가 필요함을 제안한다.

Viaduct seismic response under spatial variable ground motion considering site conditions

  • Derbal, Rachid;Benmansour, Nassima;Djafour, Mustapha;Matallah, Mohammed;Ivorra, Salvador
    • Earthquakes and Structures
    • /
    • 제17권6호
    • /
    • pp.557-566
    • /
    • 2019
  • The evaluation of the seismic hazard for a given site is to estimate the seismic ground motion at the surface. This is the result of the combination of the action of the seismic source, which generates seismic waves, the propagation of these waves between the source and the site, and site local conditions. The aim of this work is to evaluate the sensitivity of dynamic response of extended structures to spatial variable ground motions (SVGM). All factors of spatial variability of ground motion are considered, especially local site effect. In this paper, a method is presented to simulate spatially varying earthquake ground motions. The scheme for generating spatially varying ground motions is established for spatial locations on the ground surface with varying site conditions. In this proposed method, two steps are necessary. Firstly, the base rock motions are assumed to have the same intensity and are modelled with a filtered Tajimi-Kanai power spectral density function. An empirical coherency loss model is used to define spatial variable seismic ground motions at the base rock. In the second step, power spectral density function of ground motion on surface is derived by considering site amplification effect based on the one dimensional seismic wave propagation theory. Several dynamics analysis of a curved viaduct to various cases of spatially varying seismic ground motions are performed. For comparison, responses to uniform ground motion, to spatial ground motions without considering local site effect, to spatial ground motions with considering coherency loss, phase delay and local site effects are also calculated. The results showed that the generated seismic signals are strongly conditioned by the local site effect. In the same sense, the dynamic response of the viaduct is very sensitive of the variation of local geological conditions of the site. The effect of neglecting local site effect in dynamic analysis gives rise to a significant underestimation of the seismic demand of the structure.

3D-FEMWATER 모델을 이용한 대창지역의 해수침투 범위추정 (Estimation of Seawater Intrusion Range in the Daechang Area Using 3D-FEMWATER Model)

  • 김경호;박재성;이호충;연주흠
    • 한국농공학회논문집
    • /
    • 제47권5호
    • /
    • pp.3-13
    • /
    • 2005
  • The present study examined the 3 dimensional space distribution characteristics of sea water intrusion using data available from previous observations. For this study, we used 3D FEMWATER, which is a 3 dimensional finite element model. The target area was around Daechang-ri, Gimje-si, Jeollabuk-do. The area is relatively easy to formulate a conceptual model and has observation wells in operation for surveying sea water intrusion. Considering the uncertainty of numerical simulation, we analyzed sensitivity to hydraulic conductivity, which has a relatively higher effect. According to the result of the analysis, the variation of TDS concentration had an error range of $-1,336{\~}+107 mg/{\iota}$. Taking note that the survey data from observation wells were collected when the boundary between fresh water and sea water in the aquifer was in equilibrium, we set the range of time for numerical simulation and estimated the spatial distribution of TDS concentration as the range of sea water intrusion. According to the result of estimation, the spatial distribution of TDS concentration calculated when 1,440 days were simulated was taken as the range of sea water intrusion. Using the result of calculation, we can draw not only vertical views for a certain section but also horizontal views of different depth. These views will be greatly helpful in understanding the spatial distribution of the range of sea water intrusion. In addition, the result of this study can be used rationally in proposing an optimal quantity of water pumping through investigating the moving route of sea water intrusion over time in order to prevent excessive water pumping and to maintain an optimal number of water pumping wells per interval.

비선형 대기 모형에서 수치 해의 시간 간격 민감도 (Sensitivity of Numerical Solutions to Time Step in a Nonlinear Atmospheric Model)

  • 이현호;백종진;한지영
    • 한국지구과학회지
    • /
    • 제34권1호
    • /
    • pp.51-58
    • /
    • 2013
  • 대기 모델링 연구에서 시간 간격을 적절하게 결정하는 것은 중요한 문제이다. 본 연구에서는 비선형 대기 모형에서 수치 해의 시간 간격에 대한 민감도를 조사하였다. 이를 위해 간단한 무차원화된 역학 모형을 사용하여 시간 간격과 비선형성 인자를 바꾸어가며 수치 실험을 수행하였다. 실험 결과, 비선형성 인자가 영향을 줄 만큼 크지 않고 절단 오차를 무시할 수 있는 경우에는 수치 해가 시간 간격에 민감하지 않았다. 그러나 비선형성 인자가 큰 경우에는 수치 해가 시간 간격에 민감한 것으로 밝혀졌다. 이 경우, 시간 간격이 감소할수록 공간 필터의 강도가 증가하여 작은 규모의 현상이 약하게 모의되었다. 이는 일반적으로 시간 간격이 감소하면 절단 오차가 감소하여 더 정확한 수치 해가 도출된다는 사실과 상충한다. 이러한 충돌은 비선형 모형의 수치 해를 안정하게 하기 위해 공간 필터가 반드시 필요하기 때문에 피할 수 없다.

CT performance phantom을 이용한 cone beam형 전산화단층영상의 특성 (Image characteristics of cone beam computed tomography using a CT performance phantom)

  • 한충완;김규태;최용석;황의환
    • Imaging Science in Dentistry
    • /
    • 제37권3호
    • /
    • pp.157-163
    • /
    • 2007
  • Purpose: To evaluate the characteristics of (widely used) cone beam computed tomography (CBCT) images. Materials and Methods: Images were obtained with CT performance phantoms (The American Association of Physicists in Medicine; AAPM). CT phantom as the destination by using PSR $9000N^{TM}$ dental CT system (Asahi Roentgen Ind. Co., Ltd., Japan) and i-CAT CBCT (Imaging Science International Inc., USA) that have different kinds of detectors and field of view, and compared these images with the CT number for linear attenuation, contrast resolution, and spatial resolution. Results: CT number of both PSR $9000N^{TM}$ dental CT system and i-CAT CBCT did not conform to the base value of CT performance phantom. The contrast of i-CAT CBCT is higher than that of PSR $9000N^{TM}$ dental CT system. Both contrasts were increased according to thickness of cross section. Spatial resolution and shapes of reappearance was possible up to 0.6 mm in PSR $9000N^{TM}$ dental CT system and up to 1.0 mm in i-CAT CBCT. Low contrast resolution in region of low contrast sensitivity revealed low level at PSR $9000N^{TM}$ dental CT system and i-CAT CBCT. Conclusion: CBCT images revealed higher spatial resolution, however, contrast resolution in region of low contrast sensitivity was the inferiority of image characteristics.

  • PDF

Pixelated Breast-Specific Gamma Imaging(BSGI) 감마 카메라를 이용한 갑상선 검사의 유용성 평가 (The Evaluation of Usefulness of Pixelated Breast-Specific Gamma Imaging in Thyroid scan)

  • 정은미;성지혜;유희재
    • 핵의학기술
    • /
    • 제15권1호
    • /
    • pp.90-93
    • /
    • 2011
  • Pixelated BSGI 감마카메라는 높은 분해능과 민감도를 특징으로 하며, 좁은 FOV로 인하여 검출기와 장기간의 거리를 최소화 할 수 있는 장점이 있다. 따라서, 국소 장기인 갑상선, 부갑상선, 담낭 등의 검사에 유용하다고 알려져 있다. 일반적으로 핵의학 검사에서 감마카메라를 사용하여 국소 장기를 영상화할 때 상의 크기를 확대하고, 우수한 분해능을 획득하고자 바늘구멍 조준기(Pinhole Collimator)를 사용한다. 이에 본 연구에서는 대표적인 국소장기인 갑상선 검사를 대상으로 바늘구멍 조준기로 획득한 영상 과 Pixilated BSGI 감마카메라로 획득한 영상을 비교하여 갑상선 검사 시 Pixilated Breast-Specific Gamma Imaging(BSGI) 감마카메라의 유용성을 평가 하였다. $^{99m}TcO_4^-$을 넣은 갑상선 팬텀을 이용 하였다. 바늘구멍 조준기를 장착한 INFINIA 감마카메라와 저 에너지 고 분해능용 평행다중구멍 조준기를 장착한 Pixelated BSGI 감마카메라에서 300 sec 또는 100 kcts로 설정 후 영상을 획득하였다. 모든 영상 획득은 현재 서울아산병원에서 실제 환자에게 적용하고 있는 갑상선 검사 절차와 동일한 방법으로 시행하였다. 그 결과 INFINIA 감마카메라와 Pixelated BSGI 감마카메라의 갑상선 팬텀 영상을 비교한 결과 Pixellated BSGI 감마카메라에서 갑상선 팬텀의 열소(hot spot)와 냉소(cold spot)의 구분을 더욱 명확하게 확인 할 수 있었다. 갑상선 검사시 Pixilated BSGI 감마카메라는 영상획득 시간을 단축시킬 수 있을 뿐만 아니라 더 나아가 투여하는 방사성의약품의 양을 줄임으로써 환자의 피폭을 경감 시킬 수 있다. 촬영시간의 단축은 환자의 호흡 및 움직임을 최소화하여 더 좋은 영상을 얻을 수 있다. 또한 Pixelated BSGI 감마카메라의 검출기는 작고 다양한 회전이 가능하므로 장기와 검출기 사이 거리를 최소화 할 수 있고, 장비자체의 이동도 가능하므로 환자의 이동이 불가 한 경우 매우 유용하다. 그러나 이러한 장점에도 불구하고 Pixelated (BSGI) 감마카메라는 방사성의약품의 집적이 매우 낮은 유방 촬영 전용으로 제작했기 때문에 2000 cts/s 이상에서는 불감시간 효과가 발생한다. 따라서 Pixelated BSGI 감마카메라를 핵의학 갑상선 검사에 적용할 경우 방사성의약품의 투여량의 조절과 영상획득 시간의 조정에 대한 연구가 더 필요할 것으로 사료된다.

  • PDF

지형자료 해상도에 따른 대기 유동장 변화에 관한 수치 연구 (Numerical Study on Atmospheric Flow Variation Associated With the Resolution of Topography)

  • 이순환;김선희;류찬수
    • 한국환경과학회지
    • /
    • 제15권12호
    • /
    • pp.1141-1154
    • /
    • 2006
  • Orographic effect is one of the important factors to induce Local circulations and to make atmospheric turbulence, so it is necessary to use the exact topographic data for prediction of local circulations. In order to clarify the sensitivity of the spatial resolution of topography data, numerical simulations using several topography data with different spatial resolution are carried out under stable and unstable synoptic conditions. The results are as follows: 1) Influence of topographic data resolution on local circulation tends to be stronger at simulation with fine grid than that with coarse grid. 2) The hight of mountains in numerical model become mote reasonable with high resolution topographic data, so the orographic effect is also emphasized and clarified when the topographic data resolution is higher. 2) The higher the topographic resolution is, the stronger the mountain effect is. When used topographic data resolution become fine, topography in numerical model becomes closer to real topography. 3) The topographic effect tends to be stronger when atmospheric stability is strong stable. 4) Although spatial resolution of topographic data is not fundamental factor for dramatic improvement of weather prediction accuracy, some influence on small scale circulation can be recognized, especially in fluid dynamic simulation.

Evaluation of soil spatial variability by micro-structure simulation

  • Fei, Suozhu;Tan, Xiaohui;Wang, Xue;Du, Linfeng;Sun, Zhihao
    • Geomechanics and Engineering
    • /
    • 제17권6호
    • /
    • pp.565-572
    • /
    • 2019
  • Spatial variability is an inherent characteristic of soil, and auto-correlation length (ACL) is a very important parameter in the reliability or probabilistic analyses of geotechnical engineering that consider the spatial variability of soils. Current methods for estimating the ACL need a large amount of laboratory or in-situ experiments, which is a great obstacle to the application of random field theory to geotechnical reliability analysis and design. To estimate the ACL reasonably and efficiently, we propose a micro-structure based numerical simulation method. The quartet structure generation set algorithm is used to generate stochastic numerical micro-structure of soils, and scanning electron microscope test of soil samples combined with digital image processing technique is adopted to obtain parameters needed in the QSGS algorithm. Then, 2-point correlation function is adopted to calculate the ACL based on the generated numerical micro-structure of soils. Results of a case study shows that the ACL can be estimated efficiently using the proposed method. Sensitivity analysis demonstrates that the ACL will become stable with the increase of mesh density and model size. A model size of $300{\times}300$ with a grid size of $1{\times}1$ is suitable for the calculation of the ACL of clayey soils.

Spatial and Temporal Electrodynamics in Acuzones: Test-Induced Kinematics and Synchronous Structuring. Phenomenological Study

  • Babich, Yuri F.;Babich, Andrey Y.
    • Journal of Acupuncture Research
    • /
    • 제38권4호
    • /
    • pp.300-311
    • /
    • 2021
  • Background: So far there is no confidence in the basics of acupoint/meridian phenomena, specifically in spatial and temporal electrical manifestations in the skin. Methods: Using the skin electrodynamic introscopy, the skin areas of 32 × 64 mm2 were monitored for spectral electrical impedance landscape with spatial resolution of 1 mm, at 2 kHz and 1 MHz frequencies. The detailed baseline and 2D test-induced 2 kHz-impedance phase dynamics and the 4-parameter time plots of dozens of individual points in the St32-34 regions were examined in a healthy participant and a patient with mild gastritis. Non-thermal stimuli were used: (1) (for the sick subject), microwaves and ultraviolet radiation applied alternately from opposite directions of the meridian; and (2) (for the healthy one) microwaves to St17, and cathodic/anodic stimulation of the outermost St45, alternately. Results: In both cases, the following phenomena have been observed: emergence of in-phase and/or antiphase coherent structures, exceeding the acupoint conditional size of 1 cm; collective movement along the meridian; reversible with a reversed stimulus; counter-directional dynamics of both whole structures and adjacent points; local abnormalities in sensitivity and dynamics of the 1 MHz and 2 kHz parameters indicating existence of different waveguide paths. Conclusion: It is assumed that these findings necessitate reconsideration of some basic methodological issues regarding neurogenic/acupuncture points as spatial and temporal phenomena; this requires development of an appropriate approach for identifying the acuzones patterns. These findings may be used for developing new approaches to personalized/controlled therapy/treatment.