• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.65-72
• /
• 2012

In this stury, control performance of tuned mass damper (TMD) with torsional rigidity for an eccentric structure showing torsional responses is investigated. To this end, an eccentric structure subjected to earthquake excitation is used to evaluate the control performance of torsional TMD by varying installed location and torsional rigidity of TMD, To reduce computational time required for repetitive time history analysis of an example structure having non-proportional damping system due to TMD, an equivalent analytical model is used in this study. Torsional properties of TMD usually neglected in typical TMD are verified to be effective in reduction of torsional responses of the eccentric structure. In the case of eccentric structures, it has been seen that the center of a plane of a structure may not be optimal location of TMD.

• Journal of the Korean housing association
• /
• v.21 no.4
• /
• pp.1-9
• /
• 2010

Since the active enhancement of large-scale apartment development in 1970, apartment complexes in Korea have shown considerable changes throughout, with respect to its planning and design. Depending on the government legislations, and economical and social issues of its time, apartments have been designed to respond to varying demands of the society; from minimal unit design to overall masterplan. As existing researches regarding development of apartment planning are conducted in individual and distinct manner, not only is it difficult to find cases of an overall critical analysis of apartment complexes, it is also rare to look for research that deals with a greater urban context, nor the geographical location of the site. With specific focus on apartments in the metropolitan, the focus of this research lies in critically analyzing the qualities of outdoor spaces within an apartment complex, its generational change and interpreting the value it holds for the society. With regards to analyzing its outdoor features, the core of this study deals with applying space syntax, based on the configurational properties of spatial constituents. The results of this research have some implications that the accessibility change of apartment outdoor spaces was examined through quantitative analysis, and the changes of it by time were clarified in detail. And objective and quantitative approaches were employed for an alternative to the methods used in existing related researches.

• Korean Institute of Interior Design Journal
• /
• no.27
• /
• pp.152-161
• /
• 2001

At the multi-cultural society, research is needed to encourage a social atmosphere for enhanced understanding and respect for different cultures & countries. The purpose was to analyze the characteristics of spatial arrangement, space connection, Interior decoration and the relationship among these three features, which showed each country's unique housing form tradition. Three representative cases of historic residences from each country were selected on the basis of a recognized historic architecture directory. Total 18 residences from 6 countries - Korea, China, Japan, Rome, Egypt, and Italy - were comparatively analyzed. As results, aspects generally found in Eastern countries, were the fence as the semi-open boundary between the inside and the outside of the house, the flexibility of spatial opening and partitions between rooms, and finally simple and movable decoration features. On the other hands, aspects appeared in Western countries, were the outer wall of the building as the boundary to the outside, the closed and fixed properties of the room partitions, and finally complex and fixed decoration features. The research also showed that even within the same culture, the degree of openness varied. Each feature of space was related and could be explained within the same context. Housing, regardless of country and culture, tried to accommodate the exterior space inside the building as much as possible. The common pursuit was transformed to various visible forms and its reason might be due to different socio-cultural and environmental backgrounds that need to be continuously explored in academic area.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.341-352
• /
• 2001

This study was carried out to developed that appraisement model of Potential Productivity Index(PPI). PPI model was used Farmland Productivity Index(FPI) and Labor Productivity Index(LPI) by GIS, and PPI model applied to farm land consolidation region which has been completed recently. FPI was determined by overlapping Poly Grid of the soil properties at the analyzed project region. LPI was estimated by addition productive wages ratio of total direct productive cost. Addition productive wages determined by GIS Network analysis GIS Network analysis of working distance between farm house to paddy and each paddy. PPI variation of each the analyzed paddy of Masu and Weoncheon region was 0.967~0.780 respectively, and could be showed relative largely PPI value. PPI will provide basic element for large scaling and gathering of farm land and a substitute lot of farm land consolidation, and will be maximize productivity of paddy.

• Spatial Information Research
• /
• v.19 no.2
• /
• pp.29-36
• /
• 2011

This study performed quantitative assessment of the performance of adjustment models by a-priori analysis of the statistics of the surface parameter estimates against modeling factors. Lidar, airborne imagery, and SAR imagery have been used to acquire the earth surface elevation, where the shape properties of the surface need to be determined through neighboring observations around target location. In this study, parameters which are selected to be estimated are elevation, slope, second order coefficient. In this study, several factors which are needed to be specified to compose adjustment models are classified into three types: mathematical functions, kernel sizes, and weighting types. Accordingly, a-priori standard deviations of the parameters are computed for varying adjustment models. Then their corresponding confidence regions for both the standard deviation of the estimate and the estimate itself are calculated in association with probability distributions. Thereafter, the resulting confidence regions are compared to each other against the factors constituting the adjustment models and the quantitative performance of adjustment models are ascertained.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.61-68
• /
• 2009

This paper is concerned with the investigation of the structural behavior of waffle structure. Parametric variation on waffle floor thickness, main beam depth and column sizes are imposed to study the effects on mode shapes and natural frequencies of waffle structures. Comparisons between FEM models using shell and 3D-solid elements have also been made. The analysis result has shown that the mode frequencies increase with i) increase in main beam depth at level 2 and ii) decrease in waffle slab thickness at level 3. Both 3D and 2D model shown similar mode shapes. Besides, there is a consistent difference in mode frequencies between 3D and 2D model ranging from 25% to 36%.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.5
• /
• pp.57-65
• /
• 2007

After measuring wind induced response for a high-rise steel building, the damping ratio and natural frequency were analyzed in this paper. In order to examine amplitude dependence, random decrement method was used. Two methods were analyzed by comparing dynamic properties from random decrement method and half powered-band width method. In addition, through serviceability evaluation during strong wind, compatibility of two methods to Japanese guidelines for the evaluation of habitability to building vibration and national building code of Canada was considered. The amplitude dependence of the damping ratio by RD method was shown and the amplitude dependence of the natural frequency was relatively very small in an aspect of engineering sense. Moreover, the measured building was satisfied with serviceability and Japanese guideline is stricter than NBCC code.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.2
• /
• pp.83-91
• /
• 2013

The core aim of this dissertation is to empirically scrutinize a strength characteristic of beam-column frame subjected to the cyclic lateral load, a beam-column frame of un-reinforced masonry wall, and a shear wall frame. First and foremost, I embark upon making three prototypes vis-$\grave{a}$-vis this research. By conducting this process, I touch on an analysis of cyclic behavior and a damage characteristic of the beam-column frame, the beam-column frame of un-reinforced masonry wall, and the shear wall frame. What is more, through the previous procedure, the next part delves into the exact stress transfer path and the destructive mechanism to examine how much and how strong the beam-column frame of un-reinforced Masonry Wall does have a resistance capacity against earthquake in all the architecture constructed by the above-mentioned frame, as well as school buildings. In addition to the three prototypes, two more experimental models, a beam-column frame and shear wall frame, are used to compare with the beam-column frame of un-reinforced masonry wall. Lastly, the dissertation will suggest some solutions to improve the resistance capacity against earthquake regarding all constructions built with non bearing wall following having examining precisely all the analysis with regard to not only behavior properties and the damage mechanism of the beam-column frame and the beam-column frame of un-reinforced Masonry Wall but also the resistance capacity against earthquake of non bearing wall and school buildings.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.139-143
• /
• 2015

We describe a survey of nearby core-collapse supernova (SN) explosion sites using integral field spectroscopy (IFS) techniques, which is an extension of the work described in Kuncarayakti et al. (2013). The project aims to constrain SN progenitor properties based on the study of the immediate environment of the SN. The stellar populations present at the SN explosion sites are studied by means of integral field spectroscopy, which enables the acquisition of both spatial and spectral information of the object simultaneously. The spectrum of the SN parent stellar population gives an estimate of its age and metallicity. With this information, the initial mass and metallicity of the once coeval SN progenitor star are derived. While the survey is mostly done in optical, the additional utilization of near-infrared integral field spectroscopy assisted with adaptive optics (AO) enables us to examine the explosion sites in high spatial detail, down to a few parsecs. This work is being carried out using multiple 2-8 m class telescopes equipped with integral field spectrographs in Chile and Hawaii.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.197-202
• /
• 2011

This study introduces a technique to merge three different sea surface temperature(SST) data obtained from multi-satellite sensors. NGSST algorithm, the most popular method of related society, estimates a center pixel of target SST using temporal and spatial correlations, excluding SST accuracies according to sensing methods or properties of satellites. We suggest a merging method of SST to consider the accuracy by satellite or sensor with a comparison with NGSST method. The data used for a merged daily SST with spatial resolution of 5 km was applied from three different satellite sensors such as MODIS, AVHRR and AMSR-E from April 2 to 4, 2011 around the southern coast of Korea. Results of the comparisons showed that the new method is higher than the NGSST method and its STDEV represents a comparatively low value. In future we are planning to compare and analyze the datasets during the daytime as well as nighttime over total cycle of the day.