• 한국공간구조학회논문집
• /
• 제7권3호
• /
• pp.125-132
• /
• 2007

본 연구의 주목적은 공간그리드의 조형요소로서 3차원 유닛의 역할과 구성을 탐구하는 것이다. 따라서 공간그리드와 3차원 유닛의 상호관계와 역할, 유닛의 유형 및 구성방식과 이에 영향을 미치는 요인들이 파악된다. 또한 각각의 형태적 특성 및 조합이 공간그리드 전체의 형상에서 드러내는 효과를 확인하여 전반적인 형태구성의 틀을 제시하고자 한다.

• Steel and Composite Structures
• /
• 제23권4호
• /
• pp.435-444
• /
• 2017

In the past, the progressive collapse resulting from local failures during accidents has caused many tragedies and loss of life. Although long-span spatial grid structures are characterised by a high degree of static indeterminacy, the sudden failure of key members may lead to a catastrophic progressive collapse. For this reason, it is especially necessary to research the progressive collapse resistance capacity of long-span spatial grid structures. This paper presents an evaluation method of important members and a novel dynamic analysis method for simulating the progressive collapse of long-span spatial grid structures. Engineering cases were analysed to validate these proposed method. These proposed methods were eventually implemented in the progressive collapse analysis of the main stadium for the Universiade Sports Center. The roof of the structure was concluded to have good resistance against progressive collapse. The novel methods provide results close to practice and are especially suitable for the progressive collapse analysis of long-span spatial grid structures.

• Computers and Concrete
• /
• 제27권5호
• /
• pp.407-416
• /
• 2021

The checking stresses in the Chinese codes for reinforced concrete (RC) or prestressed concrete (PC) bridges are aimed for the thin-web beam, which cannot reflect the actual behavior of the modern structures. The incompleteness of the checking stresses could give rise to the deficiency in the design and calculation, and unable to reveal the reason of some common cracks in the structure. In this paper, the complete stress checklist for RC or PC girder bridges are listed, as well as the corresponding crack shapes. The expression of the complete checking stresses is proposed in details. Spatial Grid Model can reflect all the concerned stresses in the structure. Through the comparison of the calculation results from the spatial grid model and the solid model, it is seen that the spatial grid model can reflect load effects such as shear lag effect, thin-wall effect and local effect. The stresses obtained from the spatial grid model could help engineers to have a good understanding of the structural behavior. Meanwhile, the stress checklist provides the information for analyzing and solving the deficiency in the structure.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.66-69
• /
• 2002

This article outlines the capabilities of a viewer component called GridViewer, and proves its reusability. GridViewer was designed for the construction of the image display part of GIS or remote sensing application software, and consequently it is particularly straightforward to closely couple GridViewer with access to very large images. Displaying is performed through pyramid structure, which enables to treat very large dataset up to several gigabytes in size under the limited capability of PC. GridViewer is free from responsibility to handle various formats of raster data files by taking grid coverage, which is designed by OGC to promote interoperability between implementations done by data vendors and software vendors providing analysis and grid processing implementations. GridViewer differs from other such viewer by allowing for clients to extend its function and capability by using small set of methods originally implemented in it. We show its reusability and expandability by applying it in developing application programs performing various functions not supported originally by the GridViewer COM component.

• 농촌계획
• /
• 제25권3호
• /
• pp.1-9
• /
• 2019

Population is important as a fundamental element of local industry and economy, and census data is essential to regional planning and policy making. Although there have been many researches on population and regional planning, there are few studies on population considering spatial unit. In this study, the population of three spatial scales were compared in order to establish the spatial unit suitable for the rural planning. The study area is Gangwon, Chungcheong-Nam, Chungcheong-Buk, Jeolla-Nam, Jeolla-Buk, Gyeonsang-Nam, Gyeonsang-Buk and Jeju province. Population were compared using statistical data analysis, GIS visualization, and spatial statistics. The mean, maximum, minimum, and variance of population were calculated and the coefficient of variation according to spatial unit was compared. The mean, maximum, minimum, and variance of population were calculated and the coefficient of variation according to spatial unit was compared. As the results, the census output area unit is difficult to interpret spatial analysis results. Administrative district unit has the limit that includes areas where the population does not live. The grid unit is well suited to the geographical characteristics but has many disadvantages of the grid with small population. Therefore, It is necessary to complement the limits of the Eup and Myeon-dong administrative district through the grid unit data.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권12호
• /
• pp.948-952
• /
• 2009

최근 공간 네트워크에서 대용량 이동객체의 위치정보를 관리하기 위한 DS-GRID(distributed S-GRID)가 제안되었다[1]. 그러나 DS-GRID는 균일 크기의 그리드 셀을 이용하기 때문에, 실제 응용에서 빈번히 발생하는 이동 객체의 쏠림 현상을 효율적으로 관리하지 못하는 단점을 지닌다. 이를 해결하기 위해, 본 논문에서는 이동객체의 밀도에 따라 그리드 셀을 동적으로 분할하는 동적 분산 그리드 기법을 제안한다. 아울러 이를 위한 k-최근접 질의처리 알고리즘을 제안한다. 마지막으로 성능 평가를 통해 이동객체의 쏠림 현상이 발생하였을 경우, 제안하는 동적 분산 그리드 기법이 검색 및 업데이트 성능 측면에서 DS-GRID 보다 우수함을 입증한다.

• Steel and Composite Structures
• /
• 제33권4호
• /
• pp.537-550
• /
• 2019

Korea and Japan have done a lot of research on composite girders with corrugated steel webs and built many bridges with corrugated steel webs due to the significant advantages of this type of bridges. Considering the demanding on the calculation method of such types of bridges and lack of relevant reinforcement design method, this paper proposes the spatial grid analysis theory and tensile stress region method. First, the accuracy and applicability of spatial grid model in analyzing composite girders with corrugated steel webs was validated by the comparison with models using shell and solid elements. Then, in a real engineering practice, the reinforcement designs from tensile stress region method based on spatial grid model, design empirical method and specification method are compared. The results show that the tensile stress region reinforcement design method can realize the inplane and out-of-plane reinforcement design in the top and bottom slabs in bridges with corrugated steel webs. The economy and precision of reinforcement design using the tensile stress region method is emphasized. Therefore, the tensile stress region reinforcement design method based on the spatial grid model can provide a new direction for the refined design of composite box girder with corrugated steel webs.

• 한국농림기상학회지
• /
• 제6권3호
• /
• pp.149-163
• /
• 2004

Evapotranspiration (ET) is a critical component of the hydrologic cycle which influences economic activities as well as the natural ecosystem. While there have been numerous studies on ET estimation for homogeneous areas using point measurements of meteorological variables, monitoring of spatial ET has not been possible at landscape - or watershed - scales. We propose a site-specific application of the land surface model, which is enabled by spatially interpolated input data at the desired resolution. Gyunggi Province of South Korea was divided into a regular grid of 10 million cells with 30m spacing and hourly temperature, humidity, wind, precipitation and solar irradiance were estimated for each grid cell by spatial interpolation of synoptic weather data. Topoclimatology models were used to accommodate effects of topography in a spatial interpolation procedure, including cold air drainage on nocturnal temperature and solar irradiance on daytime temperature. Satellite remote sensing data were used to classify the vegetation type of each grid cell, and corresponding spatial attributes including soil texture, canopy structure, and phenological features were identified. All data were fed into a standalone version of SiB2(Simple Biosphere Model 2) to simulate latent heat flux at each grid cell. A computer program was written for data management in the cell - based SiB2 operation such as extracting input data for SiB2 from grid matrices and recombining the output data back to the grid format. ET estimates at selected grid cells were validated against the actual measurement of latent heat fluxes by eddy covariance measurement. We applied this system to obtain the spatial ET of the study area on a continuous basis for the 2001-2003 period. The results showed a strong feasibility of using spatial - data driven land surface models for operational monitoring of regional ET.

• 한국공간정보시스템학회 논문지
• /
• 제10권4호
• /
• pp.11-19
• /
• 2008

최근 모바일 기기 및 무선 통신의 발달로 인하여 다양한 위치 기반 서비스에 대한 연구가 증대되고 있으며, 이러한 위치 기반 서비스의 대표적 질의인 k-최근접 질의를 효율적으로 처리하기 위한 연구가 활발히 수행되어 왔다. 기존 연구들은 질의 처리 성능의 향상을 위해, 공간 네트워크 상의 POI와 노드 사이의 거리를 미리 계산하는 pre-computation 기법을 사용한다. 그러나 이러한 pre-computation 기법들은 검색 대상이 되는 POI의 변경을 효과적으로 처리하지 못하는 단점을 갖는다. 본 논문에서는 기존 pre-computation 기법들의 단점을 극복하고, 대용량 이동객체의 위치정보를 효율적으로 관리하기 위하여 S-GRID를 이용한 분산 그리드 기법을 제안한다. 아울러 제안하는 분산 그리드 기법을 위한 k-최근접 질의 처리 알고리즘을 제시한다. 마지막으로, S-GRID 및 분산 그리드 기법의 k-최근접 질의처리 알고리즘의 성능 평가를 통해, 제안하는 기법의 우수성을 입증한다.

• Spatial Information Research
• /
• 제16권3호
• /
• pp.359-372
• /
• 2008

본 연구에서는 우리나라 소나무의 공간분포를 추정하고, 소나무 공간분포와 출현패턴을 효과적으로 설명할 수 있는 최적의 격자크기를 제안하였다. 다음으로 최적 격자크기에서 지형인자에 따른 소나무의 출현빈도를 분석하고, 지형인자가 소나무 분포에 미치는 영향력을 비교함으로써 소나무 공간분포를 지형학적으로 분석하고자 하였다. 그 결과 1m 격자크기의 DEM은 방위를 동, 서, 남, 북으로 세밀하게 구분하고 소나무도 모든 방위에 분포한 한 반면, 격자크기가 증가함에 따라 주능선에 의해 방위를 동, 서, 남 또는 동, 남과 같이 단순화시켜서 구분할 수 있었으며 소나무 또한 특정 방위에 주로 분포하는 특징을 보였다. 소나무 출현빈도 분석결과 격자크기가 100m일 때 소나무 공간분포 특징을 설명할 수 있었으며, 방위, 경사, TWI가 소나무 공간분포에 미치는 영향력 비교를 통해서는 방위의 영향력이 경사의 영향력보다 크고 경사와 TWI 사이의 영향력 차이는 크지 않은 것을 확인하였다.