• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1497-1503
• /
• 2023

To address challenges in classifying clouds and snow cover when calculating ground reflectance in Near-UltraViolet (UV) wavelengths, this study introduces a methodology that combines cloud data from the Geostationary Environmental Monitoring Spectrometer (GEMS) and the Advanced Meteorological Imager (AMI)satellites for snow cover analysis. The proposed approach aims to enhance the quality of surface reflectance calculations, and combined cloud data were generated by integrating GEMS cloud data with AMI cloud detection data. When applied to compute GEMS surface reflectance, this fusion approach significantly mitigated underestimation issues compared to using only GEMS cloud data in snow-covered regions, resulting in an approximately 17% improvement across the entire observational area. The findings of this study highlight the potential to address persistent underestimation challenges in snow areas by employing fused cloud data, consequently enhancing the accuracy of other Level-2 products based on improved surface reflectivity.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.361-364
• /
• 2008

It is well known that combining spatial and spectral information can improve land use classification from satellite imagery. High spatial resolution classification has a limitation when only using the spectral information due to the complex spatial arrangement of features and spectral heterogeneity within each class. Therefore, extracting the spatial information is one of the most important steps in high resolution satellite image classification. In this paper, we propose a new spatial feature extraction method. The extracted features are integrated with spectral bands to improve overall classification accuracy. The classification is achieved by applying a Support Vector Machines classifier. In order to evaluate the proposed feature extraction method, we applied our approach to KOMPSAT-2 data and compared the result with the other methods.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.218-224
• /
• 1998

The coefficients of variation obtained from three typical vegetation indices of eight levels of multi-spatial resolution images in urban areas were employed to identify the optimum spatial resolution in terms of maintaining information quality. These multi-spatial resolution images were prepared by degrading 1 meter simulated, 16 meter ADEOS/AVNIR, and 30 meter Landsat-TM images. Normalized Difference Vegetation Index (NDVI), Perpendicular Vegetation Index (PVI) and Soil Adjusted Ratio Vegetation Index (SARVI) were applied to reduce data redundancy and compare the characteristics of multi-spatial resolution image of vegetation indices. The threshold point on the curve of the coefficient of variation was defined as the optimum resolution level for the analysis with multi-spatial resolution image sets. Also, the results from the image segmentation approach of region growing to extract man-made features were compared with these multi-spatial resolution image sets.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.317-326
• /
• 2019

Development projects and related environmental impacts take place in space. Therefore, it is important to use spatial information in the environmental impact assessment process. This study proposes to construct spatial information produced by various organizations as an inventory and suggests it to be utilized in environmental impact assessment process. For this purpose, investigate the use of spatial information in the environmental impact assessment process and list of environmental space information provided by public information systems. and applied the methodology derived from previous studies to build an inventory of spatial information using environmental impact assessment. The spatial information utilized in the environmental impact assessment work was 64 items. Based on the data availability, linkage and renewability, the spatial information of the Environment that can be used for the environmental impact assessment was 45 items. Finally 49 items, including 19 new items were presented as an inventory, contributing to the performance of environmental impact assessment based on spatial information.

• Water Engineering Research
• /
• v.5 no.3
• /
• pp.123-131
• /
• 2004

This paper describes the use of spatial interpolation for estimating seasonal crop potential evapotranspiration (PET) and irrigation water requirement in unmeasured evaporation gage stations within Edwards Aquifer, Texas using GIS. The Edwards Aquifer area has insufficient data with short observed records and rare gage stations, then, the investigation of data for determining of irrigation water requirement is difficult. This research shows that spatial interpolation techniques can be used for creating more accurate PET data in unmeasured region, because PET data are important parameter to estimate irrigation water requirement. Recently, many researchers are investigating intensively these techniques based upon mathematical and statistical theories. Especially, three techniques have well been used: Inverse Distance Weighting (IDW), spline, and kriging (simple, ordinary and universal). In conclusion, the result of this study (Table 1) shows the kriging interpolation technique is found to be the best method for prediction of unmeasured PET in Edwards aquifer, Texas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.253-253
• /
• 2015

This research evaluated the effect of two main sources on the results of the ocean regional circulation model (ORCMs) during downscaling and nesting the results from the coarse data. The two sources should be the domain size, and temporal and spatial resolution different between driving and driven data. The Big-Brother Experiment is applied to examine the impact of them on the results of the ORCMs separately. Within resolution of 3km grid point ORCMs applying in the Big-Brother Experiment framework, it showed that the simulation results of the ORCMs depend on the domain size and specially the spatial and temporal resolution of lateral boundary conditions (LBCs). The domain size can be selected at 9.5 times larger than the interest area, and the spatial resolution between driving data and driven model can be up to 3 of ratio resolution and updating frequency of the LBCs can be up to every 6 hours per day.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.397-408
• /
• 2013

The purpose of this study is to analyze water cycle area ratio and spatial evaluation of water cycle in urban area of Changwon-si, Gyeongsangnam-do. Water cycle area ratio are analyzed by using spatial data of land-cover and land-use, and Hot spot analysis of GIS program was used for spatial evaluation of water cycle. The results are as below. Firstly, the high water cycle area ratio areas were forests, parks, and rivers, but urban areas covered asphalt and concrete were low under 40%. Public institutions and co-residential of urban areas were higher than others because of high area ratio of pervious land-cover. Spatial evaluation of water cycle was analyzed to vulnerable areas there are dense residential and commercial area. These areas are really occurring frequently flooding and immersion, therefore, is required water management facilities and improvement of land-cover from impervious to pervious. In the future, it will require additionally analysis of water cycle area ratio supplemented data of water management facility and ground water.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.587-607
• /
• 2020

Soil moisture is essential information for meteorological and hydrological analyses. To date, many efforts have been made to achieve the two goals for soil moisture data, i.e., the improvement of accuracy and resolution, which is very challenging. We presented an ensemble downscaling method for quality improvement of gridded soil moisture data in terms of the accuracy and the spatial resolution by the integration of BMA (Bayesian model averaging) and ATPRK (area-to-point regression kriging). In the experiments, the BMA ensemble showed a 22% better accuracy than the data sets from ESA CCI (European Space Agency-Climate Change Initiative), ERA5 (ECMWF Reanalysis 5), and GLDAS (Global Land Data Assimilation System) in terms of RMSE (root mean square error). Also, the ATPRK downscaling could enhance the spatial resolution from 0.25° to 0.05° while preserving the improved accuracy and the spatial pattern of the BMA ensemble, without under- or over-estimation. The quality-improved data sets can contribute to a variety of local and regional applications related to soil moisture, such as agriculture, forest, hydrology, and meteorology. Because the ensemble downscaling method can be applied to the other land surface variables such as temperature, humidity, precipitation, and evapotranspiration, it can be a viable option to complement the accuracy and the spatial resolution of satellite images and numerical models.

• Korean Journal of Remote Sensing
• /
• v.19 no.3
• /
• pp.233-246
• /
• 2003

This paper presents a methodology to account for the partial or gradual changes of environmental phenomena in categorical map information for the fusion/integration of multiple spatial data. The fuzzy set based spatial data fusion scheme is applied in order to account for the fuzziness of boundaries in categorical information showing the partial or gradual environmental impacts. The fuzziness or uncertainty of boundary is represented as two kinds of fuzzy membership functions based on fuzzy object concept and the effects of them are quantitatively evaluated with the help of a cross validation procedure. A case study for landslide hazard assessment demonstrates the better performance of this scheme as compared to traditional crisp boundary representation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.25-33
• /
• 2016

In order to visualize point based Location-Based Social Network Services(LBSNS) data on multi-scaled tile map effectively, it is necessary to apply tile-based clustering method. Then determinating reasonable numbers and size of tiles is required. However, there is no such criteria and the numbers and size of tiles are modified based on data type and the purpose of analysis. In other words, researchers' subjectivity is always involved in this type of study. This is when Modifiable Areal Unit Problem(MAUP) occurs, that affects the results of analysis. Among LBSNS, geotagged Twitter data were chosen to find the influence of MAUP in scale effects perspective. For this purpose, the degree of spatial autocorrelation using spatial error model was altered, and change of distributions was analyzed using Morna's I. As a result, positive spatial autocorrelation showed in the original data and the spatial autocorrelation was decreased as the value of spatial autoregressive coefficient was increasing. Therefore, the intensity of the spatial autocorrelation of Twitter data was adjusted to five levels, and for each level, nine different size of grid was created. For each level and different grid sizes, Moran's I was calculated. It was found that the spatial autocorrelation was increased when the aggregation level was being increased and decreased in a certainpoint. Another tendency was found that the scale effect of MAUP was decreased when the spatial autocorrelation was high.