• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.121-135
• /
• 2018

The ministry of land, Infrastructure and transport has revised the "National Land Planning and Utilization Act" in 2012. As a result, the regulation of floor area ratio for land covering two or more zoning area has been changed. This study conducted an analysis of the policy effects of changes in the criteria for the application of the floor area ratio by revising the "National Land Planning and Utilization Act". Land covering two or more zoning area means a street side commercial area and street side residential area that is generally understood. This study analyzed the policy effects in Gangnam-gu which has relatively large areas of street side commercial area and street side residential area. The 468 office building transaction cases were analyzed in Gangnam-gu from 2007 to 2017. The result shows that the office building, which has received incentive for policy changes, reported a 19.08% rise in price compared to the one that did not. It means that the economic effects of change of application standard were significant. The existing policy also served as a restriction on land use by landowners, which in turn contributed to the devaluation of the asset's intrinsic value. Therefore, this study may have contributed to the rational use of land and to provide an empirical basis for the change in policy to be assessed for its intrinsic value.

• Korean Institute of Interior Design Journal
• /
• v.25 no.5
• /
• pp.140-147
• /
• 2016

This research aims to establish the size standard of university library's user space, and present the standard and method to calculate total area required in the planning of new building construction and remodeling. Nine university libraries newly constructed or remodeled since 2000 were selected among the libraries of large scale universities with more than 10,000 enrolled students as the target libraries in this research. The target libraries were classified into A group (five cases partially remodeled) and B group (four cases newly constructed or fully remodeled) on the basis of the change of times. A university library can be divided into three spaces (user space, administration space and public space). This research classified the reading room in the user space into bookshelf zone, reading zone, information/office zone and hall/other zone, and analyzed area ratio according to each zone. B group's bookshelf zone decreased 12% more than A group, and B group's reading zone increased 10% more than A group. However, there was no big change in the area ratio of information/office zone and hall/other zone. This can be interpreted that university library changes from book and archive preservation-oriented space to user-oriented space. This research presented a proper reading room area calculation method, based on the capacity of books, by reflecting such a change. Each zone's standard was set up through classification of domestic and international standards, based on which, the calculation method of university library's total floor area required was presented. The reason why there was difference in university library's total floor area required according to domestic standard and international standard was that the number of enrolled students per seat in the reading room was different. The area calculation methods presented in this research can be utilized as useful data upon planning university library construction or remodeling.

• 한국생태학회:학술대회논문집
• /
• 2002.08a
• /
• pp.71-77
• /
• 2002

For landscape ecological management of the isolated forestlands in Incheon city located in the western tip of South Korea, the forest vegetation of Mt. Cheolma was classified phytosciologically and mapped out its spatial distribution at a scale of 1:5,000. Characteristics of forest landscape structures were discussed in terms of the number and size of patches obtained by analyzing vegetation map. Units to manage the forest vegetation were categorized into eighteen communities, seventeen groups, and sixteen subgroups. Landscape elements were classified into five types: secondary vegetation, introduced vegetation for forestry (IVF), introduced vegetation for agriculture (IVA), and other elements. Two hundred and ninety-three forest landscape patches covers 443.3ha of which IVF accounted for 316.8ha(71.5%), the largest portion, secondary vegetation for f01.2ha(22.8%), IVA for 6.2ha(1.4%), and others for 19.1ha(4.3%). The ratio of natural forest elements of 31.9% showed that this area was mainly comprised of artificially introduced vegetation, such as Robinia pseudoacacia plantation and Pinus rigida plantation. Forest landscape patches have a mean area of 4.5ha, a density of 66.1/100ha, and a diversity index of 0.87. It was estimated that differentiation of patches recognized in community level would be related to human interference and those in subordinate level to natural processes.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.4
• /
• pp.47-56
• /
• 2012

This paper describes the structural design and optimization of sinusoidally corrugated web girder by using EUROCODE (EN 1993-1-5). The optimum design methodology and characteristics of the optimal cross-section are discussed. We investigate a shear buckling and the concerned standards for corrugated web and explain the equations to obtain a critical stress according to buckling type. In order to perform optimization, we consider an objective function as minimum weight of the girder and use the constraint functions as slenderness ratio and stresses of flanges as well as corrugated web and deflection. Genetic Algorithm is adopted to search a global optimum solution for this mathematical model. For numerical example, the clamped girder under the concentrated load is considered, while the optimum cross-sectional area and design variables are analyzed. From the results of the adopted example, the optimum design program of the sinusoidally corrugated web girder is able to find the suitable solution which satisfied a condition subject to constraint functions. The optimum design shows the tendency to decrease the cross-sectional area with the yielding strength increase and increase the areas with load increase. Moreover, the corrugated web thickness shows a stable increase concerning the load.

• The Korean Journal of Ecology
• /
• v.25 no.4
• /
• pp.205-211
• /
• 2002

For landscape ecological management of the isolated forestlands in Incheon city located in the western tip of South Korea, the forest vegetation of Mt. Cheolma was classified phytosciologically and mapped out its spatial distribution at a scale of 1:5,000. Characteristics of forest landscape structures were discussed in terms of the number and size of patches obtained by analy zing vegetation map. Units to manage the forest vegetation were categorized into eighteen communities, seventeen groups, and sixteen subgroups. Landscape elements were classified into five types: secondary vegetation, introduced vegetation for forestry (IVF), introduced vegetation for agriculture (IVA), and other elements. Two hundred and ninety-three forest landscape patches covers 443.3ha, of which IVF accounted for 316.8ha(71.5$\%$), the largest portion, secondary vegetation for 101.2ha(22.8$\%$), IVA for 6.2ha(1.4$\%$), and others for 19.1ha(4.3$\%$). The ratio of natural forest elements of 31.9$\%$ showed that this area was mainly comprised of artificially introduced vegetation, such as Robinia pseudoacacia plantation and Pinus rigida plantation. Forest landscape patches have a mean area of 4.5ha, a density of 66.1/100ha, and a diversity index of 0.87. It was estimated that differentiation of patches recognized in community level would be related to human interference and those in subordinate level to natural processes.

• International Journal of High-Rise Buildings
• /
• v.12 no.1
• /
• pp.19-33
• /
• 2023

Air Rights techniques, including floor-area ratio (FAR) transfers, FAR bonuses, and FAR storage, have been widely applied among skyscraper constructions in New York City for profit maximization goals. Since 1916, air rights regulations in New York zoning system have been revised and improved over the years to cater the urban development needs of different periods, and they also result in typical skyscraper block typologies. This research firstly performed spatial overlay analysis to reveal the spatial correlation between skyscraper blocks and air rights application blocks; secondly, Spacematrix parameters and cluster analysis are applied to divide the skyscraper urban block of New York City into four categories. Compared with air rights application data, the research attempts to illustrate how various air rights techniques have acted on the formation and evolution of skyscraper block typologies in the pre-1916, 1916-1961, 1961-2010, and 2010-present periods respectively, in order to reveal the relationship between public policies and urban morphology in a broader sense and also provide references for policy making in future.

• Journal of the Korean Geographical Society
• /
• v.36 no.2
• /
• pp.126-140
• /
• 2001

The influence of small urban parks(green ratio is 100%) on the temperature pattern over the urban and its surrounding area was examined by analyzing the case of in and around Changkyeong palace, Changdeok plalace and Jongmyo, Jongro-gu, Seoul. The pattern of temperature over urban parks and their surrounding built-up area was analyzed from September to November 2000, measuring maximum and minimum temperatures with fixed sensors(maximum and minimum thermometer)and real-time temperature depends largely on both the land-use type and the distance from the park border. In the case of maximum temperature, the lowest value appeared on the green area within parks and the highest value on the built-up area far from the green area. The maximum temperature difference between parks and built-up areas was up to $7.3^{\circ}C$. In the built-up area, the maximum temperature of commercial areas was higher than residential areas. In the night time, not only land-use type but also topography is important for the spatial distributlon of temperature because of the cold airflow from adjacet hills. The horizontal temperature profile by mobile measurement is also related to land-use type and to the distance from the park borders. There is a magnitude of $1^{\circ}C$ temperture difference over a distance of 200m and $3~4^{\circ}C$ over a distance of 400m from the park borders.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.2
• /
• pp.42-54
• /
• 2023

The population is concentrated in the metropolitan areas in Korea, and low-density residential areas are transforming into high density residential areas through redevelopment to meet this demand. However, large-scale redevelopment in a short period of time has a negative impact on the urban climate, such as generating a heat island effect due to the reduction of urban green areas. In this study, the change in surface temperature from 2013 to 2022 in the redevelpment areas of Godeok-dong and Dunchon-dong, Gangdong-gu, Seoul, was analyzed using Landsat 8 satellite images. In the Godeok-dong area, the difference in surface temperature was analyzed for the target redevelopment area, forest area, mixed forest and urban area, and low density residential area. In the Dunchon-dong area, the difference in surface temperature was analyzed for the target redevelopment area, forest area, and low density residential area. The difference in surface temperature was analyzed through multiple regression analysis conducted yearly over the three different stages in redevelopment period. The results from the multiple regression analysis show that in both areas, the land surface temperature of target redevelopment area was higher than that of the forest area and lower than low density residential area. It can be seen that these results occurred because the low-density residential area in Godeok-dong and Dunchon-dong had a lower green area ratio and a higher building-to-land ratio than the target redevelopment area. The results of this study suggest that even if low-density residential areas are transforming into high-density areas, adjusting the management of green areas and building-to-land ratio can contribute to lessen urban heat island effect.

• Journal of the Korean Geographical Society
• /
• v.40 no.3 s.108
• /
• pp.296-309
• /
• 2005

In this study, we investigated the change of future land-surface and relationships of land-surface change with geo-spatial information, using a Bayesian prediction model based on a likelihood ratio function, for analysing the land-surface change of the Gongju area. We classified the land-surface satellite images, and then extracted the changing area using a way of post classification comparison. land-surface information related to the land-surface change is constructed in a GIS environment, and the map of land-surface change prediction is made using the likelihood ratio function. As the results of this study, the thematic maps which definitely influence land-surface change of rural or urban areas are elevation, water system, population density, roads, population moving, the number of establishments, land price, etc. Also, thematic maps which definitely influence the land-surface change of forests areas are elevation, slope, population density, population moving, land price, etc. As a result of land-surface change analysis, center proliferation of old and new downtown is composed near Gum-river, and the downtown area will spread around the local roads and interchange areas in the urban area. In case of agricultural areas, a small tributary of Gum-river or an area of local roads which are attached with adjacent areas showed the high probability of change. Most of the forest areas are located in southeast and from this result we can guess why the wide chestnut-tree cultivation complex is located in these areas and the capability of forest damage is very high. As a result of validation using a prediction rate curve, a capability of prediction of urban area is $80\%$, agriculture area is $55\%$, forest area is $40\%$ in higher $10\%$ of possibility which the land-surface change would occur. This integration model is unsatisfactory to Predict the forest area in the study area and thus as a future work, it is necessary to apply new thematic maps or prediction models In conclusion, we can expect that this way can be one of the most essential land-surface change studies in a few years.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.5
• /
• pp.59-65
• /
• 2008

Recently, to improve the load carrying capacity of column structures such as bridge piers, application to concrete-filled steel tube(CFT) type columns are increased more and more. To design the concrete-filled steel tube(CFT) columns in accuracy, influence of material and geometry properties and aspect ratio on ultimate strength of the concrete-filled steel tube column is investigated by experimental researches. In this investigation, the ultimate strength distribution of the concrete-filled steel tube column in accordance with diameter-thickness ratio(D/t) and steel-concrete area ratio(As/Ac) are clarified by the compressive tests. Futhermore, parametric experimental investigation on concrete target strength is performed. It was known from experimental observation that ultimate strength of concrete-filled steel tube column under axial compressive loading more depends on section properties of steel tube rather than concrete strength.