• 한국항행학회논문지
• /
• 제21권2호
• /
• pp.187-192
• /
• 2017

단일 모드 광섬유 (SMF; single mode fiber)의 길이와 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 랜덤하게 분포하는 광 위상 공액과 결합된 분산 제어 (DM; dispersion management)가 적용된 장거리 (50 fiber spans ${\times}80km$) 전송 링크에서 SMF와 분산 보상 광섬유 (DCF; dispersion compensating fiber) 배열과 전체 잉여 분산 (NRD; net residual dispersion)을 조절하는 위치에 따른 왜곡된 WDM 채널의 보상 특성을 수치적으로 분석해 보았다. NRD 조절 위치는 중계 구간을 구성하는 SMF와 DCF의 배열과 관계되어 있지만, NRD 조절의 구체적 위치보다 중계 구간을 이루는 SMF와 DCF의 배열이 WDM 채널의 수신 성능에 영향을 미치는 것을 확인하였다.

• Membrane and Water Treatment
• /
• 제4권1호
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• 한국항행학회논문지
• /
• 제19권4호
• /
• pp.323-329
• /
• 2015

장거리 ($50\;fiber\;spans{\times}80km$) 전송 링크의 융통적 구성을 위해 단일 모드 광섬유 (SMF; single mode fiber)의 길이와 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)이 랜덤하게 분포하는 링크에서 광 위상 공액과 결합된 분산 제어 (DM; dispersion management)를 통한 왜곡된 WDM 채널의 보상 특성을 살펴보았다. WDM 채널들의 입사 전력이 0 dBm 이하로 제한된다면 SMF 길이와 RDPS가 랜덤하게 분포하는 링크를 통한 보상 효과가 균일하게 분포하는 링크에서의 보상 효과와 유사하게 나타나는 것을 확인하였다. 이는 제안한 랜덤 분포 링크 구조를 이용하면 장거리 WDM 전송 링크 설계와 구축에서 융통성을 확보할 수 있다는 것을 의미한다.

• 원예과학기술지
• /
• 제35권1호
• /
• pp.21-29
• /
• 2017

This study was conducted to determine the effects of artificial lighting sources on vegetative growth of Phalaenopsis and Doritaenopsis (an intergeneric hybrid of Doritis and Phalaenopsis) orchids. One - month - old plants were cultivated under fluorescent lamps, cool - white light - emitting diodes (LEDs), or warm - white LEDs at 80 and $160{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The blue (400 - 500 nm) : green (500 - 600 nm) : red (600 - 700 nm) : far - red (700 - 800 nm) ratios of the fluorescent lamps, cool-white LEDs, and warm-white LEDs were 1 : 1.3 : 0.8 : 0.1, 1 : 1.3 : 0.6 : 0.1, and 1 : 2.7 : 2.3 : 0.4, respectively. Each light treatment was maintained for 16 weeks in a closed plant-production system maintained at $28^{\circ}C$ with a 12 h photoperiod. The longest leaf span, as well as the leaf length and width of the uppermost mature leaf, were observed in plants treated with warm-white LEDs. Plants grown under fluorescent lamps had longer and wider leaves with a greater leaf span than plants grown under cool-white LEDs, while the maximum quantum efficiency of photosystem II was higher under cool-white LEDs. The vegetative responses affected by different lighting sources were similar at both 80 and $160{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Leaf span and root biomass were increased by the higher light intensity in both cultivars, while the relative chlorophyll content was decreased. These results indicate that relatively high intensity light can promote vegetative growth of young Phalaenopsis plants, and that warm - white LEDs, which contain a high red-light ratio, are a better lighting source for the growth of these plants than the cool-white LEDs or fluorescent lamps. These results could therefore be useful in the selection of artificial lighting to maximize vegetative growth of Phalaenopsis plants in a closed plant - production system.

• 한국의류학회지
• /
• 제31권3호
• /
• pp.433-439
• /
• 2007

The effects of nonionic surfactants on detergency and water wetting/retention properties of soiled cotton cloths were reported. Two different soiled cloths were used. soiled cotton cloth 1 was made in the lab. with carbon black, tripalmitin, n-dodecane & palmitic acid on Korea Apparel Testing & Research Institute(KATRI) cotton testcloth and soiled cotton cloth 2(EMPA 101) was purchased from Testfabrics, Inc., USA. The following nonionic surfactants; l.e., Span 20, Tween 20, 40, 60, 80, 21, 61, 81, 65, & 85, were used in the study. The water retention ratio(W/H) values of soiled cotton cloths were decreased, whereas the water contact angle values of soiled cloth were not changed markedly compared with those of unsoiled testcloths. The wetting and water retention of soiled cotton cloth 1 was improved with addition of nonoinic surfactants. The surfactants which have more hydrophilic characterictics or unsaturated hydrophobe tails were effective in improving wetting and water retention properties of soiled cotton cloth 1. The water contact angle values of soiled cotton cloths were extremely low with Span 20, presumably due to the high adsorption density or the surfactant. The detergency of soiled cloths were low in Span 20 and high in Tween 20, 40, 60 & 80 0.1g/dl surfactant solutions. Nonionic surfactants having higher ethylene oxide contents resulted in better detergency. In the range studied, the wetting and water retention of soiled cotton cloths did not show any particular relation to the detergency, whereas the surfactant characteristics, especially HLB values, influenced the detergency of soiled cotton cloths.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2002년도 추계학술발표논문집
• /
• pp.74-80
• /
• 2002

A mathematical tension model for a moving web in a multi-span web handling system was derived and validated by using a simulator which includes unwinder, driven roller, winder, load cells, controllers, etc. A tension controller was designed to compensate tension disturbances generated by velocity changes of the unwinder and driven roller. From experimental results it was proved that the tension model properly expressed the tension behavior of a moving web for specific conditions. The distributed tension controller designed by using the pole-placement technique compensated the tension disturbances transfered from upsteram tension variation. Interactions between web spans including "tension transfer phenomenon" were clearly confirmed through the study. A mathematical model of lateral motion of a moving web was verified also by using the same experimental apparatus which includes displacement type guidance systems. And a feedforward control strategy was designed for more accurate control of the lateral motion of a moving web, which utilize a measured signal of the lateral displacement of web in a previous span and a more correctly identified mathematical model to estimate the disturbance of lateral motion from the previous span. This approach was turned out to be effective in improving the performance of the guidance system for more wide range disturbances.

• 한국식품조리과학회지
• /
• 제12권1호
• /
• pp.92-98
• /
• 1996

쌀가루(200 mesh)로 만든 슈의 품질을 향상시키기 위하여 가장 효과적인 첨가물의 종류와 첨가비율을 구명하고져 본 실험을 수행하였다. 첨가물로는 lecithin, span 20, span 40, span 80 등의 유화제와, gelatin, arabic pm, methylcellulose, CMC 등의 점증제를 사용하였다. 1. 쌀가루만으로도 슈형성은 가능하였다. 2. 그러나, 유화제를 첨가하면 쌀가루만의 무첨가구 보다 관능평가에서는 유의차가 없었지만 팽화력이 우수하였다. 3. 점증제로는 큰 효과가 없었으며, 오히려 다량첨가시에는 반죽의 경도가 커져서 슈내부에 공동이 형성되지 않았다. 4. 두가지의 유화제나 점증제와의 복합사용은 유화제 단독 사용시보다 효과가 없었다. 5. Lecithin을 0.6%로 첨가할 경우, 슈의 품질이 가장 우수하였다.

• Agricultural and Biosystems Engineering
• /
• 제1권2호
• /
• pp.73-80
• /
• 2000

Aerodynamics in a naturally ventilated multi-span greenhouse with plants was analyzed numerically by the computational fluid dynamics (CFD) simulation. To investigate the potential application of CFD techniques to greenhouse design and analysis, the numerical results of the CFD model were compared with the results of a steady-state mass and energy balance numerical model. Assuming the results of the mass and energy balance model as the standard, reasonably good agreement was obtained between the natural ventilation rates computed by the CFD numerical model and the mass and energy balance model. The steady-state CFD model during a sunny day showed negative errors as high as 15% in the morning and comparable positive errors in the afternoon. Such errors assumed to be due to heat storage in the floor, benches, and greenhouse structure. For a west wind of 2.5 m s$^{-1}$ , the internal nonporous shading screens that opened to the east were predicted to have a 15.6% better air exchange rate than opened to the west. It was generally predicted that the presence of nonporous internal shading screens significantly reduced natural ventilation if the horizontal opening of the screen for each span was smaller that the effective roof vent opening.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.80-87
• /
• 2005

A set of experiments was carried out for obtaining the velocity field around the hydrofoil of finite span, using a wing of the NACA 0012 section in a circulating water channel. DPIV technique was used to measure the velocity field, and the velocity measurements along the span were done for 3 speeds, 3 submerged depths, and 4 angles of attack. Experimental data are compared with the theoretical assumptions, as well as the numerical findings by Lee and Lee(2004). Special care is given to the flow near the tips and in the region close to the leading edge. Though indirect, using the measured data of the velocity, it is now possible to compare the aerodynamic and the hydrodynamic strength of the circulation distribution of a wing in the framework of the lifting-line theory.

• 콘크리트학회지
• /
• 제2권3호
• /
• pp.73-80
• /
• 1990

본 연수는 철근콘크리트 슬래브에서, 슬래브의 접선방향으로 작용하는 면내인장력이 슬래브의 펀칭거동에 미치는 영향을 연구하고자 하는 것이다. 주요변수들은 슬래브으 전단지간(shear span)과 면내인장력의 크기이다. 본 연구에서 얻어진 결과들을 이미 발표된 논문들의 결과와 비교하고, 또 현행의 설계규준인 ACI 349-85의 해당규준의 타당성을 검토하여 새로운 식을 제안했다.