• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.75-80
• /
• 1992

The electrochemical spectral sensitization of a $SnO_2$ electrode with eosin B, a Xanthene dye, has been studied in acetonitrile. Measurements of the photocurrent have been carried out in the presence of supersensitizers such as thiourea, 1-allyl-2-thiourea, NaSCN, and NaI. The magnitude of the supersensitized photocurrent was greater than that of the sensitized photocurrent for all of the supersensitizers studied. However, the long time span of irradiation causes a significant decrease of the supersensitized photocurrent as well as the absorbance. These results, together with infrared spectra and fluorescence spectra, are taken into account to elucidate the mechanism of photoreaction between eosin B and supersensitizers in acetonitrile.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.4
• /
• pp.323-327
• /
• 1999

To protect ${\beta}-carotene$ at the stomach and to release rapidly at the intestine we prepared alginate beads containing ${\beta}-carotene$. ${\beta}-carotene$ and alginate solution was homogenized and prepared o/w emulsion was prepared. It was poured into $Ca^{2+}$ solution through syringe needle. The gel was formed spontaneously and alginate beads containing ${\beta}-carotene$ were prepared. ${\beta}-Carotene$ was incorporated into the beads more than 95%. The release rate of ${\beta}-carotene$ was dependent on the concentration of $Ca^{2+}$, ${\beta}-carotene$ and surfactants. However, the concentration of alginate did not affect the release rate of ${\beta}-carotene$. The high concentration of $Ca^{2+}$ slowed down the release rate of ${\beta}-carotene$. The addition of surfactants in the ${\beta}-carotene$beads increased the release rate of ${\beta}-carotene$ in the order of Tween 80 > Cremophor > Span 20. The contents of ${\beta}-carotene$ and diameter of ${\beta}-carotene$ beads did not change significantly at $50^{\circ}C$ for 20 days.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.57-58
• /
• 2015

In this study, we present geometrical and kinematical analysis of Moreton wave observed in 2012 June 3rd and July 6th, recorded in H-${\alpha}$ images of Global Oscillation Network Group (GONG) archive. These large-scale waves exhibit different features compared to each other. The observed wave of June 3rd has angular span of about $70^{\circ}$ with a diffuse wave front associated to NOAA active region 11496. It was found that the propagating speed of the wave at 17:53 UT is about $931{\pm}80km/s$. The broadness nature of this Moreton wave can be interpreted as the vertical extension of the wave over the chromosphere. On the other hand, the wave of July 6th associated with X1.1 class are that occurred at 23:01 UT in AR NOAA11515. From the kinematical analysis, the wave propagated with the initial velocity of about $994{\pm}70km/s$ which is in agreement with the speed of coronal shock derived from type II radio burst, v ~ 1100 km/s. These two identified waves add the inventory of the large-scale waves observed in 24th Solar Cycle.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.28.2-28.2
• /
• 2011

To search for and study the nature of the long-periodic variations of massive stars, we have been carrying out a precise radial velocity (RV) survey for supergiants. Here, we present high-resolution RV measurements of ${\alpha}$ Per which lies near the Cepheid instability strip from November 2005 to February 2011 using the fiber-fed Bohyunsan Observatory Echelle Spectrograph (BOES) at Bohyunsan Optical Astronomy Observatory (BOAO). The orbital solution yields a period of 129 days, a 2K amplitude of 80 m/s, and an eccentricity of 0.1. Assuming a possible stellar mass of 7.3 $M{\bigodot}$, we estimate the minimum mass for the planetary companion to be 7.5 MJup with the orbital semi-major axis of 0.97 AU. We do not find the correlation between RV variations and chromospheric activity indicator (Ca II H & K region). The Hipparcos photometry and bisector velocity span (BVS) do not show any obvious correlations with RV variations. These analyses suggest that ${\alpha}$ Per is a pulsating supergiant that hosts an exoplanet. If the 129 days variations of ${\alpha}$ Per do not come from an exoplanet but Cepheid-like pulsations, the theoretical boundary of the Cepheid instability strip may need to be extended to the bluer side.

• Journal of the Korean Society of Combustion
• /
• v.21 no.2
• /
• pp.7-14
• /
• 2016

Evaporation and combustion characteristics of fuel droplet with carbon nanoparticle were investigated in a rapid compression machine(RCM). RCM is an experimental equipment to simulate one compression stroke of reciprocating engine. Nitrogen was charged into reaction chamber for evaporation experiment, while oxygen was charged for combustion experiment. N990 carbon black and n-heptane were used to synthesize the carbon nanofluids. Surfactant, span80, was used to make synthesis easier. The droplet pictures were taken using a high speed camera with 500 frames per second. Thermocouple, of which tip is $50{\mu}m$, was used not only to measure transient bulk temperature, but also to suspend the droplet. Reaction chamber temperature was calculated from pressure data. The evaporation rate of nanofluids was improved compared to pure fuel. The ignition delay was promoted due to the nanoparticle, but the burning rate was decreased.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.207-212
• /
• 1996

We developed pneumatic blood pump and its driving system as a pediatric ventricular assist device. The blood pump is diaphragm type system and its blood contacting area is coated with Bio-Span. The driving unit Is consists of dual pumps, valves for the reliable blood pumping and its controller uses 80C196(Intel) as a main processor. The acute animal experiment was performed with dogs and its body weight is about 20 kg. The maximum cardiac output is about 2.1 l/min and the pressure and flow curves showed reliable operation as assist device.

• Membrane and Water Treatment
• /
• v.6 no.4
• /
• pp.277-292
• /
• 2015

The extraction of lactic acid by an emulsion liquid membrane (ELM), in batch and continuous mode, has been reported. On the basis of preliminary experiments, the optimum composition of the organic phase (membrane) is determined. When the SPan 80 is used as surfactant, the emulsion breakage exceeds 50%, but only 10% is obtained when the ECA4360 is used. The effects of surfactant, carrier and solute concentrations, phase volume ratio, and stirring speed on the extraction yield were examined and optimized. Surfactant, carrier and diluent used were ECA4360, trilaurylamine (TLA) and dodecane, respectively; 2-ethylhexane-1,3-diol (EHD) is used as a co-surfactant. Under optimal conditions, emulsion breaking is very low and the swelling is kept at its lowest level. Under the pH conditions of fermentation medium, the extraction yield is lower. A mixer-settler continuous system was used for testing these conditions. The residence time, the number of extraction stages and the stability of the emulsion were studied and optimized. The extraction yield obtained exceeds 90%.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.373-379
• /
• 2019

One of the real issues of the recent years is water contamination because of harmful synthetic dyes. Liquid Membranes (LM) resemble a promising alternative to the current separation processes, demonstrating various points of interest as far as effectiveness, selectivity, and operational expenses. The improvement of various Liquid Membranes designs has been a matter of examination by few researchers, particularly for the expulsion of dyes from aqueous solutions. The choice of organic surfactants plays an essential role in the efficiency of the dye removal. In LM design, the most significant step towards productivity is the decision of the surfactant type and its concentration. Liquid emulsion membrane (LEM) was used to remove safranin from aqueous solutions in which the emulsion was made with the help of D2EHPA as carrier, kerosene was used as a diluent and Span 80 (Sorbiton monooleate) was used as an emulsifying agent or surfactant. Various sorts of internal stages were utilized, to be specific sulphuric acid and sodium hydroxide. The impact of parameters influencing extraction efficiency such as pH of feed solution, concentrations of surfactant and emulsifying agent in membrane phase, volume ratio of internal phase to membrane phase, internal phase concentration, agitation speed and time of extraction were analyzed.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.361-372
• /
• 2019

Effect of different alkane based solvents on the stability of emulsion liquid membrane was investigated using normal alkanes (n-hexane, n-heptane, n-octane and n-decane) under various operating parameters of surfactant concentration, emulsification time, internal phase concentration, volume ratio of internal phase to organic phase, volume ratio of emulsion phase to external phase and stirring speed. Results of stability revealed that emulsion liquid membrane containing n-octane as solvent and span-80 (5 % (w/w)) as emulsifying agent presented the highest amount of emulsion stability (the lowest breakage) compared with other solvents; however, operating parameters (surfactant concentration (5% (w/w)), emulsification time (6 min), internal phase concentration (0.05 M), volume ratio of internal phase to organic phase (1/1), volume ratio of emulsion phase to external phase (1/5) and stirring speed (300 rpm)) were also influential on improving the stability (about 0.2% breakage) and on achieving the most stable emulsion. The membrane with the highest stability was employed to extract acridine orange with various concentrations (10, 20 and 40 ppm) from water. The emulsion liquid membrane prepared with n-octane as the best solvent almost removed 99.5% of acridine orange from water. Also, the prepared liquid membrane eliminated completely (100%) other cationic dyes (methylene blue, methyl violet and crystal violet) from water demonstrating the efficacy of prepared emulsion liquid membrane in treatment of dye polluted waters.

• Annual Conference on Human and Language Technology
• /
• 2023.10a
• /
• pp.80-85
• /
• 2023

기계 번역에서 품질 검증은 정답 문장 없이 기계 번역 시스템에서 생성된 번역의 품질을 자동으로 추정하는 것을 목표로 한다. 일반적으로 이 작업은 상용화된 기계 번역 시스템에서 후처리 모듈 역할을 하여 사용자에게 잠재적인 번역 오류를 경고한다. 품질 검증의 하위 작업인 치명적인 오류 탐지는 번역의 오류 중에서도 정치, 경제, 사회적으로 문제를 일으킬 수 있을 만큼 심각한 오류를 찾는 것을 목표로 한다. 본 논문은 치명적인 오류의 유무를 분류하는 것을 넘어 문장에서 치명적인 오류가 존재하는 부분을 제시하기 위한 새로운 데이터셋과 모델을 제안한다. 이 데이터셋은 거대 언어 모델을 활용하는 구축 방식을 채택하여 오류의 구체적인 범위를 표시한다. 또한, 우리는 우리의 데이터를 효과적으로 활용할 수 있는 다중 작업 학습 모델을 제시하여 오류 범위 탐지에서 뛰어난 성능을 입증한다. 추가적으로 언어 모델을 활용하여 번역 오류를 삽입하는 데이터 증강 방법을 통해 보다 향상된 성능을 제시한다. 우리의 연구는 기계 번역의 품질을 향상시키고 치명적인 오류를 줄이는 실질적인 해결책을 제공할 것이다.