• 제목/요약/키워드: Spacing rate

검색결과 349건 처리시간 0.027초

외부부착 보강된 교량 바닥판 균열폭의 반경험적인 예측 (Semi-Empirical Prediction of Crack Width of the Strengthened Bridge Deck with External Bonding Plastic)

  • 심종성;오홍섭
    • 콘크리트학회논문집
    • /
    • 제14권2호
    • /
    • pp.231-238
    • /
    • 2002
  • 콘크리트 교량 바닥판은 건조수축 및 온도변화 등에 의하여 초기 1차균열이 발생하고, 사용기간 동안 반복되는 차량하중의 크기와 철근 간격 등에 의하여 초기 균열이 이방향 균열로 점차 발전하게 된다. 그러나 현재 사용되고 있는 대부분의 균열 예측식이 일방향 부착-슬립이론에 기초하고 있기 때문에 철근과 보강재의 간격에 따라 변화되는 교량 바닥판의 균열폭을 예측하고 보강된 바닥판의 사용성을 평가하기에는 많은 어려움이 있다. 따라서 본 연구에서는 시험결과에 기초하여 성능향상된 바닥판의 균열 메카니즘을 구명하였으며, 이로부터 사용성을 평가할 수 있는 새로운 균열예측식을 제안하였다. 제안된 균열예측식은 기존 균열식에 비하여 예측결과가 우수한 것으로 나타났으나, 철근 항복 이후 철근과 보강재의 변형률이 급격히 증가할 때 오차범위가 커지는 것으로 나타나 추가적인 연구가 필요한 것으로 판단된다. 따라서 보다나은 균열예측을 위해서는 피로 하중하에서의 철근 항복이후에 대한 추가적인 연구가 필요한 것으로 판단된다.

부순모래를 사용한 습식 숏크리트의 광물성 혼화재료 혼입에 따른 내구성 평가 (Durability Assessment for Crushed Sand Wet-mix Shotcrete Mixed with Mineral Admixtures)

  • 이겨레;한승연;남궁경;윤경구
    • 콘크리트학회논문집
    • /
    • 제26권5호
    • /
    • pp.607-614
    • /
    • 2014
  • 본 논문에서는 품질확보를 위하여 혼합골재 입도분포를 적용한 부순모래 숏크리트에 플라이애시, 고로슬래그 미분말, 메타카올린, 실리카퓸을 종류 및 혼입률에 변동을 주어 혼입하여 숏크리트의 기초특성과 내구특성에 미치는 영향을 고찰하였다. 또한 각 혼화재료의 주요 혼입률을 선정하고 실제 숏팅을 실시 하여 숏팅 전 후의 기초특성과 내구특성을 분석하였다. 실내실험 결과 광물성 혼화재료 혼입률이 증가할수록 압축강도가 증가하는 경향을 보였다. 특히 메타카올린을 혼입한 경우 가장 우수한 강도 증진효과를 보였으며, 숏팅 후 압축강도 역시 코어링에 의한 강도감소 현상을 감안하여도 강도 발현이 우수한 혼화재료로 판단된다. 염소이온 침투저항성 시험과 황산저항성 시험 결과 광물성 혼화재료 혼입은 염소이온과 황산에 대한 저항성이 증진되는 경향을 보인다. 화상분석을 통한 공극구조 분석 결과 공기연행제를 사용하지 않아 소요의 간격계수와 비표면적을 얻는데 실패하였으며, 향후 공기연행제의 도입 후 실험이 진행될 필요성을 보이고 있다.

나카가미 페이딩 채널하에서 MIMO-OFDM 시스템의 성능분석 (Performance Analysis of MIMO-OFDM System over Nakagami Fading Channel)

  • 강경식;김원섭;박춘호
    • 한국정보통신학회논문지
    • /
    • 제15권8호
    • /
    • pp.1797-1804
    • /
    • 2011
  • 본 논문에서는 주변 환경에 따라 다양한 채널 상태를 나타낼 수 있는 분산형 나카가미 페이딩 채널하에서 선형의 시공간 블록코드 (Space-Time Block Code) 직교 설계로부터 평균 비트 에러율(Bit Error Rate)성능을 평가하여 MIMO(Multiple Input Multiple Output) 채널의 안테나 열 구성과 동작환경의 영향을 분석하였고 향상된 BER을 위한 MT 안테나의 설계조건과 페이딩 지수 m을 제안 한다. 시스템 성능의 분석을 위해 M-PSK(M-ary Phase Shift Keying)변조 방식과, M-QAM(M-ary Quadra -ture Amplitude Modulation)변조 방식을 사용 하였고, 분석 식은 각각 적분된 나카가미 페이딩 변수와 적분되지 않은 나카가미 페이딩 변수로부터 시스템의 성능을 비교 분석하였다. 채널 배열의 구성은 행렬의 수식적 계산에 의해 얻게 되며, AOA 확산이 감소하는 것에 따라 STBC(Space - Time Block Codes) BER성능이 감소하며, 이와 같은 손실은 안테나 간격의 증가나, 배열구성의 변경을 통해 보상 될 수 있다.

한면에 리브가 설치된 4벽면 수축/확대 채널의 난류 열전달과 유체마찰 (Turbulent Heat Transfer and Friction in Four-Wall Convergent/Divergent Square Channels with One Ribbed Wall)

  • 안수환;이명성
    • 대한기계학회논문집B
    • /
    • 제39권10호
    • /
    • pp.773-778
    • /
    • 2015
  • 가스터빈 냉각 장치인 블레이드 등과 같은 산업 설계를 개선하기 위해 사각 수축 및 확대채널에서 축방향의 거리에 따라 국부 난류 열전달과 압력강하에 대해 실험적으로 조사하였다. 수축 및 확대채널의 한 면에만 리브($10mm{\times}100mm{\times}5mm(t)$)를 연속적으로 배치하였고 충돌 각은 $90^{\circ}$로 피치(p)/높이(e)의 비는 10이 되도록 하였다. 수축채널의 수력직경비($D_{ho}/D_{hi}$)는 0.75, 확대채널의 수력직경비는 1.33 그리고 직선채널은 1.00이다. 열성능 비교를 위해 3가지 보편적인 제약 조건을 채택 하였다. 즉 동일 유량, 동일 펌프 동력 그리고 동일한 압력 강하이다. 3가지 조건모두 확대 채널에서 우수한 열 성능을 보였다.

경기북부지역 정밀 수치기후도 제작 및 활용 - I. 수치기후도 제작 (Development and Use of Digital Climate Models in Northern Gyunggi Province - I. Derivation of DCMs from Historical Climate Data and Local Land Surface Features)

  • 김성기;박중수;이은섭;장정희;정유란;윤진일
    • 한국농림기상학회지
    • /
    • 제6권1호
    • /
    • pp.49-60
    • /
    • 2004
  • Northern Gyeonggi Province(NGP), consisting of 3 counties, is the northernmost region in South Korea adjacent to the de-militarized zone with North Korea. To supplement insufficient spatial coverage of official climate data and climate atlases based on those data, high-resolution digital climate models(DCM) were prepared to support weather- related activities of residents in NGP Monthly climate data from 51 synoptic stations across both North and South Korea were collected for 1981-2000. A digital elevation model(DEM) for this region with 30m cell spacing was used with the climate data for spatially interpolating daily maximum and minimum temperatures, solar irradiance, and precipitation based on relevant topoclimatological models. For daily minimum temperature, a spatial interpolation scheme accommodating the potential influences of cold air accumulation and the temperature inversion was used. For daily maximum temperature estimation, a spatial interpolation model loaded with the overheating index was used. Daily solar irradiances over sloping surfaces were estimated from nearby synoptic station data weighted by potential relative radiation, which is the hourly sum of relative solar intensity. Precipitation was assumed to increase with the difference between virtual terrain elevation and the DEM multiplied by an observed rate. Validations were carried out by installing an observation network specifically for making comparisons with the spatially estimated temperature pattern. Freezing risk in January was estimated for major fruit tree species based on the DCMs under the recurrence intervals of 10, 30, and 100 years, respectively. Frost risks at bud-burst and blossom of tree flowers were also estimated for the same resolution as the DCMs.

응고조직 및 성분편석에 미치는 내부냉금의 효과 (The Effect of Internal Chills on the Solidified Structure and Chemical Segregation)

  • 김명한;조현남;김정겸;조형호
    • 한국재료학회지
    • /
    • 제9권9호
    • /
    • pp.883-889
    • /
    • 1999
  • 직경이 각각 4,6,8,12 및 15mm인 순Al 또는 Al-(1,2,3wt%) Cu합금 내부냉금이 95mm ø$\times$200mm H 크기의 흑연주형 중심부에 설치되었다. 이 내부냉금과 같은 조성의 용융금속이 $750^{\circ}C$의 주입온도에서 주형에 주입되었고, 냉각속도, 응고조직 및 성분편석이 분석되었다. 주괴직경/내부냉금직경의 비가 8까지 증가될수록 결정립도, 2차수지상간격 및 성분편석이 현저하게 감소됨이 확인되었다. 그러나 이 비가 8이상이 되면, 미용해 내부냉금이 발생되고, 내부냉금의 효과는 급속히 감소되었다. 순Al 및 Al-(1,2,3wt%)Cu 합금에서 최대 내부냉금 효과를 얻을 수 있는 적정 주괴직경/내부냉금직경의 비는 $750^{\circ}C$주입온도에서는 8이었다.

  • PDF

에어로졸 공정에 의한 Multiwall carbon nanotube/Graphene 복합체 제조 및 슈퍼커패시터 특성평가 (Synthesis of Multiwall Carbon Nanotube/Graphene Composite by Aerosol Process and Its Characterization for Supercapacitors)

  • 조은희;김선경;장한권;이총민;박수련;최지혁;장희동
    • 한국입자에어로졸학회지
    • /
    • 제12권4호
    • /
    • pp.127-134
    • /
    • 2016
  • A multiwall carbon nanotube (MWCNT)/graphene (GR) composite was synthesized for an enhanced supercapacitor. Aerosol spray pyrolysis (ASP) was employed to synthesize the MWCNT/GR composites using a colloidal mixture of MWCNT and graphene oxide (GO). The effect of the weight ratio of the MWCNT/GO on the particle properties including the morphology and layered structure were investigated. The morphology of MWCNT/GR composites was generally the shape of a crumpled paper ball, and the average composite size was about $5{\mu}m$. MWCNT were uniformly dispersed in GR sheets and the MWCNT not only increase the basal spacing but also bridge the defects for electron transfer between GR sheets. Thus, it was increasing electrolyte/electrode contact area and facilitating transportation of electrolyte ion and electron in the electrode. Electrochemical data demonstrate that the MWCNT/GR (weight ratio=0.1) composite possesses a specific capacitance of 192 F/g at 0.1 A/g and good rate capability (88% capacity retention at 4 A/g) using two-electrode testing system.

채널 간격이 일정한 WDM 전송에서의 Mid-Span Spectral Inversion을 이용한 보상 특성 (Characteristics of Compensation for WDM Transmission with Equally Spaced Channels using Mid-Span Spectral Inversion)

  • 이성렬;임황빈
    • 한국전자파학회논문지
    • /
    • 제15권6호
    • /
    • pp.619-626
    • /
    • 2004
  • 채널 간격이 100 ㎓로 일정하고 채널 비트율이 40 Gbps인 16-채널 WDM 시스템에 MSSI(Mid-Span Spectral Inversion) 기법을 적용한 경우의 4-광파 혼합(FWM: Four-Wave Mixing)에 의해 왜곡된 채널 신호의 보상 특성을 살펴보았다. MSSl를 통한 광대역 보상을 위해 광 위상 공액기(OPC: Optical Phase Conjugator)의 비선형 매질로 HNL-DSF(Highly-Nonlinear Dispersion Shifted Fiber)를 사용하였다. 우선 MSSI 기법을 이용하면 FWM에 의한 채널 간섭의 영향을 모든 채널에 걸쳐 특정 입력 전력 범위 내에서 비슷한 특성으로 줄일 수 있다는 것을 확인할 수 있었다. 그러나 OPC에 의해 생성되는 공액파 전력이 입력 신호파 전력에 비해 작은 장파장 채널들은 광섬유의 분산 계수가 커질수록 보상의 정도가 줄어드는 것도 알 수 있었다. 즉 분산 계수가 비교적 적은 광섬유를 통해 채널 간격이 일정한 WDM 채널들을 특정 전력 이내에서 양호한 품질로 전송하는데 HNL-DSF를 이용한 MSSI 보상 기법이 효과적이라는 것을 확인할 수 있었다.

Role of Information and Communication Technology and Women's Empowerment in Contraceptive Discontinuation in Indonesia

  • Samosir, Omas Bulan;Kiting, Ayke Soraya;Aninditya, Flora
    • Journal of Preventive Medicine and Public Health
    • /
    • 제53권2호
    • /
    • pp.117-125
    • /
    • 2020
  • Objectives: This study investigated the role of information and communication technology and women's empowerment in contraceptive discontinuation in Indonesia. Methods: The study used data from the 2017 Indonesia Demographic and Health Survey and monthly contraceptive calendar data. A Gompertz proportional hazards model was used for analysis. Results: The 12-month contraceptive discontinuation rate was higher among women who had used the Internet in the past year, women who were mobile phone owners, and women who reported having fully participated in household decision-making than among their counterparts. These factors significantly impacted the risk of contraceptive discontinuation in Indonesia, even after controlling for contraceptive method, age, parity, contraceptive intent, education, work status, place of residence, and wealth status. Conclusions: After adjustment for the control variables, a higher risk of contraceptive discontinuation was associated with having used the Internet in the past year, owning a mobile phone, and not participating in household decision-making. Higher contraceptive discontinuation risk was also associated with using contraceptive pills, older age, lower parity, intent of spacing births, more education, current unemployment, and rural residence, and the risk was also significantly higher for those in the lowest household wealth quintile than for those in the fourth household wealth quintile. The association of contraceptive discontinuation with the use of modern information and communication technology and relatively disempowerment in household decision-making may imply that information regarding family planning and contraception should be conveyed via social media as part of setting up an eHealth system. This must include a strong communication strategy to empower and educate women in contraceptive decision-making.

펨토초 레이저 주입잠금법을 이용한 광주파수 빗의 모드 선택과 증폭 (Mode Selection and Amplification of an Optical Frequency Comb Using Femto-Second Laser Injection-locking Technique)

  • 문한섭;김억봉;박상언;박창용
    • 한국광학회지
    • /
    • 제17권3호
    • /
    • pp.268-272
    • /
    • 2006
  • 펨토초 레이저 주입잠금법을 이용하여 펨토초 광주파수 벗에서 특정한 주파수 모드를 선택하고 증폭시켰다. 실험에서는 모드 잠금된 Ti:sapphire레이저를 지배 레이저로 그리고 단일모드로 발진하는 반도체 레이저를 종속 레이저로 사용하였다. 모드 잠금된 Ti:sapphire레이저를 중심파장 794.7 nm, 밴드 폭 1.5 nm의 간섭필터를 통과한 후 반도체 레이저에 주입잠금시켰다. 주입잠금된 반도체 레이저가 모드 잠금된Ti:sapphire레이저의 펄스 반복율과 일치하는 100.5 MHz간격의 모드 $3{\sim}4$개가 동시에 발진되는 것 확인할 수 있었다. 펨토초 레이저 주입잠금법에 의해서 선택된 모드의 출력을 수천 배 증폭시킬 수 있었다.