• Journal of Welding and Joining
• /
• v.19 no.4
• /
• pp.429-436
• /
• 2001

The effect of welding condition on the microstructures of the weld metal in A7N01 welded by $CO_2$ laser was investigated. The number of ripples was increased with decreasing power and increasing welding speed. In the bead without ripple lines, the subgrain microstructures distribution from the fusion line toward the center of the bead were in the order of cellular, dendritic and equiaxed dendrite. However, in the bead with ripple lines, cellular and dendritic were formed between the fusion boundary and the ripple line. Inaddition, those structures were also observed between the ripple line. Equiaxed dendrites were formed only at the center line region. Cellular and dendritics formed near the ripple line were larger than those formed near the fusion boundary. The cooling rates estimated by the dendrite arm spacing were in the range of 200 to 1150oC/s. Cooling rate was increased with decreasing the power and increasing the welding speed. Mg and Zn segregated at the boundaries of cellulars and dendritics, Mg was segregated more than Zn. The segregation of Mg and Zn decreased with increasing cooling rate. Hardness of the weld metal was lower than that of the base metal in all welding conditions and increased as the cooling rate increased.

• Communications for Statistical Applications and Methods
• /
• v.7 no.3
• /
• pp.955-958
• /
• 2000

In this paper, it will be shown that if the distribution function F of X is increasing (decresign) failure rate, then the spacings are engatively( Positively) dependent. Some numberical exmamples are illustrated.

• Korean Journal of Food Science and Technology
• /
• v.18 no.5
• /
• pp.351-356
• /
• 1986

The effects of drum spacing, steam pressure and drum speed on drying rate of minced fish flesh on both single and double drum dryers were studied. Starch additions in the form of tapioca flour up to 2.5% have been found satisfactory for aiding in sheet formation at the doctor blade. When the retention time was adjusted to maintain a constant product moisture, the highest production rate was obtained at the smallest drum spacing and the highest steam pressure within the limits of experimental conditions considered. The operating conditions suitable for producing the flakes with 5% moisture were: 100 kPa (steam pressure), 0.1 mm (drum spacing) and 3 rpm (drum speed). The production rate and overall heat transfer coefficient under these conditions were $12.1\;kg/m^2$hr and 950 $W\;/m^2K$ respectively. The drying data were fitted well to the conventional drying model, namely $MR\;=\;A\;\exp\;(-k{\theta})$, resulting in the various drying constants depending the operating conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.1
• /
• pp.140-148
• /
• 1999

Experiments on flame spread in an one-dimensional droplet array up to supercritical pressures of fuel droplet have been conducted In normal gravity and microgravity. Evaporating process around unburnt droplet is observed through high-speed Schlieren and direct visualizations in detail, and flame spread rate is measured using high speed chemiluminescence images of OH radical. Flame spread behaviors are categorized into three: flame spread is continuous at low pressures and is regularly intermittent up to the critical pressure of fuel. flame spread is irregularly intermittent and zig-zag at supercritical pressures of fuel. At atmospheric pressure, the limit droplet spacing and the droplet spacing of maximum flame spread rate in microgravity are larger than those in normal gravity. In microgravity, the flame spread rate with the increase of ambient pressure decreases initially, takes a minimum, and then decreases after taking maximum. This is so because the flame spread time is determined by competing effects between the increased transfer time of thermal boundary layer due to reduced flame diameter and the reduced ignition delay time in terms of the increase of ambient pressure. Consequently, it is found that flame spread behaviors in microgravity are considerably different from those in normal gravity due to the absence of natural convection.

• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.42-53
• /
• 2013

The percussion rate and spacing of the button of drill bit are very important in maximizing the drilling efficiency. Therefore, a series of percussion tests using Hopkinson bar system was carried out to assess the fragmentation performance against the beat rate and spacing of a drill bit. First, single percussion test complemented with numerical simulation was performed to analyze rock fragmentation phenomenon and to describe the fragmentation process. Next, multiple percussion test that repetitively strike the rock sample moving at predetermined rate was carried out to predict drilling efficiency against the button spacing. After the tests, the fragmented volume of the rock was measured by laser scanner and the drilling performance was analyzed using the calculated percussive energy and measured negative volume. Based on the results, the single impact performance of drill bit with 102 mm diameter was predicted.

• Korean Journal of Metals and Materials
• /
• v.47 no.7
• /
• pp.440-446
• /
• 2009

Co base superalloys have been widely used for the parts of gas turbine due to their excellent strength, thermal fatigue, oxidation resistance and weldability at high temperature. In this study, directional solidifications were carried out at various solidification rates, including $0.5{\sim}300{\mu}m/s$ in the Co base superalloy FSX-414. The cellular interface were formed at a low solidification rate, $1{\mu}m/s$, and the dendritic interface was found at higher solidification rates, $5{\sim}300{\mu}m/s$. As the spacing of dendrite structure decreased, the size and spacing of eutectics decreased. Dendrite arm spacing decreased with increasing solidification rates and temperature gradient. It was interesting to find the $M_{23}C_{6}$ eutectic microstructure formed between $\gamma$ dendrites. Composition analysis showed that Cr and W were segregated severely between the dendrites, which resulted in the formation of Cr-rich $M_{23}C_{6}$ and W-rich MC carbides.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.2
• /
• pp.303-314
• /
• 1993

The purpose of this study was to find out the prevalence of dental anomalies in 600 normal persons (male:363, female:237) at age 14 to 39 years, through history taking, oral examination, and radiographic observations of subjects. The obtained results were as follows: 1. The prevalences of individual dental anomalies were as follows; Congenitally missing teeth 7%; supernumerary teeth 1.33%; ectopic eruption; 8.50%, transposition;0.33% rotation; 23.67%, microdontia;11.16%(peg lateralis;5.33%, third molar;5.83%), prolonged retention of deciduous teeth;1.33%, crowding 49.83%, and spacing;15.17%. 2. Alterations in numbers of teeth : The most frequently missing teeth were mandibular lateral incisors, followed by mandibular second premolars and maxillary second premolars. In numbers of congenitally missing teeth per person, 52.38% had one missing tooth and 30.95% had two missing teeth. In supernumerary teeth, there was higher rate in male than in female. Most supernumerary teeth were mesiodens of median area in maxilla and the eruption pattern of that teeth generally was unerupted state. 3. In transposition, exchange of position of teeth involved the canine and first premolar. 4. Congenital missing rate of permanent successors in prolonged retention of deciduous teeth was 69.23%. 5. Crowing and spacing had respectively higher rate in mandible and in maxilla.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.17-29
• /
• 1970

To research the seeding systems and the varieties adapted to mechanization in barley and wheat culture in Korea, the studies were carried out from October, 1969 to June, 1970 at Suwon. In these studies, six kinds of seeding systems of drilling and dibbling that seems to adapted to mechanization were tested as compared with the customary seeding system, furrowing moderately or widely, using three varieties of barley, Suwon ＃18, Barsoy and Buhufng, and three varieties of wheat, Wonkwang, Yucseung ＃3 and Yeungkwang, under the two fertilizer levels of standard and double. The summarize results gained were as follows; 1. Buhung seemed to be the most suitable variety in barley as it yielded the most and matured early and grew the safest. Barsoy suffered from winter injury. 2. Yeungkwang seemed to be the most suitable variety in wheat as it yielded the most and produced the largest grain ani grew the safest, however it matured late. Wonkwang suffered heavily from lodging injury. 3. More yield were produced and there were no increase of cultural dangers except lodging in double fertilizer level. 4. Seeding system of drilling and dibbling seems to be able to put in practice safely under the double fertilizer level when lodging resistant varieties are selected. 5. Rate of yields increase in comparison with the customary seeding system of moderate furrowing were 16 percent in drilling of 20 centimeter spacing, 13 percent in wide furrowing and 12 percent in dibbling of 20 ${\times}$ 12 centimeter spacing in barley and also 9 percent in wide furrowing, 8 percent in dibbling of 20 ${\times}$ 12 centimeter spacing and 7 percent in drilling of 20 centimeter spacing in wheat. 6. The most important cause of above yields increase seems to be the increase of spike number per unit area. 7. Yields increase by drilling as compared with furrowing was not caused by higher rate of seeding. 8. The plants matured a bit earlier by drilling and dibbling. 9. Better stands of seedling were fount in dibbling due to the promotion of germination by tramping. 10. An increase of yields will be expected by decreasing the spacing in drilling and dibbling.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.256-261
• /
• 2013

The spacing between plug cells and cell volume of each plug cell for nursing tomato seedlings were studied to know the effects on seedling growth and early yield. There were four treatments. The spacing of plug cells was done (OK) or not (NO) in case of cell spacing. The cell number in a plug tray was set to 40 or 50 in case of cell volume. The growth environment and irrigation regime were the same in all of the treatments during the experiment period. The photosynthetic rates, seedling qualities, yield and yield speed were significantly affected by both of the treatments. The photosynthetic rates and seedling qualities were the best in 40S-OK following by 50S-OK, 40S-NO, and 50S-NO while the yield was the best in 40S-OK following by 40S-NO, 50S-OK, 50S-NO. It means the spacing gives more impact than the cell volume in the stage of nursing but the cell volume gives more impact than the spacing after the stage of nursing. In the conclusion the spacing of plug cells in appropriate nursing stage is needed with the appropriate cell volume to make high quality of seedlings and high yield.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.84-90
• /
• 2007

As a result of vehicle maintenance of rocker arm shaft for 4-cylinder SOHC engine, failure stress analysis of rocker arm shaft is needed. Because more than 30% of vehicles investigated have been fractured. Failure stress analysis is classified into an naked eyes, microscope, striation and X-ray fractography etc. Failure stress analysis by using striation is already established technology as means for seeking cause of fracture. But, although it is well known that striation spacing corresponds to the crack growth rate da/dN, it is not possible to determine ${\sigma}_{max}\;and\;{\sigma}_{min}$ under service loading only from striation spacing. This is because the value of striation spacing is influenced not only by ${\Delta}K$ but also by the stress ratio R. In the present paper, we determine the stress ratio using orthogonal array and ANOVA, and propose a prediction method of failure stress which is combined with FEM and striation.