• Journal of the Korean GEO-environmental Society
• /
• v.23 no.6
• /
• pp.5-17
• /
• 2022

The performance of the relief wells installed for the purpose of controlling seepage of the dam embankment is affected by various parameters such as diameter, spacing, penetration rate, permeability coefficient of the ground, thickness of the foundation layer. Therefore, when the relief wells are adopted for the purpose of reducing seepage pressure, these parameters should be sufficiently reviewed to determine the installation specifications of the relief wells. This study evaluated the effect of the length of the geosynthetics blanket on the performance of the relief wells installed in the downstream part of the dam embankment with blankets in the upstream and downstream part of the dam embankment as countermeasure methods to control seepage of the dam embankment. In the relationship between the length of the upstream and downstream blanket and the discharge, the discharge of the relief wells decreases as the length of the upstream blanket increases, and on the other hand, the discharge of the relief wells decreases as the length of the downstream blanket increases. In the upper and lower blanket length-spacing relationship, as the length of the upstream blanket increases, the spacing of the relief wells increases and as the length of the downstream blanket increases, the spacing of the relief wells decreases. Therefore, when installing the relief wells in parallel with the blanket, it was found that increasing the length of the upstream blanket is more efficient than increasing the length of the downstream blanket in order to minimize the discharge of seepage discharge and to ensure economic feasibility by wider installation of the relief wells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.167-171
• /
• 1995

The orientation dependence of sputtering rate in the sendust polysrystalline targets was studied, It was fount from the present work that the erosion process is not uniform from one grain to another even within a target because of its polysrystalline nature showing many different orientation of grains. The grains oriented to promote efficient erosion were characterized by the close-packed planes which have large interplanar spacing and strong binding energy, The characteristic line patterns appeared on as-sputter target surface are discussed in terms of symmetry of crystllographic planes.

• Journal of Plant Biology
• /
• v.15 no.2
• /
• pp.7-19
• /
• 1972

The studies of density effect or the effect of population density on plant growth have been done on basis of dry matter production with Raphanus acanthiformis var. simoodaeguen, Brassica campestris var. Pekinensis f. namsounsokoombecheu, Oryza sativa f. kimmajae and O. sativa f. mangyeng grown in the various spacing. 1. In the early period of plant growth in dry weight was not different each other among varying densities, but as time advanced the plant grown vast space grew sufficiently compared with those of narrow one. 2. Iogarithmic relation between the growth of plant (W) and the density (P), log W-log P in the material plants, were approximated by two straight lines, one was horizontal line and another inclined: the former showed non-competition density and the latter competition density addition to these the point interlinking both lines were implied of the optimum density per unit land area at certain growth period. 3. The values of relatvie growth rate (RGR) and net assimilation rate (NAR) were decreased as increase in the density, while those of leaf area ratio (LAR) were rather increased in the same condition, with minor exception. From these results and relation between the productive structure and due to lack of the recieved light intensity owing to the mutal shading among the plants.

• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.577-582
• /
• 2008

Directional solidification experiments were carried out at $1-300\;{\mu}m/sec$ solidification rates in the single crystal superalloy, CMSX 10. The solid/liquid interface morphology changed from planar to dendritic, and the dendrite spacing became finer as the solidification rate increased. The pool size of the ${\gamma}/{\gamma}'$ eutectic, formed between dendrites, reduced as the solidification rate increased. The phase formation temperatures, such as the solidus, liquidus and eutectic, were estimated by differential scanning calorimetry (DSC) analysis. The morphology of the ${\gamma}/{\gamma}'$ phase, known to be eutectic, showed ${\gamma}'$ cells with a $\gamma$ intercellular network, and this ${\gamma}/{\gamma}'$ was composed of coarse and fine ${\gamma}/{\gamma}'$ regions. In this study, it is suggested that the ${\gamma}/{\gamma}'$ phase was a coupled peritectic.The solidification procedure of the ${\gamma}/{\gamma}'$ between dendrites is also discussed.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.217-225
• /
• 1995

This study was conducted to find design factors of spraying device of the boom sprayer for low volume application. Four types of nozzles(standard flat nozzle, drift guard nozzle, even flat nozzle, and hollow cone nozzle) were used for the spray characteristic experiment. Spray patterns of the nozzles were distinguished by the nozzle type, spray distance, and spray direction. The flow rate was proportional to the square root of spray pressure in all nozzles. Increased nozzle height improved spray distribution at reduced pressures and/or increased spacing. Distribution tended to improve as pressure increased within the range of pressures used for fan nozzles.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.49-54
• /
• 2006

The purpose of this study was to determine the effect of expansion joint spacing (slab size) on the life cycle costs of owning Portland Cement Concrete (PCC) airfield pavements. Previous research has shown that slab size has a statistically significant impact on pavement performance. A probabilistic life cycle cost analysis was performed to determine if the effect of slab size on pavement performance would affect the total cost of ownership of PCC pavements. Data from 48 Pavement Condition Index (PCI) inspections of military and civilian airfields were used to develop probability-of-distress-by-condition curves, which were then used to develop probabilistic cost-of-repair-by-condition curves. A present worth life cycle cost analysis was then performed for various slab sizes, using construction costs, rehabilitation costs, and maintenance costs. Maintenance costs were determined by assuming a condition deterioration rate appropriate for each slab size and applying the cost-by-condition curves. The probabilistic cost-of-repair-by-condition curves indicated that smaller slabs are more expensive to repair on a unit cost basis. Life cycle cost analysis showed that larger slabs have a higher total cost of ownership than smaller slabs due to a faster rate of deterioration.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.99-104
• /
• 1997

A novel driving theory on the electrohydrodynamic (EHD) pump driven by traveling electric fields without the temperature gradient is proposed. The equations of the generating pressure and the flow rate are derived. The EHD micropump is fabricated by micromachining technology and tested. The channel heights are 50$\mu\textrm{m}$, 100$\mu\textrm{m}$ and 200$\mu\textrm{m}$ are respectively an the channel width is 3 mm. The spacing and width of the electrodes are both 40$\mu\textrm{m}$. The maximum pressure is 70.3 Pa, 35.4 Pa and 17.2 pa at he frequency of 0.2Hz for each channel height (50$\mu\textrm{m}$, 100$\mu\textrm{m}$ and 200$\mu\textrm{m}$) and the maximum flow rate is 0.90x10\ulcorner ${\mu}$$\ell$/min, 1.88x10\ulcorner ${\mu}$$\ell$/min and 4.85x10\ulcorner ${\mu}$$\ell$/min at the frequency of 0.4H for each channel height.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.277-283
• /
• 2000

The heat transfer characteristics for air jet vertically impinging on a flat plate which had a set of hybrid rod were investigated experimentally. The rod had a cross section made with a half of circular cross section and that of rectangular and was installed in front of the plate. The heating surface was given constant heat flux value of 1020 W/$m^2^{\circ]C$ and the problem parameters investigated were jet Reynolds number, nozzle-to-plate spacing and the rod size. The local and local average Nusselt number characteristics were found to be dependent on the rod size because the flow was disturbed by installing the rod. Higher convective heat transfer rate occurred in the whole plate as well as in the stagnation region.

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.578-581
• /
• 2004

In this study, we proposed the novel method that can crystallize the amorphous silicon by adjacent Pd-MILC enhanced Ni-MILC. With this method, the MILC rate was about 15 ${\mu}$m/h at 550$^{\circ}C$ which is four times faster than conventional MILC rate. The crystallization rate increased rapidly with the spacing between Ni and Pd decreased. And it was independent on Ni and Pd layer thickness and amorphous silicon active width. However, when Pd was capped by a Ni layer, there's no enhancement on Ni-MILC. This phenomenon implies that the enhancement of Ni-MILC rate comes from not Pd material itself but Pd-MILC induced tensile stress. We can explain these phenomena with a novel MILC mechanism.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.5
• /
• pp.332-335
• /
• 2005

The three Korean wheat cultivars with different plant types; the erect, the middle and the creeping growth habit, were studied for their utilization to solar radiation, temperature changes on the furrow and to provide optimum planting space for producing the high yield in 2003. The average solar radiation rate was lowest for creeping type ($39.2\%$) and highest for erect type ($75.8\%$) The correlation coefficient between the coverage rate and the solar transmission rate was r = 0.8624 which was significant at $5\%$ level. The relative growth of the plant, tiller rate and leaf size was increased in the erect and the middle type at lower plant density, while no change on plant growth at creeping type regardless of plant density. The increase of leaf size in the lower plant density was due to longer flag and the first leaf than those of other plant types. The temperature on the furrow of growing plants was changed by the canopy. The changes in temperature pattern on the furrow according to plant types during winter season was different compared to the non plant ground. The temperature of the nonplant ground was the lowest due to solar reduction increasing the amount of cool air flowing in the furrow.