• 한국정밀공학회지
• /
• 제33권3호
• /
• pp.217-223
• /
• 2016

In this paper, the movement of a liquid metal droplet in a channel by continuous electrowetting effect is analyzed. The channel is fabricated using two glass substrates and silicone rubber as spacers, and a mercury droplet and dilute sulfuric acid are added into the channel. The droplet is moved according to voltage applied at both ends of the channel through an electrolyte. According to the shape of the droplet and the applied voltage, the velocity of the droplet is changed. The velocity is proportional to the applied voltage and inversely proportional to the length of the droplet, both theoretically and experimentally. Contact angle hysteresis and a meniscus change were also found in the moving state. This implies the existence of a threshold in movement by Laplace pressure difference. The experiment indicated that the sliding angle was inversely proportional to the width of the droplet but that the voltage threshold was proportional to the width.

• 한국수산과학회지
• /
• 제50권5호
• /
• pp.624-629
• /
• 2017

A rainbow trout Onchorhynchus mykiss farm located in Gangwon province, South Korea, experienced approximately 10% mortality in June 2017. Most diseased fish had a markedly distended, gas-filled stomach, and exhibited abnormal behavior at the water surface. In this study, we attempted to identify the cause of stomach distension syndrome in those rainbow trout. The stomach of most of the affected fish were full of unidentified gases and some exudate, and yeast was isolated from the stomach mucosa. Pure cultures of yeast were identified using a multilocus sequence typing scheme based on 18S rRNA, internal transcribed spacers, large subunit rRNA, and the gene encoding the largest subunit of RNA polymerase II (RPB1). The RPB1 gene sequences were compared with those of related species available in a database. The yeast was identified as Scheffersomyces coipomoensis (Candida coipomoensis) based on sequence analyses. This is the first study to reveal that Sch. coipomoensis is a potential causative agent of stomach distension syndrome in farmed rainbow trout. Our results will be helpful for future related studies, and indicate that farmers and stakeholders should observe this emerging disease closely.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.446-449
• /
• 2006

가공 송전선로의 경과지는 대부분 낮은 산악지로서 때때로 국지적인 기상현상에 노출되어 있다. 이러한 현상으로 매년 11월부터 익년3월 사이에 국지성 톨풍에 의한 갤로핑(Galloping)현상이 발생한다. 이 현상이 우리 전력소의 154kV 금포T/L(금오 S/S-포천S/S)에서 발생하였다. 갤로핑 현상은 바람으로 인하여 전력선이 횡진과 출렁임이 발생하는 것을 말하며, 전력선이 심한 진동을 일으켜 전력선 상간 또는 전력선과 가공지선간의 혼촉으로 고장전류가 생기고, 고장전류에 의한 보호계전기 동작으로 선로가 Trip되며, 이로 인하여 전력공급이 중단된다. 또한 전력선의 기계적인 진동에 의하여 전력선의 단선으로 영구고장을 일으킬 수 있다. 본 논문에서는 경기북부지역의 산악지에 설치된 154kV 송전선로에서 산비탈면을 타고 오르는 상승 바람에 의한 갤로핑 사례를 국내 최초로 현장에서 촬영한 동영상 자료를 토대로 소개하고, 갤로핑 발생시 송전선로에 미친 영향 등 검토 결과를 알아본다. 그리고 전력선 상호간 혼촉이 발생한 지점의 아크 흔적을 설명하고, 갤로핑으로 인한 상간 혼촉방지를 목적으로 개발된 폴리머 상간 스페이서의 시공사례를 소개하며, 현재까지 상간 스페이서(interphase spacer)가 설치된 송전선로의 점검 결과를 소개하고자 한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.236-242
• /
• 2007

A theoretical and numerical investigation is performed on the flow in a micronozzle for precision-controlled seal dispenser. The working fluid is a highly viscous epoxy used as sealant in producing LCD panels, which contains a number of tiny solid spacers. Flow analysis is conducted in order to achieve the optimal design oj internal geometry of a nozzle. A simplified design analysis methodology is proposed for predicting the flow in the nozzle based on the assumption that the Reynolds number is much less than O(1). The parallel numerical computations are performed by using a CFD package FLUENT. Comparison discloses that the theoretical model gives a good prediction on the distribution of pressure and wall shear stress in the nozzle. However, the theoretical model has a difficulty in predicting the maximum wall shear stress as found in a limited region near edge by numerical computation. The theoretical and numerical simulations provide the good guideline for designing a dispensing micronozzle.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.896-901
• /
• 2006

Patulin is a food mycotoxin which induces genotoxicity and acute intestinal disease in infants. Patulin mainly originates from fruit putrefactive moulds, especially in apples, which necessitates the maintenance of strong safety standards against patulin for fresh and processed apples. To investigate the patulin producing moulds in Korean apples, 16 morphological types of fungi were isolated from Korean apples and a patulin producing fungus was identified based on a sequence analysis of the region of internal transcribed spacers (ITS5-5.8S-ITS4 region, 505 base pair) and the 26 rRNA D1/D2 region (527 base pair). Morphological analyses were also performed. The isolated patulin producing fungus was found to a representative species of Penicillium crustosum. The maximal patulin production ability of the isolated fungus (P. crustosum) and the patulin producing standard strain (P. griseofulvum, ATCC 46037) in an SY broth medium were 0.32 and 2.46 mg/L, respectively.

• 대한화학회지
• /
• 제7권1호
• /
• pp.58-64
• /
• 1963

Authors propose a new technique using polyethylene film instead of sodium chloride window as a cell material. Nujol mulls, liquids and aqueous solutions are sandwitched between two pieces of polyethylene film which are held between cardboards. Ordinary lead or stainless steel spacers could be used if exact cell thickness is desired. A more elaborate cell can be assembled by injecting samples between two pieces of polyethylene film which are placed between sodium chloride windows of ordinary demountable liquid cell. The absorption bands due to polyethylene and Nujol are compensated by placing the polyethylene film of suitable thickness in the reference beam. The absorption bands due to solvents such as water can also be compensated by the polyethylene film cell sandwitched solvent of suitable thickness in the reference beam. This method would be a simple new technique. Especially this technique may offer a new helpful way for the investigation of the state of substances in aqueous system. Using this technique, authors have observed the appearance of an absorption bands at 3.2 micron, in the spectrum of phenol in aqueous solution, that is absent in the spectrum of phenol in benzene solution. The same absorption band also has been observed in the spectra of aqueous formaldehyde solution and aqueous polyvinyl alcohol solution, where the absorption bands due to polyethylene and water are compensated. Although it may be regarded that this absorption band is related to the intermolecular interaction between water and the solute having OH group, that is hydrogen bonding. The exact assignment of this absorption band is out of this work.

• 한국시뮬레이션학회논문지
• /
• 제23권4호
• /
• pp.131-142
• /
• 2014

휴대폰 카메라의 렌즈 모듈은 경통, 복수의 렌즈, 복수의 스페이서와 한 장의 쉴드로 구성된다. 렌즈 모듈을 생산하기 위한 주요 공정으로는 사출성형공정, 코팅공정 및 조립공정이 있는데, 일반적으로 제조라인에서는 동일한 기능을 가지는 복수의 기계들을 사용하여 생산을 한다. 본 논문에서는 긴급주문, 금형의 파손, 장비의 고장 등으로 인하여 제조현장에서 빈번하게 발생하는 재스케줄링의 문제를 해결하기 위해 시뮬레이션을 기반으로 개발된 스케줄러에 대해 소개한다. 스케줄링 알고리즘은 경험적 Backward-Forward 방법을 사용하였으며, 주문의 납기지연율을 최소화시키는 것이 목표다.

• 대한미생물학회지
• /
• 제35권1호
• /
• pp.49-60
• /
• 2000

ITSI-5.8S-ITSII rDNA region was amplified from the reference strains and clinical isolates with ITS1 and ITS4 primers. These primers amplified DNA fragments of 550 bp in Microsporum audouinii and Trichophyton violaceum, 700 bp in Microsporum gypseum, Trichophyton mentagrophytes, Trichophyton rubrum, and Trichophyton tonsurans, and 750 bp in Microsporum ferreugineum and Microsporum canis. The restriction enzyme patterns of PCR products digested with 13 restriction enzyme including PstI were distint among the genera, whereas identical in the same species. Examination of the ITS (Internal Transcribed Spacers)1 nucleotide sequence revealed that there was the genetic difference in each genera and species. Phylogenetic relationship among each species showed that the Trichophyton mentagrophytes was more closely related Trichophyton tonsurans than Trichophyton rubrum, and Microsporum gypseum was less related than Microsporum spp..

• 한국버섯학회지
• /
• 제4권2호
• /
• pp.43-47
• /
• 2006

국내에서 재배하여 생산되고 있는 상황버섯의 일종인 PMO-P4균주에 대한 ITS 영역의 염기서열 분석을 실시하였으며 목질 진흙버섯으로 잘 알려져 있는 P. linteus와 함께 RFLP분석을 통하여 상호 비교한 결과 PMO-P4균주는 P. baumii로 판명되었다. 이 결과를 토대로 이미 보고되어 있는 Phellinus속 균주들과의 종간 ITS 영역의 상동성을 비교한 결과 48.6%-72.2%였으며 본 연구에서 비교한 종들 가운데서는 P. linteus와 상동성이 가장 높았으며 P. gilvus와 상동성이 가장 낮았다.

• Journal of Plant Biotechnology
• /
• 제44권3호
• /
• pp.235-242
• /
• 2017

Cudrania tricuspidata Bureau is a widely-used, medicinal, perennial and woody plant. Obtaining information about the genetic diversity of plant populations is highly important with regard toconservation and germplasm utilization. Although C. tricuspidata is an important medicinal plant species registered in South Korea, no molecular markers are currently available to distinguish Korean-specific ecotypes from other ecotypes from different countries. In this study, we developed single nucleotide polymorphism (SNP) markers derived from the chloroplast and nuclear genomic sequences, which serve to to identify distinct Korean-specific ecotypes of C. tricuspidata via amplification refractory mutation system (ARMS)-PCR and high resolution melting (HRM) curve analyses. We performed molecular authentication of twelve C. tricuspidata ecotypes from different regions using DNA sequences in the maturaseK (MatK) chloroplast intergenic region and nuclear ribosomal DNA internal transcribed spacer (ITS) regions. The SNP markers developed in this study are useful for rapidly identifying specific C. tricuspidata ecotypes from different regions.