• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.302-309
• /
• 2004

The transmission capacity of wireless communication systems may become dramatically high by employ multiple transmit and receive antennas with space-time coding techniques appropriate to multiple transmit antennas. For large number of transmit antennas and at high bandwidth efficiencies, the receiver may become too complex whenever correlation across transmit antennas is introduced. Reducing decoding complexity at receiver by combining array processing and space-time codes (STC) helps a communication system using STC to overcome the big obstacle that prevents it from achieving a desired high transmission rate. Multi-carrier CDMA (MC-CDMA) allows providing good performance in a channel with high inter-symbol interference. Antenna array, STC and MC-CDMA system have a similar characteristic that transmit-receive data streams are divided into sub-streams. Thus, there may be a noticeable reduction of receiver complexity when we combine them together. In this paper, the combination of array processing and STC in MC-CDMA system over slow selective-fading channel is investigated and compared with corresponding existing MC-CDMA system using STC. A refinement of this basic structure leads to a system design principle in which we have to make a trade off between transmission rate, decoding complexity, and length of spreading code to reach a given desired design goal.

• Information and Communications Magazine
• /
• v.18 no.6
• /
• pp.119-125
• /
• 2001

1990년 초반부터 송신 다이버시티에 대한 연구가 있어 왔다. 1990년 후반부터는 송수신 다이버시티에 대한 실용적인 결과가 부호 이론과 접목이 되면서 나오기 시작한다. 그 중에서 매우 유용한 결과인 Space-Time 부호에 대하여 다룬다. 본 논문에서는 직교 Space-Time block code. Layered Space-Time processing, 그리고 Space-Time trellis Coding의 세 가지로 분류하여 내용을 정리한다.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.105-108
• /
• 2007

The COMS LRIT/HRIT broadcast service should satisfy the 15 minutes timeliness requirement. The timeliness requirement is an important enough to impact on the overall performance of LHGS. Therefore, the simulation for the LHGS processing was performed with the LHGS prototype in this paper. First, processing time is measured for each process (per modules) of the LHGS without I/O time. Then, the LHGS processing is performed with worst scenario and the processing time is measured. Finally, analyses for processing time and time constraint are performed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.3
• /
• pp.167-167
• /
• 2004

The system combined layered space-time processing and space-time trellis codes (STTC) provide high transmission rate as well as diversity and coding gain without bandwidth expansion. In this paper, two layered receiver structures are proposed. One is the LSTT-MMSE in which received bit streams are decoupled by interference nulling and then decoded by separate STTC decoders. The decoded outputs are cancelled from the received signal before advancing to the next layer detection. The other is LSTT-Whitening employing whitening rather than nulling. The receiver employing whitening process shows several advantages on diversity gain and the required number of receive antennas compare to the convolutional coded space-time processing. The proposed receivers use different decoding order scheme according to each interference suwression. The (4, 3) LSTT-Whitening receiver still achieves 1㏈ gain over the (4, 4) LSTT-MMSE and the (4, 4) coded layered space-time processing.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.3
• /
• pp.9-14
• /
• 2004

The system combined layered space-time processing and space-time trellis codes (STTC) provide high transmission rate as well as diversity and coding gain without bandwidth expansion. In this paper, two layered receiver structures are proposed. One is the LSTT-MMSE in which received bit streams are decoupled by interference nulling and then decoded by separate STTC decoders. The decoded outputs are cancelled from the received signal before advancing to the next layer detection. The other is LSTT-Whitening employing whitening rather than nulling. The receiver employing whitening process shows several advantages on diversity gain and the required number of receive antennas compare to the convolutional coded space-time processing. The proposed receivers use different decoding order scheme according to each interference suwression. The (4, 3) LSTT-Whitening receiver still achieves 1㏈ gain over the (4, 4) LSTT-MMSE and the (4, 4) coded layered space-time processing.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1575-1578
• /
• 2002

본 논문에서는 공간-시간 블록 부호디자인(Space-Time Block Code) 관점에서 직교-디자인(Orthogonal-design) 즉, 최소거리가 5이면서 완전-계수(Full-Rank)인 디자인을 비교대상으로 완전-계수(Full-Rank)가 아니면서 최소거리가 5와7인 두 부호에 관하여 연구되어졌다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.223-229
• /
• 2004

Recently, OFDM and STC techniques have been considered to be candidate to support multimedia services in the next generation mobile radio communications and have been developed the many communications systems in order to achieve the high data rates. In this paper, we propose the Trellis-Coded Differential Space Time Modulation-OFDM system with multiple symbol detection. The Trellis-code performs the set partition with unitary group codes. The Viterbi decoder containing new branch metrics is introduced in order to improve the bit error rate (BER) in the differential detection of the unitary differential space time modulation. Also, we describe the Viterbi algorithm in order to use this branch metrics. Our study shows that such a Viterbl decoder improves BER performance without sacrificing bandwidth and power efficiency.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.4
• /
• pp.279-286
• /
• 2018

Radar sensors are used for space situational awareness (SSA) to determine collision risk and detect re-entry of space objects. The capability of SSA radar system includes radar sensitivity such as the detectable radar cross-section as a function of range and tracking capability to indicate tracking time and measurement errors. The time duration of the target staying in a range cell is short; therefore, the signal-to-noise ratio cannot be improved through the pulse integration method used in pulse-Doppler signal processing. In this study, a method of improving the signal-to-noise ratio during range migration is presented. The improved detection performance from signal processing gains realized in this study can be used as a basis for comprehensively designing an SSA radar system.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.58.1-58.1
• /
• 2019

We have developed Ground Software (GSW) of BITSE. The ground software includes mission operation software, data visualization software and data processing software. Mission operation software is implemented using COSMOS. COSMOS is a command and control system providing commanding, scripting and data visualization capabilities for embedded systems. Mission operation software send commands to flight software and control coronagraph. It displays every telemetry packets and provides realtime graphing of telemetry data. Data visualization software is used to display and analyze science image data in real time. It is graphical user interface (GUI) and has various functions such as directory listing, image display, and intensity profile. The data visualization software shows also image information which is FITS header, pixel resolution, and histogram. It helps users to confirm alignment and exposure time during the mission. Data processing software creates 4-channel polarization data from raw data.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.467-475
• /
• 2016

Ultrasonic propagation imaging (UPI) has shown great potential for detection of impairments in complex structures and can be used in wide range of non-destructive evaluation and structural health monitoring applications. The software implementation of such algorithms showed a tendency in time-consumption with increment in scan area because the processor shares its resources with a number of programs running at the same time. This issue was addressed by using field programmable gate arrays (FPGA) that is a dedicated processing solution and used for high speed signal processing algorithms. For this purpose, we need an independent and flexible block of logic which can be used with continuously evolvable hardware based on FPGA. In this paper, we developed an FPGA-based ultrasonic propagation imaging system, where FPGA functions for both data acquisition system and real-time ultrasonic signal processing. The developed UPI system using FPGA board provides better cost-effectiveness and resolution than digitizers, and much faster signal processing time than CPU which was tested using basic ultrasonic propagation algorithms such as ultrasonic wave propagation imaging and multi-directional adjacent wave subtraction. Finally, a comparison of results for processing time between a CPU-based UPI system and the novel FPGA-based system were presented to justify the objective of this research.