• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.9-13
• /
• 2012

The present study has been carried out to diagnose the temperature safety of a boiler desuperheater which decreases abnormally higher temperature of superheated steam in a reheater of a power plant. The liquid water in the desuperheater stays in a closed space. It becomes heated by the high temperature superheated steam and boiling could occur. Boiling might increase internal pressure and it could destroy the desuperheater if the internal pressure exceeds the allowable pressure of the desuperheater. The present study modeled reasonably the desuperheater and four cases of heat transfer analysis are executed with the consideration of insulator and natural convective fluid flow of the inside cooling water. For the case excluded the natural convective fluid flow, the temperature exceeds the allowable temperature and pressure. On the other hand, for the real case included natural convective fluid flow and insulator, the active heat transfer from higher temperature region to lower temperature region occurs and it makes the temperature in the cooling water below the allowable temperature and pressure. From this fact, it could be thought that the desuperheater in the reheater is safe from destroy or back flow.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.51-56
• /
• 2009

Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.103-112
• /
• 2007

In this paper, we implement a hypervisor that runs multiple uC/OS-II real-time kernels on one microprocessor. The hypervisor virtualizes microprocessor and memory that are main resources managed by uC/OS-II kernel. Microprocessor is virtualized by controlling interrupts that uC/OS-II real-time kernel handles and memory is virtualized by partitioning physical memory. The hypervisor consists of three components: interrupt control routines that virtualize timer interrupt and software interrupt, a startup code that initializes the hypervisor and uC/OS-II kernels, and an API that provides communication between two kernels. The original uC/OS-II kernel needs to be modified slightly in source-code level to run on the hypervisor. We performed a real-time test and an independent computation test on Jupiter 32-bit EISC microprocessor and showed that the virtualized kernels run without problem. The result of our research can reduce the hardware cost, the system space and weight, and system power consumption when the hypervisor is applied in embedded applications that require many embedded microprocessors.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.325-331
• /
• 2013

The Baekje Gilt-bronze Incense Burner which was excavated in an ancient temple site in Neungsan-ri, within the City wall of Buyeo-Gun on 23rd December 1993, was a quintessence of the Bakje Arts that people could not have imagined until that time. The Baekje Gilt-bronze Incense Burner transcended 1400 years of time and space. The censer that finally came up to us delivered a kind of a powerful message to us. The power was so strong and mysterious that as if an ancestor who had been sleeping in the grave with a great silent had woken up and become alive to tell us something very precious. Baekje Gilt-bronze Incense Burner, unlike any other existing artifacts, might have a possibility that could provide an insight of the ancients' psych who once lived on our land. This kind of view from several archaeologists, therefore, made our hearts be filled with excitement and flutter. We call 21st century as an era of culture. This era requests that the culture needs to be ethnical but the culture also needs to go beyond that ethnic. In other words, a culture without an ethnic cannot exist, and a culture that puts an ethnic the very first before any other things cannot exist as well. Regaining our identities first and then embracing and harmonizing various cultures can be an wise way overcoming above problem. Hence, through this study, I intend to recognize characteristic of plasticity for Baekje Gilt-bronze Incense Burner, understand the world of Baekje people's spirit and thus provide an opportunity to shed new light on the Baekje Arts. By doing so, I would like to publicize a metal craft of Korea to the world. I also try to seek for an identity of Korea's craft culture which is receding and find a direction for the Korea's craft.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.106-112
• /
• 2001

Unfortunately, the area without economical efficiency, especially the far distance sea, is much lower than that of a urban area-built-up area. It should be promoted the equivalent level to a urban area in the light of future-oriented universal service. Actually, Because propagation environment of mobile communication in the sea is greatly different from that for inland focused on built-up area, a propagation prediction model in the sea should be distinguished from inland-based one. Accordingly, the purpose of this study is to suggest the propagation prediction model for the sea service as a method to minimize unnecessary facilities investment and maintenance caused by additional or new building of a base station. If mobile phone service for far distance sea is provided by expanding limited communication zone of narrow band CDMA mobile communication whose spread band FA is 1.2288MHz. Suggested propagation prediction model includes five parameters to minimize facilities investment of a base station and maximize channel capacity: equivalent line of sight, chip delay by PN code, antenna altitude, power of base station and gain of antennas. Finally, suggested propagation prediction model is simulated and, the results are examined for its utility by comparing with loss of free space.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.1
• /
• pp.299-306
• /
• 2018

As recent Jecheon and Milyang fire cases show, the need for fire disaster training to prepare for a fire disaster continues to grow. In the event of a disaster, people become mentally confused and are called disaster personalities. In order to survive in a disaster, it is necessary to develop the power to overcome the disaster personality by experiencing the disaster situation in advance. Therefore, training to overcome disaster personality is needed, and virtual reality can be a good training means in that it can experience without physical space. In addition, periodic actual disaster evacuation drills should be carried out to compensate for the shortcomings of virtual reality. In order to introduce fire disaster drill using virtual reality and to spread it to the public, the Korea National VR project should be introduced which benchmarked national PC project which succeeded in the past informatization project. Besides, the Korea National Safety Point system should be integrated to cover disaster preparedness training and building reinforcement. If the national VR project and the national safety point system are introduced successfully, Korea will be the basis for escaping the disgraceful nickname of 'disaster republic'.

• Journal of The Korean Association For Science Education
• /
• v.34 no.6
• /
• pp.549-558
• /
• 2014

Integrated concepts that are broad enough to embrace facts, principles, laws, and concepts of multiple disciplines could become the core of integrated education. Integrated concept-centered education enables effective and practical learning. In this study, the Delphi Method was implemented targeting experts in science (physics, life science, chemistry, and earth science) and humanities (history, geology, economics, ethics, and politics) to find out the integrated concept that can be used to design the concept-centered integrated education in the Republic of Korea. 124 experts participated in this survey. Delphi survey was conducted for three rounds. In the first round, an open questionnaire was given to experts to collect feasible integrated concepts in each major field. Then, in the second round experts were asked to select integrated concepts that could be used practically in the field of their major. In the third round, the integrated concept with selection frequency over medium value were given. They were asked to evaluate the applicability of integrated concepts by using the Likert-scale questionnaire. Through this process, content validity was analyzed. As a result, five integrated concepts (change, interaction, space-time, energy, and equilibrium) were selected for the inter-science integration. And thirteen integrated concepts (conflict, community, relationship, structure, power, diversity, culture, change, society, interaction, freedom, justice, and equality) were chosen for the inter-humanities integration. Finally, for the science-humanities integration, seven integrated concepts (structure, diversity, change, interaction, cycle, system, and environment) were determined.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.131-137
• /
• 2004

For the aim of thin electromagnetic wave absorbers used in mobile telecommunication frequency band (0.8-2.0㎓), we investigate high-frequency magnetic, dielectric and microwave absorbing properties of iron particles dispersed in rubber matrix in this study. The major experimental variables are particle shape (sphere and flake) and initial particle size (in the range 5-70 $\mu\textrm{m}$) of iron powders. High value of magnetic permeability and dielectric permittivity can be obtained in the composites containing thin plate-shape (flake) iron particles (of which thickness is less than skin depth in ㎓frequency), which can be produced by mechanical forging of spherical iron powders using an attrition mill. This result is attributed to the reduction of eddy current loss (increase of permeability) and the increase of space charge polarization (increase of permeability). The optimum initial particle size is found to be about 10 $\mu\textrm{m}$ for the attainment of the material parameters (particularly, real part of complex permeability) satisfying the wave impedance matching. With the iron powders controlled in size and shape as absorbent fillers in rubber matrix, the thickness can be reduced to about 0.7mm with respect to -5㏈ reflection loss (70% power absorption) in mobile telecommunication frequency band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.950-957
• /
• 2012

In this paper, a small round-ended slot loaded by double ridges on the broad wall of a rectangular waveguide is presented as an element for a waveguide slot-array antenna(WSAA). By properly adjusting the ridge dimension, a resonance of the slot at a desired frequency can be achieved. The resonant length of the proposed slot is about $0.26{\lambda}_0$(free space wave length) at the resonance frequency. The proposed resonant slot has some advantageous properties, such as small size, small resonant conductance, and short and stable resonant slot length. In addition, the characteristics of the slots are slightly affected by the adjacent elements when the slots are arrayed for a waveguide slot antenna. A $4{\times}1$ WSAA with -20 dB side-lobe level(SLL) is designed, fabricated, and tested experimentally. The measured results are well agreed with the simulated ones and have an SLL of -15.9 dB and a half-power beam width of $110.2^{\circ}$ in the E-plane and $21.2^{\circ}$ in the H-plane, respectively, at 9.41 GHz.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.5
• /
• pp.94-107
• /
• 2008

This study examines the diversity of garden culture in the Joseon Dynasty focusing on genre painting. Genre painting gives us insight into the various ways of enjoying the garden. The intimate activities portrayed in the painting show us about the vivid scenes of Korean garden at that time. Among the various meanings of gardens, sensual pleasure is focused on here. The garden has always been a place of pleasure for seeing, smelling, touching, meeting people and erotic flirting. Here, the oriental aesthetic idea of Pungryu is adopted to reformulate pleasure based on the traditional way of thought. Most Korean gardens in the Joseon Dynasty were understood as the place for Pungryu. Sensuality in the Korean garden associated with a high level of spiritual pleasure. In order to look closely into garden activities, genre paintings were selected and analyzed. Several characteristics were elicited. First, the garden was understood as the medium of communication through reconciling man with nature. Mediating man with nature often calls for uplifting the sense of community within groups of people. Second, the garden was featured as the place of cultural creation. Many scholars utilized the garden as a place for poetic imagination. Therefore, the garden was the locus of intellectual discourse. Third, personal retreat was one of important functions in the Korean garden. the humble attitude toward landscape such as solitude and mediation might be understood as one way of enjoying the nature. Fourth, taste, power and social relations were embedded in garden culture. Therefore, the garden was regarded as a space of distinction. Garden making was understood as one of the high class leisure activity. It was quite natural that the garden was used as a place of showing up their taste and culture. Finally, we need to reinvigorate the rich meanings of garden in contemporary practices. In-depth analysis of garden culture through the lens of genre painting gives us quite useful information in Korean garden culture.