• 천문학회보
• /
• 제43권1호
• /
• pp.61.3-61.3
• /
• 2018

To understand the assembly of the galaxy population in clusters today, it is important to first understand the impact of previous environments prior to cluster infall, namely preprocessing. We use 15 cluster samples from hydrodynamic zoom-in simulation YZiCS to determine the significance of preprocessing focusing primarily on the tidal mass loss of dark matter halos. We find ~48% of the cluster member halos were once satellites of another host. The preprocessed fraction is not a clear function of cluster mass. Instead, we find it is related to each individual cluster's recent mass growth history. We find that the total mass loss is a clear function of time spent in a host. However, two factors can considerably increase the mass loss rate. First, if the satellite mass is approaching the mass of its host. Second, when the halo suffers tidal mass loss at a higher redshift. The preprocessing provides an opportunity for halos to experience tidal mass loss for a more extended period of time than would be possible if they simply fell directly into the cluster, and at earlier epochs when hosts were more destructive to their satellites.

• 대한가정학회지
• /
• 제25권4호
• /
• pp.9-18
• /
• 1987

This study is conducted to investigate the influence of addition of quarternary ammonium salt(cetyl trimethyl ammonium bromide: CTAB) when polyester(PET) fabric is treated with sodium hydroxide(NaOH), depending on experimental variables such as CTAB concentration, NaOH concentration, time & temperature, and the change in physical & chemical properties of alkaline-hydrolyzed PET fabrics depending on their weight loss. The results are as follows: 1. By adding CTAB in aqueous NaOH, the weight loss of PET fabric is increased remarkably and until the concentration of CTAB is reached at its cmc, and the higher the concentration of CTAB are, the more weight loss on PET fibrics are. 2. The addition of CTAB in aqueous NaOH is most effective at lower NaON concentration(2%) among various NaOH concentration, on increasing the amount of weight loss, while there are almost similar results through various treatment time and temperature. 3. As the amount of weight of weight loss on PET fabric is increased, the increase of void space in the PET yarn, of softness & dyeability of PET fabric and the decrease of tensile strength are found. On the other hand, the moisture regain shows a little increase by alkaline-hydrolysis on PET fabric while vertical absorption test & water retention value are not sufficiently sensitive to distinguish between the hydrophillicity of untreated and treated PET fabric. The shrinkage of PET fabric is induced by swelling in hot aqueous NaOH regardless of NaOH concentration & addition of CTAB.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.621-631
• /
• 2011

In space qualified DC-DC converters, optimization of the following electrical characteristics is of greater interest in comparison with other specifications; power loss/efficiency, output voltage ripple and volume/weight. The main goal of this paper is to present an appropriate solution for optimizing the above mentioned characteristics. For this purpose, a comprehensive power loss model of a DC-DC converter is fully developed. Proper models are also demonstrated for assessment of the output voltage ripple and the utilized transformer volume as the bulkiest component in a DC-DC converter. In order to provide a test bed for evaluation of the proposed models, a 50W push-pull DC-DC converter is designed and implemented. Finally, a novel cost function with three assigned weight functions is proposed in order to have a trade-off among the power loss, the output voltage ripple and the utilized transformer volume of the converter. The cost function is optimized for applications in which volume has the highest priority in comparison with power loss and ripple. The optimization results show that the transformer volume can be decreased by up to 51% and this result is verified by experimental results. The developed models and algorithms in this paper can be used for other DC-DC converter topologies with some minor modifications.

• ETRI Journal
• /
• 제43권3호
• /
• pp.377-388
• /
• 2021

Owing to the difficulties associated with conducting millimeter-wave (mmWave) field measurements, especially in high-speed train (HST) environments, most propagation channels for mmWave HST have been studied using methods based on simulation rather than measurement. In this study, considering a linear cell layout in which base stations are installed along a railway, measurements were performed at 28 GHz with a speed up to 170 km/h in two prevalent HST scenarios: viaduct and tunnel scenarios. By observing the channel impulse responses, we could identify single- and double-bounced multipath components (MPCs) caused by railway static structures such as overhead line equipment. These MPCs affect the delay spread and Doppler characteristics significantly. Moreover, we observed distinct path loss behaviors for the two scenarios, although both are considered line-of-sight (LoS) scenarios. In the tunnel scenario, the path loss exponent (PLE) is 1.3 owing to the waveguide effect, which indicates that the path loss is almost constant with respect to distance. However, the LoS PLE in the viaduct scenario is 2.46, which is slightly higher than the free-space loss.

• 한국정보통신학회논문지
• /
• 제19권2호
• /
• pp.272-278
• /
• 2015

본 논문은 ISM (Industry Science and Medical) 대역에서 동시 다발적으로 운용 가능성이 높은 무선 헤드셋 수신기 시스템과 WiFi (Wireless Fidelity) 시스템간의 간섭 영향을 분석하였다. WiFi는 IEEE (Institute of Electrical and Electronic Engineers ) 802.11b 규격을 바탕으로 하여 특성 및 파라미터를 적용하였으며, 분석방법으로는 최소결합 손실(MCL; Minimum Coupling Loss) 방법과 몬테카를로(MC; Monte Carlo) 방법을 사용하였다. MCL 방법을 통해서 무선 헤드셋의 수신기와 WiFi기기의 송신기 간의 보호이격거리를 도출하였으며, 통계적 분석을 바탕으로 한 MC 방법을 이용해서 5 %이하의 간섭 확률을 만족시켜 주기 위한 단일 간섭원에 따른 보호이격거리 도출 및 희생원의 셀 반경에 따른 허용 가능한 최대 간섭원 수를 도출하였다. 분석 결과는 ISM 대역에서 사용되고 있는 무선 헤드셋 시스템 및 기타 소출력 기기들의 공유방안으로 활용될 것으로 기대된다.

• Composites Research
• /
• 제31권3호
• /
• pp.83-87
• /
• 2018

An object in the Low Earth Orbit (LEO) is affected by many environmental conditions unlike earth's surface such as, Atomic oxygen (AO), Ultraviolet Radiation (UV), thermal cycling, High Vacuum and Micrometeoroids and Orbital Debris (MMOD) impacts. The effect of all these parameters have to be carefully considered when designing a space structure, as it could be very critical for a space mission. Polybenzimidazole (PBI) is a high performance thermoplastic polymer that could be a suitable material for space missions because of its excellent resistance to these environmental factors. A thin coating of PBI polymer on the carbon epoxy composite laminate (referred as CFRP) was found to improve the energy absorption capability of the laminate in event of a hypervelocity impact. However, the overall efficiency of the shield also depends on other factors like placement and orientation of the laminates, standoff distances and the number of shielding layers. This paper studies the effectiveness of using a PBI coating on the front bumper in a multi-shock shield design for enhanced hypervelocity impact resistance. A thin PBI coating of 43 micron was observed to improve the shielding efficiency of the CFRP laminate by 22.06% when exposed to LEO environment conditions in a simulation chamber. To study the effectiveness of PBI coating in a hypervelocity impact situation, experiments were conducted on the CFRP and the PBI coated CFRP laminates with projectile velocities between 2.2 to 3.2 km/s. It was observed that the mass loss of the CFRP laminates decreased 7% when coated by a thin layer of PBI. However, the study of mass loss and damage area on a witness plate showed CFRP case to have better shielding efficiency than PBI coated CFRP laminate case. Therefore, it is recommended that PBI coating on the front bumper is not so effective in improving the overall hypervelocity impact resistance of the space structure.

• Journal of Astronomy and Space Sciences
• /
• 제23권3호
• /
• pp.189-198
• /
• 2006

BVRI CCD 측광 관측에 의하여 질량비가 작은 접촉쌍성 HN UMa와 II UMa의 새로운 광도곡선을 얻었다. 새로운 광도곡선과 이미 발표된 분광관측으로부터 Wilson-Devinney 프로그램을 이용하여 이 두 별의 궤도요소와 절대 물리량을 얻었다. HN UMa와 II UMa를 포함한 절대물리량이 잘 알려진 21개의 질량비가 작은 접촉쌍성들의 진화 상태를 조사하였다. 그 결과 질랑비가 작은 접촉쌍성의 반성은 영년주계열 아래 놓이며, 이러한 현상은 질량이 작은 접촉쌍성의 반성에서의 질량손실을 가정할 경우, 비록 작의 양의 질량이지만 반성에서의 질량 감소는 상대적으로 광도의 감소가 현저히 작아지기 때문일 것으로 예상된다.

• 한국통신학회논문지
• /
• 제36권11B호
• /
• pp.1422-1432
• /
• 2011

무선 네트워크가 요즘 들어 기술적인 도약을 이루면서 그 적용범위나 역할이 중요해지고 있다. 국방 분야에서도 무선 네트워크를 도입하여 유선의 한계를 극복하고 개선하려는 움직임도 적지 않으며 특히 현재 해군 함정 내부에서의 대부분의 통신을 유선을 이용하기 때문에 복잡하고 비효율적이다. 본 논문에서는 함정 내 무선 네트워크 구축을 위해서 일반적인 실내 전파환경과는 많은 차이점을 가지는 함정 내 격실 및 복도에 대해 전파 환경 측정실험을 실시하고 모델링을 하였다. 함체 전체가 철 구조물로 이뤄진 특수 환경인 함정 내에서 2.4GHz 대역의 주파수에 대한 CW 측정을 통해 전파환경 특성을 분석하고 함정 내부공간에 대한 전파 경로 손실 모델을 제시하며, 전파 추적 시뮬레이션 기법을 통해 측정 결과와 비교 분석하였다. 더욱이, 기존에 연구되었던 실내 전파환경에 대한 전파 경로손실 모텔과 비교 분석하여 차이점을 도출하여 함정 내 무선 네트워크의 활용방안에 대해 고찰하였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권11호
• /
• pp.971-983
• /
• 2007

셀룰러 유전알고리즘(CGAs)은 모집단이 특정한 위상 구조를 갖는 유전알고리즘의 일종이다. 보통의 경우, CGAs의 모집단 공간은 네트워크 이론 측면에서 상대적으로 긴 평균경로길이와 큰 클러스터링계수를 갖는 정규 격자형 위상 구조이다. 평균경로길이가 길면 멀리 떨어진 개체들 사이의 유전적 상호작용이 느리게 일어난다. 따라서 클러스터링계수를 유지하면서 평균경로길이를 줄인다면 개체의 다양성이 유지되면서도 모집단이 보다 빠르게 수렴할 것이다. 이 논문에서는 최소좁은세상 셀룰러 유전알고리즘(SSWCGAs)을 제안한다. SSWCGAs에서 각 개체는 클러스터링이 잘되었으면서도 노드를 연결하는 평균경로길이가 짧은 모집단에 거주하여, 클러스터링에 의한 세부탐색 능력을 유지하면서도 전역탐색을 잘하게 된다. 네 가지 실변수 함수와 두 가지 GA-hard 문제에 대한 실험을 통하여 SSWCGAs가 SGAs 및 CGAs보다 효과적임을 보였다.

• 대한소아치과학회지
• /
• 제51권1호
• /
• pp.99-108
• /
• 2024

Early loss of the primary maxillary second molar can lead to complications in which mesial drift of the adjacent first molar (M1) can disturb eruption of the succedaneous second premolar (P2). This study reports two cases of space loss for P2 caused by early exfoliation of its predecessor. After the eruption of the first premolar, the Jones jig appliance was used to distalize M1 and regain space for the eruption of P2. The appliance was further utilized to align the palatally erupted P2 into the dental arch. In both cases, the space and corrected position of P2 were well maintained. Early exfoliation of the primary second molar caused by mesial encroachment of M1 is a common phenomenon, and pediatric dentists should attend to this during routine examinations. An appropriate intervention should be initiated when the primary second molar is lost during the mixed dentition period. If used with careful anchorage control, the Jones jig appliance can effectively resolve this problem.