• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.251-256
• /
• 2017

The electric coupling between the lithosphere and the ionosphere is examined. The electric field is considered as a timevarying irregular vertical Coulomb field presumably produced on the Earth's surface before an earthquake within its epicentral zone by some micro-processes in the lithosphere. It is shown that the Fourier component of this electric field with a frequency of 500 Hz and a horizontal scale-size of 100 km produces in the nighttime ionosphere of high and middle latitudes a transverse electric field with a magnitude of ~20 mV/m if the peak value of the amplitude of this Fourier component is just 30 V/m. The time-varying vertical Coulomb field with a frequency of 500 Hz penetrates from the ground into the ionosphere by a factor of ${\sim}7{\times}10^5$ more efficient than a time independent vertical electrostatic field of the same scale size. The transverse electric field with amplitude of 20 mV/m will cause perturbations in the nighttime F region electron density through heating the F region plasma resulting in a reduction of the downward plasma flux from the protonosphere and an excitation of acoustic gravity waves.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.13 no.3
• /
• pp.15-24
• /
• 2007

The concept of modern medical science has been changing from the old period which is simple treatment of diseases to the new period which is active prevention from diseases. Because preventing diseases is more effective and economical than treating diseases. This is the reason that needs to HPC at the concept of Health diagnosis. Another reason of HPC is to diagnose the stresses and to prescribe an effective exercise and to show the way of nutrition intake in order to keep up the condition of individual health. According to these reasons, I foresee the demand of remodelling HPC from existing HEC on this study. I define the common space that HEC uses duplication with HPC. I also aim to analyze them and to examine the alterable function and proper size of common space in case of remodelling.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1815-1817
• /
• 2000

Plasma display Panels(PDPs) are one of the leading technologies currently under development for large-area high-brightness flat panel displays. However, the luminance and luminous efficiency of at PDPs should be improved. Especially, one of the main factors affecting on the luminance and luminous efficiency of ac PDP may be the phosphor thickness and size of discharge space. In this study, we examined into addressing time, electrical and optical properties as a parameter of the phosphor thickness and the size of discharge space during the display period of ac PDP. It is found out that the optimum phosphor thickness was $50{\mu}m$ and height of discharge space was about $100{\mu}m$.

• Journal of architectural history
• /
• v.20 no.6
• /
• pp.41-56
• /
• 2011

This study mainly examined the unit space (room) called 'MARI' of the private houses that were built between the 19c and the early 20c in the insular areas of southwestern sea. Generally, this region has unique historicity (restructure of the insular environment in the 17c and the 18c) and geographic environment that are different from inland regions thus the environment is presumed as a related factor to developments and structures of the private houses. 'MARI' is a noticeable space that is installed in a main building without an exception even in small 3 bedroom private houses. Its nature has location and usage distinctions in an architectural plan with similar 'MARU' of inland Jeollanam-Do. There are large crocks filled with grains at MARI. Thus, MARI is a storage room. Mostly rice and various other kinds of grains are stored in the several crocks, large and small. Many household goods are kept here as well. Another peculiar function of MARI is that this space commonly enshrines ancestral tablets of three generations. Hence, MARI takes a role of a shrine of an aristocratic house from an inland region. Considering the size of the house and space, this seems to be a very unprecedented utilization of area. MARI is located at the top (at the head of the house) on the floor plan. In other words, it is located at the space in the highest rank. The importance of ancestor worship and grains is evinced architecturally. It is really interesting fact that MARI is also located within recently built modern houses (Cheongsan Island, Joyak Island, etc.). Therefore, it can be said that the unique MARI tradition of this region has an intact continuity even today. After all, MARI has a great significance as a unique unit space of insular areas of southwestern sea that is installed in the main buildings of all houses regardless of size and shape of the houses, and their insular locations.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.337-341
• /
• 2008

This paper presents a vibrotactile space mouse which use pin-type vibrotactile display modules and a gyroscope chip. This mouse is a new interface device which is not only an input device as an ordinary space mouse but also a tactile output device. It consists of a space mouse which use gyroscope chip and vibrotactile display modules which have been developed in our own laboratory. Lately, by development of vibrotactile display modules which have small size and consume low power, vibrotactile displays are available in small sized embedded systems such as wireless mouses or mobile devices. Also, development of new sensors like miniature size gyroscope by MEMS technology enables manufacturing of a small space mouse which can be used in the air not in a plane. The vibrotactile space mouse proposed in this paper recognizes motion of a hand using the gyroscope chip and transmits the data to PC through Bluetooth. PC application receives the data and moves pointer. Also, 2 by 3 arrays of pin-type vibrotactile actuators are mounted on the front side of the mouse where fingers of a user's hand contact, and those actuators could be used to represent various information such as gray-scale of an image or Braille patterns for visually impared persons.

• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.126-132
• /
• 2008

The bin packing problem (BPP) is an NP-Complete Problem. The problem can be described as there are $N=\{1,2,{\cdots},n\}$ which is a set of item indices and $L=\{s1,s2,{\cdots},sn\}$ be a set of item sizes sj, where $0<sj{\leq}1$, ${\forall}j{\in}N$. The objective is to minimize the number of bins used for packing items in N into a bin such that the total size of items in a bin does not exceed the bin capacity. Assume that the bins have capacity equal to one. In the past, many researchers put on effort to find the heuristic algorithms instead of solving the problem to optimality. Then, the quality of solution may be measured by the asymptotic worst-case ratio or the average-case ratio. The First Fit Decreasing (FFD) is one of the algorithms that its asymptotic worst-case ratio equals to 11/9. Many researchers prove the asymptotic worst-case ratio by using the weighting function and the proof is in a lengthy format. In this study, we found an easier way to prove that the asymptotic worst-case ratio of the First Fit Decreasing (FFD) is not more than 11/9. The proof comes from two ideas which are the occupied space in a bin is more than the size of the item and the occupied space in the optimal solution is less than occupied space in the FFD solution. The occupied space is later called the weighting function. The objective is to determine the maximum occupied space of the heuristics by using integer programming. The maximum value is the key to the asymptotic worst-case ratio.

• Korean Journal of Optics and Photonics
• /
• v.24 no.3
• /
• pp.111-119
• /
• 2013

A large aspheric mirror is a key component for large astronomical telescopes and high resolution satellite cameras. Since it is large and has an aspheric form, it is much more difficult to fabricate it compared to the similar size of spherical mirror. Especially, the opto-mechanical design and analysis is critical to reduce the deformation of mirror surface due to the external forces such as gravity or temperature change, as the mirror size is larger and lightweighting ratio is increased. The design requirements for the mirror are different depending on the particular ground and space applications because the environmental conditions are changed. In this paper, we explain the opto-mechanical design and analysis for ground and space applications that are among the most difficult to achieve among several technologies related to development of the large aspheric mirror.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.23-34
• /
• 2012

There is a demand for a complex cultural space of play, leisure and education, a kids cafe, which will replace a playground just for kids as awareness for the need of a space where parents can spend leisure time with their own children and can take a rest grows, Thus, this study aims to find features for user satisfying kids cafes by conducting observations of the kids cafes and user survey. This study selected 12 kids cafes, 3 kids cafes per type (play focused, cafe or restaurant focused, education focused, multipurpose focused), in Seoul which were built after 2007 and conducted surveys on space planning and spatial characteristics by users and types and the level of satisfaction. As a result, the play focused kids cafes are used the most and the multipurpose focused kids cafes are used the second most. So the reason for using kids cafes is for the play of children. Also the overall satisfaction level for kid cafes were above the average except for the price. The result of this study showed that there was differences of satisfaction based on the type of user satisfaction, size of children space, finishes, colors, furniture and accessories, sanitary conditions. For the overall satisfaction, users were satisfied with the interior space, however, users were unsatisfied with functional parts, such as toys, foods and educational program. The results of the analysis showed that based on the types of the kids cafes, users' satisfaction rate for space size for the children, finishes, colors, furniture and accessories, sanitary conditions were different and for the functional parts, the satisfaction rate was different in all aspects. Also, in overall, the educational focused type users showed higher satisfaction rate than other users. Finally, the level of satisfaction is different by type of kids cafes and we have to consider the level of satisfaction of the users in order to plan kids cafes which meet the demand of the users.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.138.2-138.2
• /
• 2012

Cave on the Moon is considered as the most appropriate place for human to live during the frontier lunar exploration. While the lava flows, the outer crust gets cooled and solidified. Then, the empty space is remained inside after lava flow stops. Such empty space is called the lava caves. Those lava tubes on the Earth are formed mostly by volcanic activity. However, the lava tubes on satellite like Moon and planet like Mars without volcanic activity are mostly formed by the lava flow inside of the crater made by large meteorite impact. Some part of lava tube with collapsed ceiling appears as the entrance of the cave. Such area looks like a deep crater so called a pit crater. Four large pit craters with diameter of > 60 m and depth of > 40 m are found without difficulty from Kaguya and LRO mission image archives. However, those are too deep to use as easily accessible human frontier base. Therefore, now we are going to identify some smaller lunar caves with accessible entrances using LRO camera images of 0.5 m/pixel resolution. Earth's lava caves and their entrances are well photographed by surface and aerial camera in immense volume. Thus, if the image data are sorted and archived well, those images can be used in comparison with the less distinct lunar cave and entrance images due to its smaller size. Then, we can identify the regions on the Moon where there exist caves with accessible entrances. The database will be also useful in modeling geomorphology for lunar and Martian caves for future artificial intelligence investigation of the caves in any size.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.109-116
• /
• 2015

This paper is concerned with the single vendor single buyer integrated production inventory problem. To make this problem more practical, space restriction and lead time proportional to lot size are considered. Since the space for the inventory is limited in most practical inventory system, the space restriction for the inventory of a vendor and a buyer is considered. As product's quantity to be manufactured by the vendor is increased, the lead time for the order is usually increased. Therefore, lead time for the product is proportional to the order quantity by the buyer. Demand is assumed to be stochastic and the continuous review inventory policy is used by the buyer. If the buyer places an order, then the vendor will start to manufacture products and the products will be transferred to the buyer with equal shipments many times. The mathematical formulation with space restriction for the inventory of a vendor and a buyer is suggested in this paper. This problem is constrained nonlinear integer programming problem. Order quantity, reorder points for the buyer, and the number of shipments are required to be determined. A Lagrangian relaxation approach, a popular solution method for constrained problem, is developed to find lower bound of this problem. Since a Lagrangian relaxation approach cannot guarantee the feasible solution, the solution method based on the Lagrangian relaxation approach is proposed to provide with a good feasible solution. Total costs by the proposed method are pretty close to those by the Lagrangian relaxation approach. Sensitivity analysis for space restriction for the vendor and the buyer is done to figure out the relationships between parameters.