• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.50-63
• /
• 2015

Explosive bolts are one of pyrotechnic release devices, which are highly reliable and efficient for a built-in release. Among them, ridge-cut explosive bolts which utilize shock wave generated by detonation to separate bolt body produce minimal fragments, little swelling and clean breaks. In this study, separation phenomena of ridge-cut explosive bolts or ridge-cut mechanism are computationally analyzed using Hydrocodes. To analyze separation mechanism of ridge-cut explosive bolts, fluid-structure interactions with complex material modeling are essential. For modeling of high explosives (RDX and PETN), Euler elements with Jones-Wilkins-Lee E.O.S. are utilized. For Lagrange elements of bolt body structures, shock E.O.S., Johnson-Cook strength model, and principal stress failure criteria are used. From the computational analysis of the author's explosive bolt model, computational analysis framework is verified and perfected with tuned failure criteria. Practical design improvements are also suggested based on a parametric study. Some design parameters, such as explosive weights, ridge angle, and ridge position, are chosen that might affect the separation reliability; and analysis is carried out for several designs. The results of this study provide useful information to avoid unnecessary separation experiments related with design parameters.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.111-120
• /
• 2008

A particle image velocimetry (PIV) technique was employed to investigate the effects of blowing jet on the flow characteristics over stationary and pitch-oscillating airfoils. The Reynolds number was $7.84{\times}10^5$ based on the chord length. It was found that for stationary airfoil cases, continuous and pulsating blowing jets successfully reduced separated wake region at high angles of attack. A comparison study of two different types of jet blowing indicated that pulsating jet is more effective than continuous jet for flow separation control. Pulsating leading-edge blowing postpones flow separation and increased stall angle of attack by $2^{\circ}{\sim}3^{\circ}$. For pitch-oscillating airfoil cases, the PIV results showed that blowing jet efficiently delays the separation onset point during pitch-up stroke, whereas it does not prevent flow separation during pitch-down stroke, even at angles of attack smaller than static ones.

• 한국한의학연구원논문집
• /
• 제9권2호
• /
• pp.17-27
• /
• 2003

Eumyang-ohaeng[陰陽五行-Eumyang and five phases], as a standing rule that establishes the theory of Oriental medicine and origin of the oriental philosophy, it provides the perspective of the oriental medicine's outlook of the world. Without knowing the Eumyang-ohaeng, we cannot discuss Oriental medicine, nor can we understand the oriental way of thinking. Time and Space is what the human being created in order to explain the existence and change of matters. There is a common denominator between this universal concept of time and space and the theory of Eumyang-ohaeng. Consequently this paper investigates how characteristics of Eumyang-ohaeng and that of time and space matches Eumyang represents all matter and its characteristic, by comparison with each other space, and Ohaeng shows the change of matter with time gradually and sequancely. But this separation is only a separation by words, they really melt into one like two sides of a coin is actually just one coin. After all the theory of Eumyang-ohaeng is a theory that leads us to realize time and space, matter and power are all just one. So consequently, despite the difference in mass or size or longevity of matters, Eumyang-ohaeng pulls all matter into one body. It's why Eumyang-ohaeng is defined as the unified theory of time and space.

• 호남수학학술지
• /
• 제35권4호
• /
• pp.707-716
• /
• 2013

The present paper consists of two parts. Since the recent paper [4] proved that an Alexandroff $T_0$-space is a semi-$T_{\frac{1}{2}}$-space, the first part studies semi-open and semi-closed structures of the Khalimsky nD space. The second one focuses on the study of a relation between the LS-property of ($SC^{n_1,l_1}_{k_1}{\times}SC^{n_2,l_2}_{k_2}$, k) relative to the simple closed $k_i$-curves $SC^{n_i,l_i}_{k_i}$, $i{\in}\{1,2\}$ and its normal k-adjacency. In addition, the present paper points out that the main theorems of Boxer and Karaca's paper [3] such as Theorems 4.4 and 4.7 of [3] cannot be new assertions. Indeed, instead they should be attributed to Theorems 4.3 and 4.5, and Example 4.6 of [10].

• 한국항공우주학회지
• /
• 제32권1호
• /
• pp.58-64
• /
• 2004

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.84-93
• /
• 2001

The aim of this study is to provide fundamental informations that make it possible to use a cool stream and a hot stream simultaneously. We changed the pressure of compressed air that flows into a tube, the inner diameter of orifice that a cold stream exits, and the mass flow rate ratio. And in each case, we measured the temperature of a cold stream and a hot stream in each exit of a tube. Also we measured the axial temperature distribution and the radial temperature distribution in internal space of a tube. From the study, following conclusive remarks can be made. Average flow rate that flows into a tube is in proportion to square root of inlet pressure. As inlet pressure increases axial and radial temperature distribution in the inner space of vortex-tube increase. As mass flow rate ratio change, separation point moves.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.107-113
• /
• 2008

program package for store separation analysis, SAFESEP, has been developed. The package includes CTS system software, 3-Dimensional visualization software, off-line store trajectory software and aerodynamic database software. In this paper, we describe the functions and the capabilities of the store separation analysis program package.

• Journal of Astronomy and Space Sciences
• /
• 제40권3호
• /
• pp.123-129
• /
• 2023

This paper presents an analysis of the trans-lunar trajectory insertion performance of the Korea Pathfinder Lunar Orbiter (KPLO), the first lunar exploration spacecraft of the Republic of Korea. The successful launch conducted on August 4, 2022 (UTC), utilized the SpaceX Falcon 9 rocket from Cape Canaveral Space Force Station. The trans-lunar trajectory insertion performance plays a crucial role in ensuring the overall mission success by directly influencing the spacecraft's onboard fuel consumption. Following separation from the launch vehicle (LV), a comprehensive analysis of the trajectory insertion performance was performed by the KPLO flight dynamics (FD) team. Both orbit parameter message (OPM) and orbit determination (OD) solutions were employed using deep space network (DSN) tracking measurements. As a result, the KPLO was accurately inserted into the ballistic lunar transfer (BLT) trajectory, satisfying all separation requirements at the target interface point (TIP), including launch injection energy per unit mass (C3), right ascension of the injection orbit apoapsis vector (RAV), and declination of the injection orbit apoapsis vector (DAV). The precise BLT trajectory insertion facilitated the smoother operation of the KPLO's remainder mission phase and enabled the utilization of reserved fuel, consequently significantly enhancing the possibilities of an extended mission.

• 한국항공우주학회지
• /
• 제33권9호
• /
• pp.1-8
• /
• 2005

이차원 타원형 날개꼴에서 펄스제트 브로잉에 의한 박리 제어 효과에 대하여 연구하였다. 박리 유동의 능동제어기술 개발을 위하여 압축공기를 사용하는 연속제트/간헐제트 엑츄에이터를 설계제작하여 타원형 날개 풍동 실험 모델에 장착하였다. 아음속 유동에서 날개 주위 유동장의 PIV 측정과 유동의 가시화을 통하여 간헐제트 브로잉의 타원형 날개의 실속제어 효과와 실용성에 대해 실험연구를 수행하였다. PIV 실험 결과 제트 브로잉에 의해 난류 후류 영역과 박리 버블의 크기를 현저하게 감소시킴으로써 박리제어가 가능함을 보였다. 간헐제트는 연속제트보다 박리제어에 보다 효과적이었다. 간헐제트의 주파수를 증가시키면 보다 높은 받음각에 이르기까지 난류 박리 후류를 효과적으로 억제할 수 있었다.

• 한국항공우주학회지
• /
• 제47권9호
• /
• pp.617-628
• /
• 2019

벤트홀로 연결된 두 개의 가변 체적 챔버를 가지고 있는 파이로테크닉 분리 너트는 복잡한 과정을 통해 분리를 수행하므로 많은 설계 인자를 가지고 있다. 접촉부의 각도, 구성품의 질량, 누름봉 돌출부 안쪽 지름, 환형 챔버의 초기 부피, 확장 챔버의 초기 부피, 화약질량, 벤트홀 지름과 같은 설계 인자들의 변화에 따라 분리 너트의 성능이 어떻게 달라지는지를 파악하면 설계 개선 방향을 결정하는데 도움이 될 수 있다. 이에, 선행 연구를 통해 개발한 파이로테크닉 분리 너트 거동 예측 모델을 이용하여 매개변수 연구를 수행하였다. 다른 설계 인자의 값은 고정한 상태에서 한 설계인자의 값을 독립적으로 변화시키며 분리 시간이 어떻게 달라지는지, 변화의 원인이 무엇인지를 분석하였다.