• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.50-58
• /
• 2009

Periodic variation of local paper structure was evaluated using two-dimensional fast Fourier transform (FFT) and spectral analysis. Since the periodic variation could originate from various sources and have different magnitudes and patterns depending on the origins, a complete analysis of local paper structure properties such as local grammage, local thickness, local apparent density and surface topography was proposed in this study. For a commercial copy paper, the individual periodic patterns for each local structural property were identified by using inverse FFT spectrums of the filtered spectrum. The spectral analysis of newsprint sample provided the period of variation quantitatively, which was useful in comparing the origins of the individual periodic patterns of the local structural properties.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.626-630
• /
• 2006

This study investigates the effects of Interaural Cross-correlation(IACC) and its variation on annoyance of the heavy-weight impact sounds. Subjects evaluated the annoyance of the heavy-weight floor impact sounds recorded in rooms of apartments which have different sound insulation treatments; furnished and occupied conditions are characterized by the ACF/IACF factors. A paired comparison test was conducted using the impact sound sources whose IACC and variation of IACC values were different. It was found that IACC is inversely correlated with the scale value(r=-0.62) whereas the variation of IACC is not(r=-0.34). On the contrary, ${\Phi}(0)$ is highly correlated with scale value of annoyance and ${\Phi}(0)$ is need to be controlled as constant to find the effect of IACC on annoyance.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2071-2075
• /
• 2003

Pressure variation is one of the major sources on noise emission in the oil hydraulic piston pumps. Therefore, it is necessary to clarify about pressure variation characteristics of the oil hydraulic piston pumps to reduce noise. Pressure variations in a cylinder at trapping region were measured during pump working period with discharge pressures, rotational speeds. The effect of pre-compression of the discharge port with three types valve plates also investigated. It was found that the pressure variation characteristics of oil hydraulic piston pumps deeply related with pre-compression design of the discharge port. Also, it was found that the pressure overshoot at trapping region can reduce by use of pre-compression at the end of the discharge port in valve plate

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.33-38
• /
• 1999

To investigate the image-forming property of optical system having Gaussian amplitude for polychromatic source, we calculated the chromaticity variation and the illuminance distribution. Considered polychromatic sources in this paper are A light which is on incandescent-tungsten lamp, C light which is a daylight, and $D_{65}$ light which is a extend daylight to the near ultraviolet. The polychromatic sources represent the different chromaticity values at a geometrical image point. The chromaticity variation of optical system having a Gaussian amplitude is smaller than that having an uniform amplitude. The illuminance distributions for polychromatic sources present nearly the same values, and the depth of focus for optical system having a Gaussian amplitude is wider than that having an uniform amplitude. From these results, we know that the depth of focus increases and the chromaticity variation decreases, when the incident light amplitude is modulated from an uniform amplitude to a Gaussian amplitude.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.686-692
• /
• 2010

This study described the general pattern of genetic variation among ten teak (Tectona grandis Linn. f.) provenances in Myanmar and determined the most suitable seed sources for the plantation program in Bago Yoma region. Seeds of ten provenances were collected to cover the whole teak natural distribution in Myanmar and planted at four trial sites in Bago Yoma region in 1998. Seven years after planting, variation was assessed for growth, morphological characteristics and their correlation with geoclimatic factors. Statistical analysis using ANOVA revealed that there were significant differences in most of the traits measured among provenances, trial sites and provenance ${\times}$ site interaction at five percent level. A positive significant correlation (p<0.01) was found among most of the traits. The regression analyses between all traits and geoclimatic factors indicated the existence of ecoclinal variation in teak. Most of the traits were negatively correlated with the latitude while a positive significant correlation was found between longitude and C/B ratio, crown-diameter, average branch angle and leaf-remain. There was no significant correlation between the mean temperature and any other traits in this study. Furthermore, growth traits and crown diameter were positively correlated with the mean annual rainfall while negative correlation was found between the geographical distance and growth traits. Results indicate that the latitudinal pattern of teak genetic variations in growth performance was attributed to the limit of mean annual rainfall. Comparative assessment showed that local provenances were generally the best and could be use as suitable seed sources for the plantation program in the Bago Yoma region.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.975-982
• /
• 2005

The purpose of the Gage R&R study is to determine whether a measurement system is adequate for monitoring a process. If the measurement system variation is small relative to the process variation, then the measurement system is deemed 'adequate'. The sources of variation associated with the measurement system are compared using an analysis of variance (ANOVA) model, in general. A typical ANOVA model used in a standard Gage R&R study is the two-factor random effect model. Then, the ANOVA partitions the total variation into three categories: repeatability, reproducibility, part variation. However, if the process variation possesses the between group variation, within group variation, and within-part variation, these variations can cause the measurement system evaluation to provide misleading results. That is, in the standard Gage R&R study these variations affect the estimate of repeatability, reproducibility, or both. This paper presents a four-factor nested factorial ANOVA model which explicitly considers these variations for the Gage R&R study. The variance component estimates are derived by setting the EMS equations equal to the corresponding mean square from the ANOVA table and solving. And the proposed model is compared with the standard Gage R&R model.

• Korean journal of applied entomology
• /
• v.34 no.1
• /
• pp.1-8
• /
• 1995

The relationships between aphids, plants, other organisms and some physical components of the environment are reviewed. Aspects considered include year cycles, polymorphism fecundity, relationship of different groups of aphids with particular groups of plants, honeydew, alarm pheromones, aposematic colouring, camouflage, colour variation within species, morphological variation within species, multivariate analysis and problems of its interpretation, parasitism, stridulating mechanisms, predators, coevolution of plants and aphids, plant galls, trapping aphids and the interpretation of trap catches, an curation of aphid collections. References are given to sources of information about aphids, with special reference to the Korean fauna.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4749-4755
• /
• 2014

In this study, to maximize the heat release from the heat generating environment, such as a high-capacity inverter, the heat release performance of the extruded-type heat sinks with the variation of the base thickness were investigated using the experimental and numerical methods. The base thickness was varied from 5 to 14 mm. The heat release was characterized by the amount of heat released through the heat sink, the surface temperature of heat sink base between the heat sources, and temperature of heat sources. The surface temperatures between heat sources and the amounts of heat release were improved more as the base thickness was decreased. In contrast, the temperatures of the heat sources decreased with increasing base thickness. Based on the case study of these heat sinks, it is believed that a heat sink with a 9.5mm-thick base was optimized for the heat release.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.5
• /
• pp.499-509
• /
• 2000

Next to carbon dioxide, methane is the second largest contributor to global warming among anthropogenic greenhouse gases. Methane is emitted into the atmosphere from both natural and anthropogenic sources. Natural sources include wetlands, termites, wildries, ocean and freshwater. Anthropogenic sources include landfill, natural gas and oil production, and agriculture. These manmade sources account for about 70% of total global methane emissions; and among these, landfill accounts for approximately 10% of total manmade emissions. Solid waste landfills produce methane as bacteria decompose organic wastes under anaerobic conditions. Methane accounts for approximately 45 to 50 percent of landfill gas, while carbon dioxide and small quantities of other gases comprise the remaining to 50 to 55 percent. Using the closed enclosure technique, surface emission fluxes of methane from the selected landfill sites were measured. These data were used to estimate national methane emission rate from domestic landfills. During the three different periods, flux experiments were conducted at the sites from June 30 through December 26, 1999. The chamber technique employed for these experiments was validated in situ. Samples were collected directly by on-site flux chamber and analyzed for the variation of methane concentration by gas chromatography equipped with FID. Surface emission rates of methane were found out to vary with space and time. Significant seasonal variation was observed during the experimental period. Methane emission rates were estimated to be 64.5$\pm$54.5mgCH$_4$/$m^2$/hr from Kimpo landifll site. 357.4$\pm$68.9mgCH$_4$/$m^2$/hr and 8.1$\pm$12.4mgCH$_4$/$m^2$/hr at KwanJu(managed and unmanaged), 472.7$\pm$1056mgCH$_4$/$m^2$/hr at JonJu, and 482.4$\pm$1140 mgCH$_4$/$m^2$/hr at KunSan. These measurement data were used for the extrapolation of national methane emission rate based on 1997 national solid waste data. The results were compared to those derived by theoretical first decay model suggested by IPCC guidelines.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.162-172
• /
• 1999

For VBR video traffic, Motion-Picture Experts Group(MPEG) coding algorithm was adopted as the standard coding algorithm by International Telecommunication Union(ITU). In this paper, we propose a traffic model of an MPEG coded video traffic in frame level and cell level, and develop an approximate model for evaluating performance of a ATM multiplexer with homogeneous MPEG video sources by considering burst-level variation of aggregated traffics. For homogeneous MPEG video traffics which are frame-synchronized, the performance of the ATM multiplexer is influenced by source correlation at the multiplexing time. When sources are highly correlated, we decompose the aggregated cell streams by the frame-type and model multiplexing process during a frame time as n*D/D/1/K queueing model and suggest an approximate method for obtaining CLP of the ATM multiplexer. In the case that sources are highly correlated, the solution has the meaning of the upper bounds of performance of the ATM multiplexer. For the verification of our model, we compare the solution of our model with simulation resets. As the number of sources increases. The CLP obtained from our model approaches to simulation results, and gives upper bounds of simulation results.