• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2167-2173
• /
• 2000

The HANARO (High-flux Advanced Neutron Application Reactor) has operated since 1995. The Cold Neutron(CN) hole was implanted in the reflector tank from the design stage. Before a vacuum chamber and a moderator cell for the cold neutron source are installed into the CN hole, it is necessary to measure the exact size of the inside diameter and thickness of the CN hole to prevent the interference problem. Due to inaccessibility and high radiation field in the CN hole, a mechanical measurement method is not permitted. The immersion ultrasonic technique is considered as the best method to measure the thickness and the diameter. The 4 axis manipulator of the 2 channel of a sensor module was fabricated. The transducer of 10 MHz results in 0.03 nun of resolution. The inside diameter and thickness for 550 points of the CN hole were measured using 2 channel ultrasonic sensors. The results showed that the thickness is in the range of 13-6.7 mm and inside diameter is in the range of o 156-165. These data will be a good reference in the design of a cold neutron source facility.

• 분석과학
• /
• 제8권4호
• /
• pp.731-738
• /
• 1995

Toxic air pollutants are investigated in a petrochemical industrial park in Taiwan by using a movable open path FTIR. The results show the qualitative and quantitative analysis of emission gases from plants, and also provide the emission rate of different compounds. More than twenty compounds under usual operation are found from this industrial park. The concentration variation with time can be correlated exactly with wind direction. It means that by changing the measuring points, the source of emission can be unambiguously identified. An EPA proved PAL model is applied to estimate the emission rate of either a point or an area source. Local atmospheric stability is determined by releasing the $SF_6$ tracer. The origins of errors come mainly from the uncertainty of source's configuration and the variation of meteorological condition. Through the continuous measurement (half an hour base in this study) of OP-FTIR sensor, the maximum value of emission rate and the annual amount of emission can be derived. The emission rate of the measured toxic gases are derived by the model technique and the results show that the emission amount are in the order of ten to hundred tons per year.

• 한국유체기계학회 논문집
• /
• 제17권1호
• /
• pp.12-21
• /
• 2014

An organic Rankine cycle was analyzed to work at the optimal operating point when the heat source is fluctuated. R245fa was adopted as a working fluid, and an axial-type turbine as expander on the cycle was designed to convert the heat energy to the electricity since the turbo-type expander works at off-design points better than the positive displacement-type expander. A supersonic nozzle was designed to increase the spouting velocity because a higher spouting velocity can produce more output power. They were designed by the method of characteristics for the operating fluid of R245fa. Three different cases, such as various spouting velocities, various inlet total temperatures, and various nozzle numbers, were studied. From these results, an optimal operating cycle can be designed with the organic Rankine cycle when the available heat source as renewable energy is low-grade temperature and fluctuated.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.26-31
• /
• 2013

Use of heat from seawater could be different from the weather conditions of a coastal city and seawater temperatures near the city. It will be a good option to use surface layer water with Heat Pump system for using seawater cooling/heating in Jeju. The study investigates the proper depth for seawater heat gain of Jeju area in Korea. Sampling points are 0, 10, 20, 30m from the surface of the Sea. Seawater temperature does not change significantly according to the depth in winter, while the temperature is quite different according to the depth in summer. In this study, it is analyzed to compare existing system and seawater heat source system for target buildings on Jeju. And this systems are calculated a initial cost.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1388-1393
• /
• 1999

A more reliable algorithm for detecting a high impedance fault (HIF) requires fault currents at the relaying point containing information of load condition as well as HIF characteristics. This paper presents a modeling method of an HIF in a distribution system using EMTP. From the voltage and current waveforms of HIF experiment, the voltage-current characteristic is obtained and then piecewise linearized. The proposed method gets several points on the linearized voltage-current curve and then represents nonlinearity as piecewise linear resistances using Transient Analysis of Control Systems (TACS) in EMTP. Thus, an HIF is represented as a voltage source in the first and third quadrants of voltage-current plane. The method is implemented in EMTP and thus the voltage and current at the relaying point can be obtained when an HIF occurs. In this paper, an HIF was simulated on various load conditions and fault conditions in 22.9 [kV] distribution systems.

• Journal of Microbiology and Biotechnology
• /
• 제16권4호
• /
• pp.543-549
• /
• 2006

DNA microarray was used to study the transcription profiling of Escherichia coli adapting to acetate as a sole carbon source. Bacteria grown in glucose minimal media were used as a reference. The dynamic expression levels of 3,497 genes were monitored at seven time points during this adaptation. Among the central metabolic genes, the glycolytic and glucose phosphotransferase genes were repressed as the bacteria entered stationary phase, whereas the glyoxylate pathway, TCA cycle, and gluconeogenic genes were induced. Distinct induction or repression patterns were recognized among different pathway genes. For example, the repression of glycolytic genes and the induction of gluconeogenic ones started immediately after glucose was depleted. On the other hand, the regulation of the pentose phosphate pathway genes and glyoxylate genes gradually responded to the glucose depletion or was more related to growth in acetate. When the whole genome was considered, many of the CRP, FadR, and Cra regulons were immediately responsive to the glucose depletion, whereas the $\sigma^s$, Lrp, and IHF regulons were gradually responsive to the glucose depletion. The expression profiling also provided differential regulations between isoenzymes; for example, malic enzymes A (sfcA) and B (maeB). The expression profiles of three genes were confirmed with RT-PCR.

• 조명전기설비학회논문지
• /
• 제29권5호
• /
• pp.26-33
• /
• 2015

Secondary optical system designed for LED bulb which emits light in all directions was simulated with Energy Star standards. Components of the optical system were LED light source, the cover of the LED bulb and reflector which is to confirm the diffuser plate and LightTools software was used to design the illumination optics. The main points of the secondary optical system design are the location of the LED light source, the shape of the LED bulb cover, the location of the reflection plate, and the scattering properties of the diffusing plate. Mechanism of the LED bulb is that the light emitted from the light source move on to the backward after reflected by the coated light cover from the inside and then the reflected light is scattered by the diffuser plate. The LED bulb was designed to satisfy the standard light distribution and color specifications of the Energy Star(IES LM-79-08).

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.123-123
• /
• 2020

The present study is aimed to correcting radar-based mean areal precipitation forecasts to improve urban flood predictions and uncertainty analysis of water levels contributed at each stage in the process. For this reason, a long short-term memory (LSTM) network is used to reproduce three-hour mean areal precipitation (MAP) forecasts from the quantitative precipitation forecasts (QPFs) of the McGill Algorithm for Precipitation nowcasting by Lagrangian Extrapolation (MAPLE). The Gangnam urban catchment located in Seoul, South Korea, was selected as a case study for the purpose. A database was established based on 24 heavy rainfall events, 22 grid points from the MAPLE system and the observed MAP values estimated from five ground rain gauges of KMA Automatic Weather System. The corrected MAP forecasts were input into the developed coupled 1D/2D model to predict water levels and relevant inundation areas. The results indicate the viability of the proposed framework for generating three-hour MAP forecasts and urban flooding predictions. For the analysis uncertainty contributions of the source related to the process, the Bayesian Markov Chain Monte Carlo (MCMC) using delayed rejection and adaptive metropolis algorithm is applied. For this purpose, the uncertainty contributions of the stages such as QPE input, QPF MAP source LSTM-corrected source, and MAP input and the coupled model is discussed.

• 융합정보논문지
• /
• 제11권9호
• /
• pp.173-181
• /
• 2021

본 연구의 목적은 위장관 및 순환기 질환에 대한 치료법인 배수혈 습식부항과 사봉혈 점자출혈을 통하여 나타나는 양도락 상의 변화를 분석하여 경락의 존재를 알아보고자 하였다. 위장관 및 순환기 질환으로 배수혈 습식부항과 사봉혈 점자출혈 치료를 받은 30명 환자의 기록지를 선별하였다. 환자는 먼저 안정된 상태에서 양도락 검사를 받았다. 그리고 침대에서 안정을 취한 후 사봉혈 자락 시술을 받고, 엎드린 자세를 취한 후 배수혈 부위에 습식부항 치료를 받았다. 이후 부항 부위를 깨끗하게 알콜 소독한 후 다시 양도락 검사를 시행하였다. 본 시술은 우측 F5 (담), H4 (소장), H6 (대장) 부위와 좌측 H5 (삼초) 부위의 전류값과 각 장부의 양도점의 평균 전류와의 차이에 있어서 유의성 있는 감소를 나타내었다(p<.05, p<.05, p<.001, p<.05). F3 (신) 부위에서의 좌측과 우측의 전류값의 격차에 유의성 있는 증가를 나타내었다(p<.005). 배수혈 습식부항과 사봉혈 자락요법은 임상에서 소화기와 순환기 증상을 완화시켰으며 양도락 검진 상에서도 F5 (담), H4 (소장), H6 (대장), F3 (신), H5 (삼초) 양도점에 유의한 변화를 나타내었다. 이것은 임상 증상과 양도락 진단의 동일성을 보여주는 것으로써 경락체계가 존재하는 것으로 간주할 수 있다.

• 한국수자원학회논문집
• /
• 제40권5호
• /
• pp.373-382
• /
• 2007

수로가 시작되는 지점의 정확한 위치를 찾는 것은 구릉지 사면상의 물의 동적거동으로 인하여 매우 어렵다. 이러한 목적을 위하여, 김주철과 김재한(2007)은 DEM을 이용한 경사와 면적 사이의 규모에 따른 거동특성에 따라 실제 유역내 수로망을 제시한 바 있다. 본 연구는 이들의 연구 성과의 연장으로서, 배수밀도와 수원유역의 기하학적 특성을 기반으로 하여 DEM으로부터 동정된 가설수로망의 신뢰성을 평가하여 보았다. 그 결과 경사-면적한계기준에 의한 가설수로망이 자연유역의 배수구조를 매우 잘 묘사하고 있음을 확인할 수 있었다. 또한 지형학적 동질성을 가진 지역내 수원유역의 형상들 사이에는 훌륭한 기하학적 상사성이 존재함을 추론할 수 있었다. 면적한계기준은 수원유역의 형상을 구속하여 왜곡된 배수구조를 야기할 수도 있었다. 그럼에도 불구하고 DEM으로부터 동정된 가설수로망들이 공간 채움 구조를 잘 표현하고 있는 점이 특히 주목된다.