• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.609-616
• /
• 2023

In a wireless network environment, since sensors are not always connected to power, the life of a battery, which is an energy source supplied to sensors, is limited. Therefore, various studies have been conducted to extend the network life, and a layer-based routing protocol, LEACH(: Low-energy Adaptive Clustering Hierarchy), has emerged for efficient energy use. However, the LEACH protocol, which transmits fused data directly to the sink node, has a limitation in that it consumes as much energy as the square of the transmission distance when transmitting data. To improve these limitations, this paper proposes an algorithm that can minimize the transmission distance with multi-hop transmission where cluster heads are chained between cluster heads through relative distance calculation from sink nodes in every round.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.74-80
• /
• 2015

Purpose Breast lymphoscintigraphy is an important technique to present for body surface precisely, which shows a lymph node metastasis of malignant tumors at an early stage and is performed before and after surgery in patients with breast cancer. In this study, we evaluated several methods of body outline imaging to present exact location of lesions, as well as compared respective exposure doses. Materials and Methods RANDO phantom and SYMBIA T-16 were used for obtaining imaging. A lesion and an injection site were created by inserting a point source of 0.11 MBq on the axillary sentinel lymph node and 37 MBq on the right breast, respectively. The first method for acquiring the image was used by drawing the body surface of phantom for 30 sec using $Na^{99m}TcO_4$ as a point source. The second, the image was acquired with $^{57}Co$ flood source for 30 seconds on the rear side and the left side of the phantom, the image as the third method was obtained using a syringe filled with 37 MBq of $Na^{99m}TcO_4$ in 10 ml of saline, and as the fourth, we used a photon energy and scatter energy of $^{99m}Tc$ emitting from phantom without any addition radiation exposure. Finally, the image was fused the scout image and the basal image of SPECT/CT using MATLAB$^{(R)}$ program. Anterior and lateral images were acquired for 3 min, and radiation exposure was measured by the personal exposure dosimeter. We conducted preference of 10 images from nuclear medicine doctors by the survey. Results TBR values of anterior and right image in the first to fifth method were 334.9 and 117.2 ($1^{st}$), 266.1 and 124.4 ($2^{nd}$), 117.4 and 99.6 ($3^{rd}$), 3.2 and 7.6 ($4^{th}$), and 565.6 and 141.8 ($5^{th}$). And also exposure doses of these method were 2, 2, 2, 0, and $30{\mu}Sv$, respectively. Among five methods, the fifth method showed the highest TBR value as well as exposure dose, where as the fourth method showed the lowest TBR value and exposure dose. As a result, the last method ($5^{th}$) is the best method and the fourth method is the worst method in this study. Conclusion Scout method of SPECT/CT can be useful that provides the best values of TBR and the best score of survey result. Even though personal exposure dose when patients take scout of SPECT/CT was higher than another scan, it was slight level comparison to 1 mSv as the dose limit to non-radiation workers. If the scout is possible to less than 80 kV, exposure dose can be reduced, and also useful lesion localization provided.

• (The)Study of the Eastern Classic
• /
• no.70
• /
• pp.303-345
• /
• 2018

In this article, how the Bangmok(榜目) documents, which are essentially lists of successful passers for the civil competitive examination system of the $Chos{\breve{o}}n$ dynasty, when rendered into digitalized formats, could serve as source of information, which would not only lets us know the $Chos{\breve{o}}n$ individuals' social backgrounds and bloodlines but also enables us to understand the intricate nature that the Yangban network had, will be discussed. In digitalized humanity studies, the Bangmok materials, literally a list of leading elites of the $Chos{\breve{o}}n$ period, constitute a very interesting and important source of information. Based upon these materials, we can see how the society -as well as the Yangban community- was like. Currently, all data inside these Bangmok lists are rendered in XML(eXtensible Makrup Language) format and are being served through DBMS(Database Management System), so anyone who would want to examine the statistics could freely do so. Also, by connecting the data in these Bangmok materials with data from genealogy records, we could identify an individual's marital relationship, home town, and political affiliation, and therefore create a complex narrative that would be effective in describing that individual's life in particular. This is a graphic database, which shows-when Bangmok data is punched in-successful passers as individual nodes, and displays blood and marital relations in a very visible way. Clicking upon the nodes would provide you with access to all kinds of relationships formed among more than 90 thousand successful passers, and even the overall marital network, once the genealogical data is input. In Korea, since 2005 and through now, the task of digitalizing data from the Civil exam Bangmok(Mun-gwa Bangmok), Military exam Bangmok (Mu-gwa Bangmok), the "Sa-ma" Bangmok and "Jab-gwa" Bangmok materials, has been completed. They can be accessed through a website(http://people.aks.ac.kr/index.aks) which has information on numerous famous past Korean individuals. With this kind of source of information, we are now able to extract professional Jung-in figures from these lists. However, meaningful and practical studies using this data are yet to be announced. This article would like to remind everyone that this information should be used as a window through which we could see not only the lives of individuals, but also the society.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.133-137
• /
• 2010

Purpose: Breast cancer is known to be more vulnerable to bone metastasis and lymph node metastasis than other types of cancer, and nuclear examinations whole body bone scan and lymphoscintigraphy are performed commonly before and after breast cancer operation. In case whole body bone scan is performed on the day before lymphoscintigraphy, the radiopharmaceutical taken into and remaining in the bones provides anatomical information for tracking and locating sentinel lymph nodes. Thus, this study purposed to examine how much bone density affects in locating sentinel lymph nodes. Materials and Methods: The subjects of this study were 22 patients (average age $52{\pm}7.2$) who had whole body bone scan and lymphoscintigraphy over two days in our hospital during the period from January to December, 2009. In the blind test, 22 patients (average age $57{\pm}6.5$) who had lymphoscintigraphy using $^{57}Co$ flood phantom were used as a control group. In quantitative analysis, the relative ratio of the background to sentinel lymph nodes was measured by drawing ROIs on sentinel lymph nodes and the background, and in gross examination, each of a nuclear physician and a radiological technologist with five years' or longer field experience examined images through blind test in a five-point scale. Results: In the results of quantitative analysis, the relative ratio of the background to sentinel lymph nodes was 14.2:1 maximum and 8.5:1 ($SD{\pm}3.48$) on the average on the front, and 14.7:1 maximum and 8.5:1 ($SD{\pm}3.42$) on the average on the side. In the results of gross examination, when $^{57}Co$ flood phantom images were compared with images containing bones, the score was relative high as 3.86 ($SD{\pm}0.35$) point for $^{57}Co$ flood phantom images and 4.09 ($SD{\pm}0.42$) for bone images. Conclusion: When whole body bone scan was performed on the day before lymphoscintigraphy, the ratio of the background to sentinel lymph nodes was over 10:1, so there was no problem in locating lymph nodes. In addition, we expect to reduce examination procedures and improve the quality of images by indicating the location of sentinel lymph nodes using bone images as body contour without the use of a source.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.131-140
• /
• 2013

This paper deals with the design and implementation of an interface for interoperation between DiskSim, a well-known disk simulator, and a system-level simulator based on DEVSim++. Such inter-operational simulation aims at evaluation of an overall performance of storage systems which consist of multiple computer nodes with a variety of I/O level specifications. A well-known system-level simulation framework, DEVSim++ environment is based on the DEVS formalism, which provides a sound semantics of modular and hierarchical modeling methodology at the discrete event systems level such as multi-node computer systems. For maintainability we assume that there is no change of the source codes for two heterogeneous simulation engines. Thus, we adopt a notion of simulators interoperation in which there should be a means to synchronize simulation times as well as to exchange messages between simulators. As an interface for such interoperation DiskSimManager is designed and implemented. Various experiments, comparing the results of the standalone DiskSim simulation and the interoperation simulation using the proposed interface of DiskSimManager, proved that DiskSimManager works correctly as an interface for interoperation between DEVSim++ and DiskSim.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.370-376
• /
• 2009

To produce uniform seedlings of tomato and cucumber with inexpensive way, their seedling quality by different light sources was investigated. The raising of seedling was performed by red LED (light emitting diodes), blue LED, red-blue mixed LED or fluorescent light with a fixed PPF(photosynthetic proton flux) level, about $40{\sim}60{\mu}mol{\cdot}m^{-2}{\cdot}sec^{-1}$. In the both tomato and cucumber, the rapid extension of hypocotyledonary axis was observed in Blue LED than fluorescent light, but opposite result was found in Red and mixed LED. During the nursery period of tomato and cucumber, the fresh weight was the highest in Red LED as 74% increasement in tomato and 74% in cucumber. In the case of seedling quality after the tomato nursery, there was no difference in the positions of 1st flower cluster and the number of bearing-flower per flower cluster by each light source. In case of cucumber, until 20th node, the setting ratio of female flower was higher in LED than fluorescent treatment, and also more healthy fruit setting was found in LED. Therefore, we assume that the Red or mixed (Red 2 + Blue 1) LED is more favorable to produce high quality tomato and cucumber seedlings in closed nursery facility.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.697-708
• /
• 1996

In this paper, we study reactive congestion control with priority in ATM network. The priority schemes for buffer access, partial buffer sharing have been investigated in order to improve the utilization of ATM network resources the network and to satisfy the most demanding traffic class. We consider in this paper a discrete-time queueing model for partial buffer sharing with two Markov modulated Poisson inputs. This model can be used to analyze the the effects of the partial buffer sharing priority scheme on system performance for realistic cases of bursty services. Explicit formulae are derived for the number of cells in the system and the loss probabilities for the traffic. Congestion may still occur because of unpredictable statistical fluctuation of traffic sources even when preventive control is performed in the network. In this Paper, we study reactive congestion control, in which each source changes its cell emitting rate a daptively to the traffic load at the switching node. Our intention is that,by incorporating such a congcstion control method in ATM network,more efficient congsestion control is established. We develope an analytical model,and carry out an approximateanalysis of reactive congestion con-trol with priority.Numerical results show that several orders of magnitude improvement in the loss probability can be achieved for the high priority class with little impact on the low priority class performance.And the results show that the reactive congestion control with priority are very effective in avoiding congestion and in achieving the statistical gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1239-1251
• /
• 1999

In this paper a scalable QoS-based hierarchical inter-domain routing scheme for distributed multimedia applications in a high speed wide area network. The problem of QoS-based routing is formulated as a multicriteria shortest path problem, known as NP-complete[21,30]. Our routing scheme consists of two phases. In Phase 1, two graph construction algorithms are performed to model the network under consideration as a graph. The graph contains a part of the network topology which is completely neglected or partially considered by existing routing schemes, thus maintaining more accurate topology information. In Phase 2, a heuristic call-by-call algorithm is performed for selecting a feasible path efficiently in depth first search-like manner on the graph and tailoring to each application's QoS requirements, beginning at a vertex that represents the source node. In this paper, a simple rule is also produced, by which the visiting order of outgoing edges at each vertex on the graph is determined. The rule is based on each edge's the minimum normalized slackness to the QoS requested. The proposed routing scheme extends the PNNI-type hierarchical routing framework. Note that our routing scheme is one of a few QoS-based hierarchical routing schemes that address explicitly the issue of selecting a path with multiple metrics.

• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.218-225
• /
• 2007

As the research on home network technologies, sensor network technologies, and ubiquitous network technologies makes rapid progresses, wireless ad-hoc network have attracted a lot of attention. A wireless mobile ad-hoc network is a temporary network formed by a collection of wireless mobile nodes without the aid of any existing network infrastructure or centralized administration, and it is suitable for ubiquitous computing environments. In this paper, we suggest an extension scheme of a wireless mobile ad-hoc network based on limited multiple paths source routing protocol. This scheme reduces the overhead of route re-establishment and re-registration by maintaining link/node non-disjoint multiple paths between mobile hosts in a wireless mobile ad-hoc network or a mobile host in a wireless mobile ad-hoc network and a base station supporting fixed network services. By maintaining multiple paths, our scheme provides short end-to-end delay and is reliable extension scheme of a wireless mobile ad-hoc network to a fixed network. In this paper, our simulations show that our scheme outperforms existing schemes with regards to throughput and end-to-end delay. Also we show that our scheme outperforms multi-paths approach using disjoint routes with regards to routing overhead.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.69-78
• /
• 2006

In the field of the bioinformatics, it plays an important role in predicting functional information or structure information to search similar sequence in biological DB. Biolrgical sequences have been increased dramatically since Human Genome Project. At this point, because the searching speed for the similar sequence is highly regarded as the important factor for predicting function or structure, the SMP(Sysmmetric Multi-Processors) computer or cluster is being used in order to improve the performance of searching time. As the method to improve the searching time of BLAST(Basic Local Alighment Search Tool) being used for the similarity sequence search, We suggest the nBLAST algorithm performing on the cluster environment in this paper. As the nBLAST uses the MPI(Message Passing Interface), the parallel library without modifying the existing BLAST source code, to distribute the query to each node and make it performed in parallel, it is possible to easily make BLAST parallel without complicated procedures such as the configuration. In addition, with the experiment performing the nBLAST in the 28 nodes of LINUX cluster, the enhanced performance according to the increase in the number of the nodes has been confirmed.