• 한국대기환경학회지
• /
• 제22권3호
• /
• pp.383-391
• /
• 2006

In Korea, the major source of serious air pollution is motor vehicles. Air pollution from vehicles has been annually increased. Then the government will try to control the vehicle emission by applying the effective emission management policy for the manufactured and in-used car. It is necessary to correctly calculate the emission factor for successful propulsion of the vehicle emission control policy. In this study, correlation analysis of exhaust emissions from vehicles between CVS-75 mode and Korea mode was conducted. A total of 25 light-duty buses were tested on the chassis dynamometer system in order to measure CO, HC, NOx PM and fuel efficiency (F.E.). For the test modes, 10 different Korea modes and CVS-75 mode were used. As the result of correlation analysis between those modes, most of the correlation coefficients were higher than 0.90. On the basis of high correlation between those modes, correction factors by driving conditions were estimated. Through the results of this study, we obtained essential basic data to correct difference from those modes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.882-885
• /
• 2003

In this paper, nonlinear echo cancellation using a correlation LMS (CLMS) algorithm is proposed to cancel the undesired nonlinear echo signals generated in the hybrid system of the telephone network. In the telephone network, the echo signals may result the degradation of the network performance. Furthermore, digital to analog converter (DAC) and analog to digital converter (ADC) may be the source of the nonlinear distortion in the hybrid system. The adaptive filtering technique based on the nonlinear Volterra filter has been the general technique to cancel such a nonlinear echo signals in the telephone network. But in the presence of the double-talk situation, the error signal for tap adaptations will be greatly larger, and the near-end signal can cause any fluctuation of tap coefficients, and they may diverge greatly. To solve a such problem, the correlation LMS (CLMS) algorithm can be applied as the nonlinear adaptive echo cancellation algorithm. The CLMS algorithm utilizes the fact that the far-end signal is not correlated with a near-end signal. Accordingly, the residual error for the tap adaptation is relatively small, when compared to that of the conventional normalized LMS algorithm. To demonstrate the performance of the proposed algorithm, the DAC of hybrid system of the telephone network is considered. The simulation results show that the proposed algorithm can cancel the nonlinear echo signals effectively and show robustness under the double-talk situations.

• 천문학회보
• /
• 제40권1호
• /
• pp.64.1-64.1
• /
• 2015

In the present study, we examine the dependence of solar proton peak flux at SOHO and STEREO on 3-D CME parameters (radial speed, angular width, and longitudinal angular separation between its source region and the magnetic footpoints of spacecraft). For this we consider 38 proton enhancements of 16 SEP events observed by SOHO, STEREO-A, and/or B from 2010 August to 2013 June. As a result, we find that the enhancements are strongly dependent on these three parameters. The correlation coefficient between proton peak flux and CME speed is about 0.42 for the cases the footpoints are located inside the lateral boundaries of angular widths, while there is no correlation for the events outside the boundaries. The correlation coefficient between peak flux and angular separation is -0.51. We find that most of strong proton events occur when their angular separations are closer to zero, supporting that most of the proton fluxes are generated near the CME noses rather than their flanks.

• 한국정밀공학회지
• /
• 제31권4호
• /
• pp.327-334
• /
• 2014

This paper presents a method of fault detection and fault localization from acoustic noise measurements. In order to detect the presence of noise sources wavelet transform is applied to acoustic signal. In addition, a cross correlation based method is proposed to calculate the exact location of the noise allowing the user to quickly diagnose and resolve the source of the noise. The fault detection system is implemented using two microphones and a computer system. Experimental results show that the system can detect faults due to artifacts accidentally inserted during the manufacturing process and estimate the location of the fault with approximately 1 cm precision.

• Journal of information and communication convergence engineering
• /
• 제15권3호
• /
• pp.165-169
• /
• 2017

Altmetrics is an emergent research area whereby social media is applied as a source of metrics to evaluate scientific impact. Recently, the interest in altmetrics has been growing. Traditional scientific impact evaluation indictors are based on the number of publications, citation counts and peer reviews of a researcher. As research publications were increasingly placed online, usage metrics as well as webometrics appeared. This paper explores the potential benefits of altmetrics and the deep relationship between each metrics. Firstly, we found a weak-to-medium correlation among the 11 altmetrics and visualized such correlation. Secondly, we conducted principal component analysis and exploratory factor analysis on altmetrics of social media, divided the 11 altmetrics into four feature sets, confirming the dispersion and relative concentration of altmetrics groups and developed the altmetrics evaluation model. We can use this model to evaluate the scientific impact of articles on social media.

• 로봇학회논문지
• /
• 제7권2호
• /
• pp.142-149
• /
• 2012

The camera has limitations of poor visibility in underwater environment due to the limited light source and medium noise of the environment. However, its usefulness in close range has been proved in many studies, especially for navigation. Thus, in this paper, vision-based object detection and tracking techniques using artificial objects for underwater robots have been studied. We employed template matching and mean shift algorithms for the object detection and tracking methods. Also, we propose the weighted correlation coefficient of adaptive threshold -based and color-region-aided approaches to enhance the object detection performance in various illumination conditions. The color information is incorporated into the template matched area and the features of the template are used to robustly calculate correlation coefficients. And the objects are recognized using multi-template matching approach. Finally, the water basin experiments have been conducted to demonstrate the performance of the proposed techniques using an underwater robot platform yShark made by KORDI.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.135-140
• /
• 2012

Massive numbers of users of social networks share various types of information such as opinions, news, and ideas in real time. As a new form of social network, Twitter is a particularly useful information source. Studying influence can help us better understand the role of social networks. The popularity of social networks like Twitter is primarily measured by the number of followers. The number of followers in Twitter and the number of users exposed to news media are important factors in measuring influence. We chose Twitter and the New York Times as representative media to analyze the influence and present an empirical analysis of these datasets. When the correlation between the number of followers in Twitter and the number of users exposed to the New York Times is computed, the result is moderately high. The correlation between the number of users exposed to the New York Times and the number of sections including the users on it, was found to be very high. We measure the normalized influence score using our proposed expression based on the two correlation coefficients.

• Journal of information and communication convergence engineering
• /
• 제16권1호
• /
• pp.38-42
• /
• 2018

In this paper, we consider measurement allocation problem in a spatially correlated sensor field. Our goal is to determine the probability of each sensor's being measured based on its contribution to the estimation reliability; it is desirable that a sensor improving the estimation reliability is measured more frequently. We consider a spatial correlation model of a sensor field reflecting transmission power limit, noise in measurement and transmission channel, and channel attenuation. Then the estimation reliability is defined distortion error between event source and its estimation at sink. Motivated by the correlation nature, we model the measurement allocation problem into a cooperative game, and then quantify each sensor's contribution using Shapley value. Against the intractability in the computation of exact Shapley value, we deploy a randomized method that enables to compute the approximate Shapley value within a reasonable time. Besides, we envisage a measurement scheduling achieving the balance between network lifetime and estimation reliability.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.206-213
• /
• 1996

Third order correlation funciton is to be advantageous to detect unique features embedded in various random signals that are undetectable with second order correlation or power spectrum. In this paper, we will introduce optical modulator which consists of a laser light source, 2-dimensional ultrasonic diffractor cell with signal controlling circuitry, and a CCD camera connected to personal computer for image processing. With this modulator, the third order correlaiton pattern of signal can be immediately obtained at the camera due to parallel nature of optical computing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1425-1431
• /
• 2006

In this study, An analysis of correlation between the vibration transmissions and the dynamic characteristics for floor impact sound insulation materials through model test was carried out. As the results, the correlation coefficients between the vibration transmissions and the dynamic characteristics for floor impact sound insulation materials were over 0.8 at the heavy and light floor impact source and less dynamic stiffness was more effective in reducing the vibration transmission.