• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.738-748
• /
• 2005

The ship radiated noise level fluctuates by the difference of interference and reverberation according to measurement methods and environmental conditions. These phenomena cause error of the source level estimation even in the same environment conditions. This paper describes a quantitative analysis and a reduction method for an error value to the source level estimation in spatial and temporal interference environment. The design criteria of the radiated noise measurement array composed of omni-directional hydrophones and the source level accuracy in the deep water range are given. The source level accuracy in the shallow water range is also derived based on the statistical model of the multiple reflection paths. The results are verified using the water tank experiment and the sea trial.

• 한국해양공학회지
• /
• 제33권4호
• /
• pp.358-363
• /
• 2019

The acoustic power is used as a primary index characterizing underwater sound sources and could be defined by its source level. The source level has been assessed using various experimental techniques such as the reverberation time method and reverberant tank plot method. While the reverberation time method requires reverberation time data extracted in a preliminary experiment in a reverberant water tank, the reverberant tank plot method only needs acoustic pressure data directly obtained at the reverberation water tank. In this research, these experimental techniques were studied in comparative experiments to estimate the source levels of underwater sources in a reverberant water tank. This paper summarizes the basic theories and procedures of these experimental techniques and presents the experimental results for an underwater source in a long cuboid water tank using each technique, along with a discussion.

• 한국소음진동공학회논문집
• /
• 제23권6호
• /
• pp.563-573
• /
• 2013

The ship radiated noise level fluctuates by the interference between direct and reflected paths. The effect of sea surface reflection path on interference depends strongly on sea surface roughness. This paper describes error characteristics of ship acoustic signature estimation by sea surface scattering effect. The coherent reflection coefficient which explains a magnitude of sea surface scattering and its resultant interference acoustic field is analyzed quantitatively as a function of a grazing angle, effective surface height, frequency, source-receiver range and depths of source and receiver. Theoretical interference acoustic field is compared with experimental result for two different sea surfaces and five different frequencies by changing source-receiver range. It is found that both matches well each other and a magnitude of interference acoustic field is decreasing by increasing a grazing angle, effective surface height, frequency, and depths of source and receiver and decreasing source-receiver range. For given experimental conditions, the transmission anomaly which is a bias error of ship acoustic signature estimation, is about a range of 1~3 dB. The bias error of an existing ship radiated noise measurement system is also analyzed considering wind speed, source depth and frequency.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.320-328
• /
• 2005

Last target of architectural acoustics is that people wish to convey voice effectively from the space adaptively in use purpose in building. But, how exactly through space sound (sound source) that wish to deliver from indoor can be passed method to do quantification and evaluate quantity of sound by method to serve indoor architectural acoustics estimation summer period and methods to estimate definition propose. This Study searches special quality of sound source about MLS signal that is occurred short-answer sound source (pistol sound source) and nondirectional speaker among indoor sound estimation method, and measure and analyzed reverberation time (RT60), definition (C80, D50) by regulation of each ISO 3382 in age place (classroom, hall, gymnasium). Analysis result and sound factor among could know that d of two sound sources converges in measurement error extent about reverberation time (RT60) of analysis incidental and sound factors and value shows change irregularly about sound factor of D50, C80, pistol sound source judged there is problem. Also, could know that problem is happened in deflection except reverberation time is in deflection analysis with wave that measure each in fixed distance in branch. Finally, when differ size of sound source and measure about change of sound pressure level in case measure sound pressure level giving difference about 10 dB, sound factor could know that there is no different effect.

• ETRI Journal
• /
• 제41권5호
• /
• pp.658-669
• /
• 2019

For dual-channel time-frequency (TF) overlapped signals with low sparsity in underdetermined blind source separation (UBSS), this paper proposes an effective method based on interval probability to estimate and expand the types of mixing matrices. First, the detection of TF single-source points (TF-SSP) is used to improve the TF sparsity of each source. For more distinguishability, as the ratios of the coefficients from different columns of the mixing matrix are close, a local peak-detection mechanism based on interval probability (LPIP) is proposed. LPIP utilizes uniform subintervals to optimize and classify the TF coefficient ratios of the detected TF-SSP effectively in the case of a high level of TF overlap among sources and reduces the TF interference points and redundant signal features greatly to enhance the estimation accuracy. The simulation results show that under both noiseless and noisy cases, the proposed method performs better than the selected mainstream traditional methods, has good robustness, and has low algorithm complexity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.580-584
• /
• 2011

Sound power is one of the most significant factors to predict and assess noise from sound source. However, many researchers developed indirect methods to calculate the sound power with noise level because it is impossible to measure sound power directly while a train is running. In this paper, we proposes a method to estimate separately each sound power for rolling noise and propulsive noise with the noise emitted from rolling stocks and verifies the validity of the estimation method using other sound power estimation formula.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2534-2546
• /
• 2021

Nuclear emergency preparedness and response is an essential part to ensure the safety of nuclear power plant (NPP). Key support technologies of nuclear emergency decision-making usually consist of accident diagnosis, source term estimation, accident consequence assessment, and protective action recommendation. Source term estimation is almost the most difficult part among them. For example, bad communication, incomplete information, as well as complicated accident scenario make it hard to determine the reactor status and estimate the source term timely in the Fukushima accident. Subsequently, it leads to the hard decision on how to take appropriate emergency response actions. Hence, this paper aims to develop a method for rapid source term estimation to support nuclear emergency decision making in pressurized water reactor NPP. The method aims to make our knowledge on NPP provide better support nuclear emergency. Firstly, this paper studies how to build a Bayesian network model for the NPP based on professional knowledge and engineering knowledge. This paper presents a method transforming the PRA model (event trees and fault trees) into a corresponding Bayesian network model. To solve the problem that some physical phenomena which are modeled as pivotal events in level 2 PRA, cannot find sensors associated directly with their occurrence, a weighted assignment approach based on expert assessment is proposed in this paper. Secondly, the monitoring data of NPP are provided to the Bayesian network model, the real-time status of pivotal events and initiating events can be determined based on the junction tree algorithm. Thirdly, since PRA knowledge can link the accident sequences to the possible release categories, the proposed method is capable to find the most likely release category for the candidate accidents scenarios, namely the source term. The probabilities of possible accident sequences and the source term are calculated. Finally, the prototype software is checked against several sets of accident scenario data which are generated by the simulator of AP1000-NPP, including large loss of coolant accident, loss of main feedwater, main steam line break, and steam generator tube rupture. The results show that the proposed method for rapid source term estimation under nuclear emergency decision making is promising.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.400-407
• /
• 2011

The suggested method of previous Son's study dichotomized subjective response data to modeling noise exposure-response. The method used maximum liklihood estimation instead of least square estimation and the noise exposure-response curve of the study was logistic regression analysis result. The method was originated to modeling community response rate such as %HA or %A. It can be useful when the subjective response was investigated based on predicted noise level. It is difficult to measure the single source emitting noise such as railway because various traffic noise sources combined in our life. The suggested method was adopted to model in this study and railway noise-exposure response curves were modeled because the noise level of this area was predicted data. The data of this study was used by previous Ko's paper but he dealt the area as combined noise area and divided the data by dominant noise source. But this study used all data of this area because the annoyance response to railway noise was higher than other noise according to the result of correlation analysis. The trend of the %HA and %A prediction model to train noise of this study is almost same as the model based on measured noise of previous Lim's study although the investigated areas and methods were different.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.431-436
• /
• 2010

Recently, several open source codes for computational fluid dynamics (CFD) have been emerged and are spreading fast. Our group has chosen OpenFOAM as a platform to develop our own in-house code. In this paper, we would like to share the information on the codes and what we have experienced so far. We introduce several features of OpenFOAM, which include the performance compared with commercial packages, estimation for current user population and our own prospect for future improvement in performance and growth in user population. In addition, we briefly introduce our experience gained in embedding the level set method into the OpenFOAM.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.46-53
• /
• 2010

Recently, several open source codes for computational fluid dynamics (CFD) have been introduced and are spreading fast. Our group has chosen the OpenFOAM as a platform to develop our own in-house code. In this brief review, we would like to share the information on the codes and what we have experienced so far. We introduce several features of OpenFOAM, which include the performance compared with commercial packages, estimation for current user population, and our own prospect for future improvement in performance and growth in user population. In addition, we briefly introduce our experience gained in embedding the level set method into the OpenFOAM.