References
- 2008, Syamlal, M. et al., "Open-Source Software in Computational Research: a Case Study," Modelling and simulation in engineering, Vol.2008, pp.937542.
- 2003, Fuggetta, A., "Open Source Software-An Evaluation," The Journal of Systems and Software, Vol.66, pp.77-90. https://doi.org/10.1016/S0164-1212(02)00065-1
- http://ko.wikipedia.org/wiki/GNU_GPL
- FLUENT, http://www.ansys.com
- CFX, http://www.ansys.com
- OpenFOAM, http://www.openfoam.com
- 2009, 박준권 외 2인, "레벨셋 기법을 이용한 전기습윤현상의 동적 거동에 대한 해석," 한국전산유체공학회 추계학술대회 논문집, pp.84-87.
- 2010, 이희범 외 2인, "OpenFOAM을 이용한 유체-구조연성 해석," 교육과학기술부 한국연구재단 선정 우수연구센터(ERC) 2009년도 결과보고서, pp.89-96.
- ParaView, http://www.paraview.org
- EnSight, http://www.ensight.com
- 2009, Jarman, D. et al., "A Comparison of RANS Turbulence Models in the Prediction of Confined Turbulent Swirling Flows in Urban Drainage Flow Controls," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, Vincent, P.B. et al., "Detached Eddy Simulation of Swirling Flow in a Hydroturbine Draft Tube using OpenFOAM," Fourth OpenFOAM Workshop, Montreal, Canada.
-
2009, Sumner, J. and Masson, C., "Improving the k-
$\varepsilon$ Turbulence Model for Simulation of Atmospheric Boundary Layer Flow," Fourth OpenFOAM Workshop, Montreal, Canada. - 2009, Nilsson, H. "The Dellenback Abrupt Expansion OpenFOAM Case-Study, and the kOmegaSSTF Turbulence Model," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, Campos, F., "Application of OpenFOAM for Automotive Aerodynamics Development," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, Islam, M., "Application of OpenFOAM Technology for Vehicle Aerodynamics Development," Open Source CFD International Conference, Barcelona, Spain.
- 2009, Gagnon, L. et al., "Using OpenFOAM to Model Energy Taken from the Swirl behind a Car," Fourth OpenFOAM Workshop, Montreal, Canada.
-
2008, Gasparini, L. et al., "Improved k-
$\omega$ Turbulence Model and Application to the Computation of Flows on Simplified Car Bodies," Third OpenFOAM Workshop, Milan, Italy. - 2008, Moller, S. et al., "Investigation of the Flow around the Ahmed Body using RANS and URANS with Various Turbulence Models," Third OpenFOAM Workshop, Milan, Italy.
- 2009, Paterson, E. et al., "Simulation of Wakes, Wave Impact Loads and Seakeeping using OpenFOAM," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, Maki, K. and Rosemurgy, B., "Thin-Ship Theory of Wave Resistance on Finite Volume Grids," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2008, Lucchini, T. et al., "Developments in OpenFOAM for Internal Combustion Engine Simulations," Third OpenFOAM Workshop, Milan, Italy.
- 2009, Lucchini, T. et al., "Development of OpenFOAM for the Simulation of the Combustion Process and the Exhaust-after Treatment System in Diesel Engines," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, Petit, O. and Nilsson, H., "The ERCOFTAC Centrifugal Pump OpenFOAM Case-Study," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2008, Beaudoin, M. and Jasak, H., "Adaptation of the General Grid Interface (GGI) for Turbomachinery Simulations with OpenFOAM," Third OpenFOAM Workshop, Milan, Italy.
- 2009, Auvinen, M., "Flow Analysis of a Single-Blade Pump with OpenFOAM," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2008, Mangani, L. and Bianchini, C., "External and Internal Heat Transfer in Turbomachinery Applications," Third OpenFOAM Workshop, Milan, Italy.
- 2008, Costa, A.B. and Cooks, R.G., "Simulated Splashes: Elucidating the Mechanism of Desorption Electrospray Ionization Mass Spectrometry," Chem. Phys. Lett., Vol.464, pp.1-8. https://doi.org/10.1016/j.cplett.2008.08.020
- 2009, Saha, A.A. and Mitra, S.K., "Effect of Dynamic Contact Angle in a Volume of Fluid (VOF) Model for a Microfluidic Capillary Flow," J. Colloid Interface Sci., Vol.339, pp.461-480. https://doi.org/10.1016/j.jcis.2009.07.071
- 2009, Rusche, H., "Metallurgical Process Simulations using OpenFOAM," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, Drobyshevskii, N. and Mukin, R.V., "Modeling of Aerosol Deposition using the Diffusion-Inertia Model in OpenFOAM," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, McIntyre, S.M. et al., "Comparison of Interface Capturing Methods using OpenFOAM," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, Jacobsen, F., "Application of OpenFOAM for Designing Hydraulic Water Structures," Open Source CFD International Conference, Barcelona, Spain.
- 2007, Jasak, H. et al., "OpenFOAM: A C++ Library for Complex Physics Simulations," International Workshop on Coupled Methods in Numerical Dynamics IUC, Dubrovnik, Croatia.
- 2009, Olivier, M. and Dumas, G., "Non-Linear Aeroelasticity for Nano-Air-Vehicles Applications using OpenFOAM," Fourth OpenFOAM Workshop, Montreal, Canada.
- 2009, Amouzandeh, A. et al., "Development of a Computational-Fluid-Dynamics Tool to Predict the Thermal Load of Structures in Case of Fire," Open Source CFD International Conference, Barcelona, Spain.
- 2009, Turnow, J. et al., "LES of Vortex Formation in a Spherical Dimple and Genetic Optimization of Heat Transfer Surfaces," Open Source CFD International Conference, Barcelona, Spain.
- 2009, Ambrosino, F. and Funel, A., "OpenFOAM and Fluent Features in CFD Simulations on CRESCO High Power Computing System," Final Workshop of Grid Projects, PON RICERCA 2000-2006, AVVISO 1575, Catania, Italy.
- 2009, Sasongko, N.A. and Arif, M.F., "Open Source Computational Fluid Dynamic: Challenges and its Future," Global Conference on Open Source, Jakarta, Indonesia.
- 2008, Karvinen, A. and Ahlstedt, H., "Comparison of Turbulence Models in Case of Three-Dimensional Diffuser," Open Source CFD International Conference, Berlin, Germany.
- 2009, Muntean, S. et al., "3D Numerical Analysis of the Unsteady Turbulent Swirling Flow in a Conical Diffuser using Fluent and OpenFOAM," 3rd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and System, Brno, Czech Republic.
- 2009, Horvath, A. et al., "CFD Simulation of Bubble Columns using the VOF Model: Comparison of Commercial and Open Source Solvers with an Experiment," Chemical Engineering Transactions, Vol.18, pp.605-610.
- 2007, Gel, A. et al., "Comparison of Frameworks for a Next-Generation Multiphase Flow Solver, MFIX: a Group Decision-Making Exercise," Concurrency and Computation: Practice and Experience, Vol.19, pp.609-624. https://doi.org/10.1002/cpe.1085
- ScienceDirect, http://www.sciencedirect.com
- 2007, Olsson, E. et al., "A Conservative Level Set Method for Two Phase Flow II," J. Comput. Phys., Vol.225, pp.785-807. https://doi.org/10.1016/j.jcp.2006.12.027
- 2009, 박준권 외 2인, "레벨셋 기법의 물성 보간 방법에 대한 고찰," 한국전산유체공학회 춘계학술대회 논문집, pp.283-289.
- 1966, Taylor, G., "Studies in Electrohydrodynamics I. The Circulation Produced in a Drop by an Electric Field," Proc. of Royal Society of London, Series A, pp.159-166.
- 2008, Cahill, B.P. et al., "A Dynamic Electrowetting Simulation Using the Level-set Method," Proc. of the COMSOL Conference.