• 한국관개배수논문집
• /
• 제18권2호
• /
• pp.54-65
• /
• 2011

This study was performed to analyze the influence of pollutant loads characteristics on the point and non-point sources in Saemangeum watershed area using Hydrological Simulation Program, Fortran (HSPF). The simulation items were flow, BOD, T-N, and T-P(2007~2010). The pollutant loads trend reflects the precipitation. Specifically, the point source loads were almost constant, but the non-point source loads were influenced in the precipitation. It was found that the effect of non-point source is larger than point source. The water quality had a clear trend by the season. However, pollutant loads did not show distinct seasonal changes. The reason is that the pollutant concentration is diluted by the increased flow at summer season. Therefore, it is important to control the non-point source in order to manage water quality in the region. For the management of Saemangeum lake, it is need to control of supplied pollutant loads from Saemangeum watershed.

• 설비공학논문집
• /
• 제24권8호
• /
• pp.605-611
• /
• 2012

The objective of this study is to investigate the influence of the cooling performance for a water-to-water 10 RT ground source heat pump by using the water switching and refrigerant switching method. The test of water-to-water ground source heat pump was measured by varying the compressor speed, load side inlet temperature, and ground heat source side temperature. The cooling capacity and refrigerant mass flow rate of the heat pump increased with increasing ground heat source temperature. But COP of the heat pump decreased with increasing ground heat source temperature. As a result, the water switching method with counter flow, compared to a refrigerant switching method, improves the cooling capacity and COP by approximately 6~9% in average, respectively.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.257-262
• /
• 2002

Water-Electrolyzed gas is a mixed gas has the constant volume ratio 2 1 Hydrogen and Oxygen gained from electrolyzed water, and it has better characteristics in the field of economy, efficiency of energy, and environmental intimacy than acetylene gas and LPG used for existing gas welding equipment. So nowdays many studies of Water-Electrolyzed gas are progressed, and commercially used as a source of thermal energy for gas welding in the industry. For Water-Electrolyzed Source, it was used diode rectifier or SCR rectifier for get DC source. This method which is not looking to improve a source for impossible current control or voltage and limited control intervals. In this paper, it was relized and designed In source of pulse type for complementing existing - DC source type, also by experiment it was acquired producting characteristics of Hydrogen -Oxygen Gas through feature of source

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.352-357
• /
• 2000

This paper presents about an example of circuit design and characteristics of inverter according to the variable capacitance of the DC voltage source separation capacitor used in ZVS-HB type high frequency resonant inverter. The soft switching technology known as ZVS is used to reduce turn off loss at switching. In the event the capacitance of the DC voltage source separation capacitor is varied, the analysis of inverter circuit has generally described by using normalized parameter and operating characteristics have been evaluated in terms of switching frequency and parameters. According to the calculated characteristics value, a method of the circuit designs and operating characteristic of the inverter is also presented in this paper. In addition, this paper proves the validity of theoretical analysis through the experiment. This proposed inverter shows that it can be practically used in future as power source system for the lighting equipment of discharge lamp, DC-DC converter etc.

• 한국광학회지
• /
• 제24권1호
• /
• pp.29-38
• /
• 2013

본 논문에서는 점광원을 기준으로 설계된 자유 형상 렌즈(freeform lens)의 조명 성능과 LED 광원 크기와의 관계 및 공차 특성을 살펴보았다. 비교를 위해 발산 조명 모델(divergent illumination model)을 적용한 두 가지 렌즈와 중첩 조명 모델(overlapped illumination model)을 적용한 한가지 렌즈를 설계하였다. LED 광원이 커짐에 따라 평균 조도에 비해 조도 균일도가 상대적으로 크게 감소하였으며, 정렬 오차에 의한 성능 저하는 거의 발생하지 않았다. 하지만 LED 광원의 방출 특성 변화는 LED 광원 크기에 관계없이 조명 성능에 영향을 미치는 것으로 확인하였다. 발산 조명 모델로 설계된 렌즈가 전반적으로 우수한 성능을 보였지만, LED 방출 특성 변화에 대해서는 중첩 조명 모델로 설계된 렌즈의 성능이 상대적으로 적게 변화함을 알 수 있었다.

• 패션비즈니스
• /
• 제26권4호
• /
• pp.52-63
• /
• 2022

As live commerce, mobile sales platforms based on real-time content and text are drawing attention as a new marketing channel. In particular, the fashion industry also using live commerce as a new fashion distribution channel, requiring marketing strategies to utilize it efficiently. This study attempted to verify the effect of information source, sales promotion, and impulse buying tendency characteristics on fashion live commerce purchase intention. The experimental design of this study was 2(characteristics of information source: expertise vs attractiveness) × 2(sales promotion type: value-added vs price discount) × 2(impulse buying tendency: high vs low) three-way mixed analysis of variance(ANOVA). A convenience sampling of 264 women in their 20s and 50s living in Seoul and the Gyeonggi area who had purchased products through Live Commerce was conducted. For the final analysis, 240 questionnaires were used. Data were analyzed by the SPSS 26 program and three-way ANOVA. Simple main effects analysis was conducted. The results of this study follow. First, there were statistically significant differences in purchase intention according to consumers' impulse buying tendencies and sales promotions. Second, information source and sales promotion showed statistically significant interaction effects on purchase intention. Lastly, information source, sales promotion, and impulse buying tendency showed significant three-way interaction effects on fashion live commerce purchase intention. Therefore, conducting appropriate marketing analysis can result in positive attitudes regarding live commerce products and substantive increases in sales.

• 한국음향학회지
• /
• 제22권2호
• /
• pp.104-112
• /
• 2003

유체기계 덕트 내 음원은 흔히 선형 시불변 모델을 이용하여 음원 임피던스와 강도로 특성화되어진다. 그러나 내연기관 및 압축기 음원에 대한 여러 측정에서 물리적으로 타당하지 않은 부의 저항이 보고된 바 있다. 본 논문에서는 유체기계의 시변성이 음원특성에 미치는 영향에 대하여 해석적으로 연구하였다. 이를 위하여 왕복동 피스톤 및 배기계로 구성된 간단한 유체기계를 전형적인 주기적으로 시변하는 계로서 다루었으며 등가음향 회로를 해석하였다. 해석 해를 이용한 모사측정에서는 실제 음원의 시변성이 부의 저항에 대한 주요한 원인임을 볼 수 있다. 비교적 작은 시변항의 크기를 가지는 경우에 피스톤이 정적 계의 고유진동수의 두 배 또는 그 정수로 나뉜 주파수로 작동한다면 음원이 큰 음향 파워를 방사하게 됨을 알 수 있다.

• 동력기계공학회지
• /
• 제21권2호
• /
• pp.64-69
• /
• 2017

The purpose of this study is to investigate the performance characteristics of seawater cooling system for a fishing vessel. The circulation amount of refrigerant, condensation capacity, evaporation capacity, compression work and coefficient of performance(COP) were analyzed as the heat source temperature changed. The experimental setup consisted of an open-type compressor, a shell&tube type condenser, an evaporator and an expansion valve. The heat source was controlled by a constant temperature chamber. The main results of this study are summarized as follows. The condensation capacity increased with increasing heat source temperature, and it was confirmed that the effect of circulating amount of refrigerant was dominant. The amount of heat for vaporization was almost constant even though the temperature of the heat source increased. On the other hand, the compression power was increased. This is because the compression ratio increases as the condensation pressure, the enthalpy difference between inlet and outlet, the amount of circulating refrigerant increases. The performance coefficient of this system showed a tendency decreasing with increasing heat source temperature. Therefore, the basic data of the seawater cooling system for the maintenance of the catch line of the shore fishing boats was acquired through this study, and it is considered that it will be sufficient for the actual design.

• 생태와환경
• /
• 제51권1호
• /
• pp.135-147
• /
• 2018

In order to investigate the runoff characteristics of nonpoint source pollutants in the Lake Doam watershed, water quality and flow rate were monitored for 38-rainfall events from 2009 to 2016. The EMC values of SS, COD, TN and TP were in the range of 33~2,169, 3.5~56.9, 0.09~7.65 and $0.06{\sim}2.21mg\;L^{-1}$, respectively. As a result of analyzing the effect of rainfall factor on the nonpoint source pollutant load, EMCs of SS, COD and TP showed a statistically significant correlation with rainfall (RA) (p<0.01) and SS showed highly significant correlation with maximum rainfall intensity (MRI, R=0.48). The load ranges of SS, COD, TN and TP were 10.4~11,984.6, 1.1~724.4, 0.6~51.6 and $0.03{\sim}22.85ton\;event^{-1}$, respectively, showing large variation depending on the characteristics of rainfall events. The effect of rainfall on the load was analyzed. SS, COD and TP showed a positive correlation, but TN did not show any significant correlation. The annual load of SS was the highest with $88,645tons\;year^{-1}$ in 2011 when rainfall was the highest with 1,669 mm. The result of impact analysis of nonpoint source pollution reduction project and land-use change on runoff load showed that pollutant load significantly reduced from 2009 to 2014 but SS and TP loads were increased from 2014 to 2016 due to increase in construction area. Therefore, we suggested that nonpoint source pollution abatement plan should be continued to reduce the soil loss and pollutants during rainfall, and countermeasures to reduce nonpoint source pollution due to construction need to be established.

• 한국표면공학회지
• /
• 제44권4호
• /
• pp.155-164
• /
• 2011

Electron beam evaporation source is widely used to prepare thin films by physical vapor deposition because it is very effective to vaporize materials and there is virtually no limit to vaporize materials including metals and compounds such as oxide. In this study, evaporation characteristics of various metals and compounds from an electron beam evaporation source have been studied. The 180 degree deflection type electron beam evaporation source which has 6-hearth crucibles and is capable of inputting power up to 10 kW was employed for evaporation experiment. 36 materials including metals, oxides and fluorides have been tested and described in terms of optimum crucible liner, evaporation state, stability, and so on. Various crucible liners have been tried to find out the most effective way to vaporize materials. Two types of crucible liners have been employed in this experiment. One is contact type liner, and the other is non-contact type one. It has been tried to give the objective information and the most effective evaporation method on the evaporation of materials from the electron beam evaporation source. It is concluded that the electron beam evaporation source can be used to prepare good quality films by choosing the appropriate crucible liner.