• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.208-212
• /
• 2009

Ground wave is an acoustic wave propagating at a sediment sound speed in the case that sediment sound speed is constant with depth, which is explained by modal dispersion effects. In this paper, the ground wave in time domain is simulated using the ray-based approach, which is possible because the modal dispersion can be explained by the guiding of energy caused by reflection and refraction in the waveguide geometry. For a Pekeris waveguide, the ground wave can be interpreted as a sequence of head waves, called a head wave sequence [Choi and Dahl, J. Acoust. Soc. Am. 119, 3660-3668 (2006)]. The ground wave is simulated by convolution of the source signal with a channel impulse response of the head wave sequence, which is compared with simulated signals obtained via a Fourier synthesis of a complex parabolic equation (PE) field.

• Journal of the Korean earth science society
• /
• v.42 no.6
• /
• pp.688-699
• /
• 2021

On September 23, 2020, at 1:39 a.m., a bright fireball above Seocheon was observed across the country. Two fireball explosions were identified in the images of the All-Sky Camera (ASC), and the shock waves were recorded at seismic and infrasound stations in the southwestern Korean Peninsula. The location of the explosion was estimated by a Bayesian-based location method using the arrival times of the fireball-associated seismic and infrasound signals at 17 stations. Realistic azimuth- and rang-dependent propagation speeds of sound waves were incorporated into the location method to increase the reliability of the results. The location of the sound source was found to be 36.050°N, 126.855°E at an altitude of 35 km, which was close to the location of the second fireball explosion. The two explosions were identified as sequential infrasound arrivals at local infrasound stations. Simulations of waveforms for long ranges explain the detection results at distant infrasound stations, up to ~266 km from the sound source. The dominant period of the signals recorded at five infrasound stations is about 0.4 s. A period-energy relation suggests the explosion energy was equivalent to ~0.3 ton of TNT.

• Coupled systems mechanics
• /
• v.12 no.1
• /
• pp.41-68
• /
• 2023

The present work is concerned with the study of the influence of inhomogeneous initial stresses in a hollow cylinder containing a compressible inviscid fluid on the propagation of axisymmetric longitudinal waves propagating in this cylinder. The study is carried out using the so-called three-dimensional linearized theory of elastic waves in bodies with initial stresses to describe the motion of the cylinder and using the linearized Euler equations to describe the flow of the compressible inviscid fluid. It is assumed that the inhomogeneous initial stresses in the cylinder are caused by the internal pressure of the fluid. To solve the corresponding eigenvalue problem, the discrete-analytic solution method is applied and the corresponding dispersion equation is obtained, which is solved numerically, after which the corresponding dispersion curves are constructed and analyzed. To obtain these dispersion curves, parameters characterizing the magnitude of the internal pressure, the ratio of the sound velocities in the cylinder material and in the fluid, and the ratio of the material densities of the fluid and the cylinder are introduced. Based on these parameters, the influence of the inhomogeneous initial stresses in the cylinder on the dispersion of the above-mentioned waves in the considered hydro-elastic system is investigated. Moreover, based on these results, appropriate conclusions about this influence are drawn. In particular, it is found that the character of the influence depends on the wavelength. Accordingly, the inhomogeneous initial stresses before (after) a certain value of the wavelength lead to a decrease (increase) of the wave propagation velocity in the zeroth and first modes.

• The Journal of Internal Korean Medicine
• /
• v.29 no.2
• /
• pp.401-412
• /
• 2008

Objectives : The aim of this study was to investigate the characteristics of Ryodoraku and association of Ryodoraku with gastric dysmotility in functional dyspepsia(FD). Methods : Subjects were 154 patients with FD and 18 patients with asthma. We calculated the average Ryodoraku score(RS, ${\mu}A$) and each variation from physiologic range of 12 Ryodoraku points, and investigated the incidence when left and right points were simultaneously below(bilateral deficiency) or above(bilateral excess) physiologic range. Postprandial regularity of normal slow waves, power ratio, and postprandial % of bowel sound were obtained by electrogastrography and enterotachography, and were used as gastric dysmotility index. Results : 1. Bilateral excess of H4, H5, F1, and F4 and bilateral deficiency of H4, H5, and H6 were characteristic in FD compared with asthma patients. 2. Incidence of gastric dysmotility in bilateral deficiency of H4, H5, and H6 was 100%, and was higher than in total FD patients(88.3%). 3. There was a positive correlation between the variation of H6 and % postprandial bowel sound. 4. Deficient tendency of H4, H5, and H6 was more evident when RS was above $40{\mu}A$ in FD. Conclusions : These findings suggest that gastric dysmotility in FD can be diagnosed when a pattern of H4, H5, H6 bilateral deficiency and F1, F4 bilateral excess is shown at the same time. We think this phenomenon is related to low activity of the vagus nerve rather than meridian pathway with result based on positive correlation between variation of H6 and postprandial % of bowel sound.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.131-137
• /
• 2013

This study deals with the effects of major geometric parameters on the sound wave output of a thermal acoustic system. The output power of the acoustic wave was dependent on the stack position, stack length, resonator tube length, and input power. In experiments, the maximum SPL was generated when the stack was placed between one-fourth to half, resonator and stack length were longer, and input power was increased. The frequency was recorded to be 437 and 885 Hz when the resonator tube length was 200 and 100 mm, respectively. Therefore, when the resonator tube length was shorter, a higher frequency was recorded.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.3
• /
• pp.15-21
• /
• 2003

This experimental study describes the propagation characteristics of the impulse noise emitted from the exit of a perforated pipe attached to the open end of a simple shock tube facility. The pressure amplitudes and directivities of the impulse wave propagating outside from the exit of pipe with several different configurations are measured and analyzed for the range of the incident weak shock wave Mach number between 1.02 and 1.2. In the experiments. the impulse waves are visualized by a Schlieren optical system for the purpose of understanding their propagation characteristics. The results obtained show that for the near sound field the impulse noise strongly propagates toward the pipe axis, but for the far sound field the impulse noise uniformly propagates toward the omnidirections, indicating that the directivity pattern is almost same regardless of the pipe type. For this non-directivity in the far sound field, it is shown that the perforated pipe has little performance to suppress the impulse noise.

• Plant Journal
• /
• v.18 no.2
• /
• pp.41-45
• /
• 2022

The conventional communication method using mud flow pressure waves has a speed of 1-2 bps, so it takes a long time to communicate, making real-time control impossible. Although the sound wave communication method for improving the communication speed by 10 times or more has been commercialized, its use is limited due to its high price and there are not many application cases. In this study, the simulator corresponding to the facility was developed to develop performance similar to the actual test results. For simulating sound wave communication through a drill pipe, we proposed a governing equation that can simulate friction damping by mud and developed a numerical analysis model. The attenuation factor was corrected by comparing it with the attenuation rate of sound wave energy at the drilling site. The developed numerical analysis model was applied to the QPSK modulation type communication algorithm to confirm the excellent performance of the communication error rate of 0.04% in the ground. This is the communication performance under the condition that noise has not been mixed yet, and in order to apply it, the technology of reproducing the actual noise signal for mixing by securing the field noise data was established.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.324-334
• /
• 2024

The Wavefront Curvature Ranging (WCR) is an estimation method for a source range from the wavefront curvature of acoustic waves. The conventional method uses trigonometry to estimate the source range by assuming the sound speed as a constant. Because of this assumption, range error occurs in the ocean environment where the bottom reflection is clearly separated. In order to reduce the range error, Matched Wavefront Curvature Ranging (MWCR) was proposed applying the sound speed structure in the ocean environment and Maximum Likelihood Estimation (MLE). The range error was reduced in the results of the simulation on the proposed method. In the future, this method will be applicable to the sonar system if the reliability of ranging is confirmed by measured signal.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.31-38
• /
• 2018

Based on the measured data in the south western sea of Jeju Island during the SAVEX15(Shallow Water Acoustic Variability EXperiment 2015), the effect of internal waves on the PPD (Predictive Probability of Detection) of a sonar system was analyzed. The southern west sea of Jeju Island has complex flows due to internal waves and USC (Underwater Sound Channel). In this paper, sonar performance is predicted by probabilistic approach. The LFM (Linear Frequency Modulation) and MLS (Maximum Length Sequence) signals of 11 kHz - 31 kHz band of SAVEX15 data were processed to calculate the TL (Transmission Loss) and NL (Noise Level) at a distance of approximately 2.8 km from the source and the receiver. The PDF (Probability Density Function) of TL and NL is convoluted to obtain the PDF of the SE (Signal Excess) and the PPD according to the depth of the source and receiver is calculated. Analysis of the changes in the PPD over time when there are internal waves such as soliton packet and internal tide has confirmed that the PPD value is affected by different aspects.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.287-290
• /
• 2000

In periodic structures where two or more materials of different density and sound speeds are arranged, there exist stop bands, in which waves cannot propagate. In this paper noise and vibration reduction by using band gap phenomena is discussed. The general theoretical background is presented and experimental results for acoustic wave attenuation in 2D cylinder arrays are described.