• 한국항해학회지
• /
• 제25권4호
• /
• pp.371-379
• /
• 2001

We have reported the new measurement system which was substituted digital filter for the analog filter in order to develop the optimal system that could find the time delay between each sensors with high accuracy. And also we have confirmed through the experiments that the accuracy of measurements were differentiated by the methods what kind of digital filter had been adopted. This paper suggests two algorithms which approximate the sound source's bearing and distance. One is that sound source's relative bearing can be approximately regarded as the gradient of hyperbolic asymptote, the other is that the source's range can be approximated under the condition of a long range source relative to the sensor's interval. And a series of experiments were carried out with the source's distance 22.42meters and the random bearing interval within the limits of $-90^{\circ}$~$+90^{\circ}$. As a result, we have recognized that the approximation methods could measure the bearing and distance with higher accuracy than the method using trigonometric relation could do.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2006년도 춘계 학술대회 발표논문집
• /
• pp.49-52
• /
• 2006

The performance of a sound source localization system degrades severely in reverberant and noisy environments. In addition, restriction on the distance between microphones, which is required by portable devices, also lower the system performance. This paper compares the sound source localization algorithms based on time delay of arrival, which are robust to reverberation and noises considering microphone sensor distance. As well, post filter which outputs maximum count time delay is adopted to increase the accuracy.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.24-34
• /
• 2009

This paper investigates active noise control of ducts using filtered-x least mean square(FXLMS) algorithms to reduce noise transmission. Single channel FXLMS(SFXLSM) and multiple channel FXLMS(MFXLMS) algorithms are used to implement the active control systems. The transmission loss is significantly increased by SFXLMS but the sound pressure level(SPL) at the upstream of the error sensor is increased while that of downstream is very low. This increase of the upstream SPL causes the duct wall to vibrate and so to radiate noise. To prevent the wall vibration generated by the sound field upstream, global sound field control is required. To reduce SPL globally along the duct, active noise control using MFXLMS is implemented. We can then be obtained globally reduced SPL. It is found experimentally that the vibration level, and so the radiated noise level, can be reduced by the active noise control using MFXLMS.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.23-29
• /
• 1995

In this study, Active noise controlis implemented with single channel and multi-channel adaptive algorithm in 3 dimensional reverberant enclosure sound. field, which occurrs in complicated acoustic mode. First, for the one case excited with the resonant frequency of an enclosure, a target of control and the other cases excited with band-pass filtered random noise(100~400Hz), it is implemented to control reducing interior noise of enclosure with single channel and realtime multi-channel adaptive algorithm for global noise reduction in enclosure.

• 제어로봇시스템학회논문지
• /
• 제7권8호
• /
• pp.656-663
• /
• 2001

This paper presents a sensor fusion method to recognize a cylindrical object a CCD camera, a laser slit beam and ultrasonic sensors on a pan/tilt device. For object recognition with a vision sensor, an active light source projects a stripe pattern of light on the object surface. The 2D image data are transformed into 3D data using the geometry between the camera and the laser slit beam. The ultrasonic sensor uses an ultrasonic transducer array mounted in horizontal direction on the pan/tilt device. The time of flight is estimated by finding the maximum correlation between the received ultrasonic pulse and a set of stored templates - also called a matched filter. The distance of flight is calculated by simply multiplying the time of flight by the speed of sound and the maximum amplitude of the filtered signal is used to determine the face angle to the object. To determine the position and the radius of cylindrical objects, we use a statistical sensor fusion. Experimental results show that the fused data increase the reliability for the object recognition.

• 센서학회지
• /
• 제30권1호
• /
• pp.25-29
• /
• 2021

In this study, we successfully developed a highly reliable ultrasonic sediment sensor to detect the sediment levels in sewer pipes in harsh environments. The ultrasonic transducer employed in the ultrasonic sediment sensor was designed so as to possess a simple structure. The developed sensor was carefully optimized by simulating the electromechanical characteristics, radiated sound wave pressures, and directivity via finite element analysis. It was also designed to possess a simple mounting structure minimizing the flow disturbance in a 400-mm sewer pipe; additionally, eight ultrasonic transducers were arranged in a four-channel mode, allowing for measurement of the sediment height in five easy steps. Through experimental evaluations, we verified the performance of the ultrasonic sediment-level sensor and its industrial applicability. The results suggested that although the precision value was notably low at 15 mm, the sediment detection performance was adequate; therefore, the developed sensor can potentially be used in industrial applications.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제56차 하계학술대회논문집 25권2호
• /
• pp.255-256
• /
• 2017

공학교육에 있어 창의성과 독창성 그리고 타 분야와의 융합이 지속적으로 강조되고 있으며 이를 위한 새로운 교육이 제안되고 현장에 적극적으로 적용되고 있다. 이에 본 논문에서는 다양한 분야의 기술이 하나로 결합된 스마트 건축물을 제작한다. 목재를 활용하여 제작되는 건축물에는 거리센서(distance sensor), 소리센서(sound sensor), LED 센서(LED sensor) 및 DC 모터(DC motor) 그리고 이를 동작시키는 그래픽 기반의 스크래치 프로그램이 하나로 통합되며 최종적인 융합 결과를 도출한다.

• 제어로봇시스템학회논문지
• /
• 제13권3호
• /
• pp.249-255
• /
• 2007

Under the situation of a fire, it is difficult for a rescue robot to use sensors such as vision sensor, ultrasonic sensor or laser distance sensor because of diffusion, refraction or block of light and sound by dense smoke. But, braille blocks that are installed for the visaully impaired at public places such as subway stations can be used as a map for autonomous mobile robot's localization and navigation. In this paper, we developed a laser sensor stan device which can detect braille blcoks in spite of dense smoke and integrated the device to the robot developed to carry out rescue mission in various hazardous disaster areas at KIST. We implemented MCL algorithm for robot's attitude estimation according to the scanned data and transformed a braille block map to a topological map and designed a nonlinear path tracking controller for autonomous navigation. From various simulations and experiments, we could verify that the developed laser sensor device and the proposed localization method are effective to autonomous tracking of braille blocks and the autonomous navigation robot system can be used for rescue under fire.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.419-423
• /
• 2011

AE는 다른 비파괴 검사방법과 달리 가동 상태에서 구조물의 결함이 발생 및 성장을 검출 할 수 있으며, 연속 검사가 가능하다는 장점으로 인하여 대형 구조물의 안정성 평가에 널리 이용되고 있다. 하지만 AE는 20kHz부터 20MHz 사이에 발생하는 음파를 감지하기 위해 센서를 사용하며, 이 센서의 감도에 따라 결과가 달라질 가능성이 존재한다. 이에 본 연구에서는 STS 304와 SS400 강재에 인장실험을 실시하여, 강재의 균열 신호를 탐지하고자 한다. 인장실험에는 스테인리스강 및 탄소강 시편을 준비하였고, 감도가 다른 센서를 이용하여 동일한 인장실험을 실시하였다. 그리고 균열이 발생하는 13개의 신호 파라미터에 대해 군집분석을 실시하여 4가지 종류의 군집으로 분류하였다. 또한 기무가설을 이용한 통계분석을 통해 두 시험편이 다르지 않다는 것을 증명하였다. 이 결과를 바탕으로 본 실험에서 얻은 Waveform이 재료의 균열신호라는 신뢰성을 확인할 수 있었다.

• 소음진동
• /
• 제11권1호
• /
• pp.57-67
• /
• 2001

Proposed in this paper is a method of measurement of the flow rate in a pipe. The sound waves which are propagated within a pipe are characterized by that the wavenumber in the axial direction is changed according to the flow rate, and these characteristics are used in the present method of measurement of the flow rate. The amount of change in wavenumber of sound waves according to the flow rate can be obtained from the relationship among acoustic pressure signals within a pipe, which are measured by using a microphone array. The flow rate can be obtained by using the amount of change in wavenumber of sound waves and the relational equation of the flow rate. With respect to errors that can occur during the measurement of the flow rate, the types of errors and the method of correction of those errors are presented. This method of measurement of the flow rate has application limitation conditions due to the sensor interval, assumption of sound waves as plane waves, etc. The numerical simulation and experiments for measuring the flow rate of air in a pipe are performed in order to verify the applicability of this method of measurement of the flow rate. The experimental results are shown to be similar to those of the numerical simulation. And the flow rate measured is shown to be consistent with the actual value within 5% error bound.