• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.80-91
• /
• 1995

A theoretical models has been prepared which describes the noise generated by tire/road interaction for the tire structure-borne sound analysis. The model begin with a set of thin shell equations describing the motion of the belt of a radial ply tire, as drived by Bohm('mechanisms of the belted tire', Igeniur-Archiv, XXXV, 1966). Structural quantities required for these equations are derived from material properties of the tire. The rolling shape of a tire is computed from the steady-state limit of these equations. Vibrational response of the tire is treated by the full dependent shell equations. The force input at the tire/road interface is calculated on the basis of tread geometry and distribution of contact patch pressure. Radiation of noise is calculated by a simpson integral. Using the programs, the effect on noise of various tire design variations is computed and discussed. Trends which lead to quiet tire design are identified.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.288-294
• /
• 2016

The space between tire and wheel guard acts as a path for tire pattern noise transmission. In this study, acoustic phenomenon occurring in the tire-wheel guard space is investigated using acoustic mode analysis and visualization of the sound pressure distribution over the wheel guard surface. We introduced a cavity over the wheel guard surface to reduce the tire pattern noise, where the cavity acts as an acoustic damper. The interior noise was reduced by 2 dB(A), and the noise control measures treated in this study may provide an efficient method to improve interior sound quality without increasing cost and weight at the final stage of the vehicle development.

• Journal of Powder Materials
• /
• v.2 no.3
• /
• pp.238-246
• /
• 1995

The purpose of this study is to establish powder metallurgy (P/M) fabrication processes for high performance 2XXX Al composites reinforced with SiC whiskers. Rapidly solidified 2XXX Al powders produced by commercial atomization technique were mixed with SiC whiskers. The results of mixing processes indicated that fluidized zone mixing technique was considerably effective for the large scale production of the mixture of Al powders and whiskers. In order to consolidate these $Al-SiC_w$ mixtures into $Al-SiC_w$ composite billets, a vacuum hot press was set up, and hot processing variables were investigated. Using the hot pressing temperature of $620^{\circ}C$ under the pressure of 50 MPa, good quality $Al-SiC_w$ composite billets having relatively homogeneous microstructure and sound Al/sic interfacial bonding were obtained. Composite billets were then extruded to bars having relatively homogeneous microstructures at the extrusion temperature of 450~500$^{\circ}C$ under the extrusion pressure of 700~ 1000 MPa. Mechanical properties of the extruded bars were found to be comparable with those of the composite processed by Advanced Composite Materials Corp. To improve mechanical properties of the composites, elimination of coarse intermetallic compounds, uniform distribution of reinforcements, and minimization of whisker breakage are suggested.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.111.2-111.2
• /
• 2011

While many astrophysical disks are vertically stratified and obey a polytropic equation of state, most studies on gravitational instability (GI) of flattened systems consider isothermal, razor-thin disks by taking vertical averages of disk properties. We investigate local GI of rotating pressure-confined polytropic disks with resolved vertical stratification by performing linear stability analysis. We find that the GI of vertically-stratified disks is in general a combination of conventional razor-thin Jeans modes and incompressible modes. The incompressible modes that dominate in the limit of the maximal disk compression require surface distortion and are an unstable version of terrestrial water waves. Disks with a steeper equation of state are found to be more Jeans unstable because they tend to have a smaller vertical scale height as well as a steeper temperature gradient corresponding to lower pressure support. GI depends more sensitively on the vertical temperature than density distribution. The density-weighted, harmonic mean, rather than the simple mean, of the adiabatic sound speed well describes the dispersion relation of horizontal modes, and thus is appropriate in the expression for Toomre Q stability parameter of razor-thin disks. We generalize Q into vertically-stratified disks, and discuss astrophysical application of our work.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.951-959
• /
• 2021

The study investigated the effect of food safety knowledge, food safety trust and the factors influencing organic food purchase intention in the 'new normal' of the COVID-19 pandemic. The study employed non-contrived and cross-sectional methods. The data was collected in Malaysia using convenience sampling. A total of 330 valid questionnaires were analyzed using Structural Equation Modelling (SEM) and PROCESS for hypothesis testing. The study revealed a significant relationship involving food safety knowledge on personal attitude, perceived social pressure, and perceived autonomy. Moreover, organic food purchase intention was found to be influenced by personal attitude, perceived social pressure, and perceived autonomy. Interestingly, trust in organic food safety moderated the relationship between perceived autonomy and organic food purchase intention. The study proved valuable for stakeholders and organic food producers to understand the 'new normal' COVID-19 market scenario for a sound understanding of the market and the sustainability of the organic food industry. A new research framework is proposed and validated, related to individual purchase decision in global health issues which is limited in current literature. Hence, the study contributed to a better comprehension of green consumerism mainly in the Asian market.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.207-210
• /
• 2014

This paper is concerned with the prediction of lift-off acoustic loads for a launch vehicle. Intense acoustic load is generated when a launch vehicle is lifted off, and it can induce vibrations of a launch vehicle which cause damage or malfunction of a launch vehicle and a satellite. Lift-off acoustic loads of NARO are predicted by the modified Eldred's second method and the result is compared with the measured data in flight test. The prediction shows similar peak and shape of spectrum to the test data, but some discrepancy can be observed due to the predicted margin. In order to reduce such discrepancy, the sound pressure levels with four source distribution assumptions are calculated. Also, the surface diffraction effects are considered in the predict ion of lift-off acoustic loads, and the predicted result is more similar to the test data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.621-626
• /
• 1997

Combustion instability is a common phenomenon in a ducted flame burner and is known as accompanying low frequency oscillation. This is due to the interaction between unsteady heat release rate and sound pressure field, that is, thermoacoustic feedback. In Rayleigh criterion, combustion instability is triggered when the heat additions is in phase with acoustic oscillation. A Rijke type burner with a pre-mixed flame is built for investigating the effect of Reynolds number and equivalence ratio on thermoacoustic oscillation. In addition, the effect of wall temperature is presented. The results suggest that the frequency of max. oscillation is dependent on Reynolds number and equivalence ratio whereas its magnitude is not a strong function of these two parameters. On the other hand, the wall temperature distribution has much strong effects on the oscillation, even creates different mode of acoustic resonance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.153-159
• /
• 1996

The acoustic characteristics of a direct radiator type loudspeaker has been studied in this paper. The vibration displacement of the speaker cone paper obtained by the finite element analysis has been converted into the vibration velocity and used as a boundary condition for the acoustic analysis. The frequency characteristics and the sound pressure distribution of the loudspeaker resulted from the radiation of the cone vibration have been calculated by the boundary element analysis. The numerical results have been verified by experiments carried out in an anechoic chamber. The variations of the acoustic characteristics due to the changes of some design parameters have been examined using the numerical model.

• Journal of Distribution Science
• /
• v.14 no.12
• /
• pp.79-87
• /
• 2016

Purpose - Since 1990, the sudden stop in capital flows has caused the economic crisis. The purpose of this research is to suggest the policy measures to mitigate the risk of the sudden stop in capital flows. To this end, we examine the theoretical framework and analyze the case study for countries which are faced with the sudden stop. Also we examine the structural problems of the foreign exchange market in Korea and derive the policy implications to prevent the sudden stop. Research design, data, and methodology - The criteria of whether the sudden stop in capital flows occurs are based upon Calvo et al. (2008). In case the proxy variable for the balance of capital account decreases from the average by over twice standard deviation, we determine that the sudden stop occurs for that country. The sample period is from January 1990 to December 2008, as in Calvo (2014). The sample countries are 17 developed countries and 19 emerging market countries, which are different from those of the previous papers as Agosin and Huaita (2012), and Calvo (2014). When the exchange market pressure index(EMPI) is deviated from the average by over three times standard deviation, we determine that the foreign exchange market is unstable for that country. Results - We find that the characteristics of the sudden stop in capital flows are the bunching or contagion among countries, the rapid drop in real effective exchange rate, and the huge decrease in foreign exchange reserves. Many countries tried to increase foreign exchange reserves and regulate capital flows. Also the foreign exchange market in Korea are found to be the volatile exchange rate, the vulnerable external debt and careless management of the foreign exchange derivatives transaction risk. Conclusions - To lessen the risk in the sudden stop of capital flows, this research suggests the some useful policy measures. To enhance the foreign exchange and distribution market stability, we should improve the price mechanism of exchange rate, hold the appropriate level of foreign exchange reserves, prevent excessive inflows of foreign exchange and promote sound transactions of foreign exchange derivatives.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.87-93
• /
• 2014

If one identifies the detailed distribution of pressure and axial velocity at a source plane, the position and strength of major noise sources can be known, and the propagation characteristics in axial direction can be well understood to be used for the low noise design. Conventional techniques are usually limited in considering the constant source characteristics specified on the whole source surface; then, the source activity cannot be known in detail. In this work, a method to estimate the pressure and velocity field distribution on the source surface with high spatial resolution is studied. The matrix formulation including the evanescent modes is given, and the nearfield measurement method is proposed. Validation experiment is conducted on a wide duct system, at which a part of the source plane is excited by an acoustic driver in the absence of airflow. Increasing the number of evanescent modes, the prediction of pressure spectrum becomes further precise, and it has less than -25 dB error with 26 converged evanescent modes within the Helmholtz number range of interest. By using the converged modal amplitudes, the source parameter distribution is restored, and the position of the driver is clearly identified at kR = 1. By applying the regularization technique to the restored result, the unphysical minor peaks at the source plane can be effectively suppressed with the filtering of the over-estimated pure radial modes.