• 제목/요약/키워드: Sound pressure Level

검색결과 690건 처리시간 0.033초

압전폴리머 PVDF를 이용한 복합형 유연 OLED 디스플레이 소자 (Combinational flexible OLED display device using piezoelectric polymer PVDF)

  • 이상엽;배병택;박동희;최지원;최원국
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.55-55
    • /
    • 2008
  • 압전폴리머 PVDF(polyvinylidene difluoride)의 기판소재를 기반으로 한 디스플레이 소자를 연구하였다. 압전 폴리머 PVDF의 양면은 두께 300nm정도의 ITO(Indium Tin Oxide)를 TCO(Transparent conducting oxide)로 R2R(roll to roll)증착하였으며, 이를 적외선 계열 Pulsed Laser로 상온 건식 에칭을 통해 패턴해내고, 이후 고진공 환경에서 Alq3 를 기반의 유기발광소자를 제작하였다. 전기적 신호에 대해서 기계적인 작동이 가능한 투명 압전 폴리머 재료를 디스플레이 발광소자의 기판 소재로 사용함으로써, 궁극적으로 발광기능과 더불어 압전효과에 의한 스피커 기능이 한 개의 개체내에서 독립적으로 구현될 수 있도록 설계하고, 기술적으로 실현시켰다는 점이 본 연구의 의의라고 할 수 있다. 이를 위해서, 섭씨 80도 이상의 온도에서 압전 성질을 상실하는 것으로 알려진 PVDF에 대해서 투명산화전극을 레이져를 이용한 비가열식 승화방법을 통해 패턴화하는 것을 사용했으며, 밀리미터 단위에서 수십 마이크로미터 수준까지 패턴화할 수 있었다. 제작된 복합형 유연 OLED소자는 기계적으로 휘어진 상태에서도 발광 성능과 스피커 성능을 각각 독립적으로 보였으며, Alq3에 의한 녹색발광을 보임을 확인하였고, 이 경우 양자효율은 약 3%이하의 값을 보였다. 또한 각주파수별 음압(SPL: Sound Pressure Level)측정 결과는 압번폴리머가 가청주파수 영역에서 작동함을 보였으며, 고주파영역에서의 SPL값이 증가하는 전형적인 PVDF사용 필름 스피커의 특성을 보였다. 이로부터 제작된 복합형 소자는 본 연구에서 제안된 목적에서 보인 것과 같이, 두 개의 기능이 서로간의 간섭없이 독립적으로 한 개의 개체 내에서 작동함을 확인할 수 있었다. 본 연구 결과로부터 새로운 유연 전자 소자에 대한 디자인 개념을 제시하고, 기타 다른 기능이 접합된 형태의 신개념 전자 소자를 제안하는 것도 가능할 것으로 기대된다.

  • PDF

스피커 응용을 위한 적층형 압전 세라믹 액츄에이터 제조 및 특성 (Characteristics and Fabrication of Multi-Layered Piezoelectric Ceramic Actuators for Speaker Application)

  • 이민선;윤지선;박운익;홍연우;백종후;조정호;박용호;정영훈
    • 한국전기전자재료학회논문지
    • /
    • 제29권10호
    • /
    • pp.601-607
    • /
    • 2016
  • Piezoelectric thick films of soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material (S55) were fabricated using a conventional tape casting method. Ag-Pd electrodes were printed on the piezoelectric film at room temperature and all 5 layered films with a dimension of $12mm{\times}16mm$ were successfully laminated for a multi-layered piezoelectric ceramic actuator. The laminated specimens were co-fired at $1,100^{\circ}C$ for 1 h. A flat layered and dense microstructure was obtained for the $112{\mu}m$ thick piezoelectric actuator after sintering process. Thereafter, a prototype piezoelectric speaker was fabricated using the multi-layered piezoelectric ceramic actuator which can operate as a bimorph. Its SPL (sound pressure level) characteristic was also evaluated for speaker application. Frequency response revealed that the output SPL with a root mean square voltage of 10 V increased gradually to the highest peak of 87.5 dB for 1.5 kHz and exhibited a relatively stable behavior over the measured frequency range (${\leq}20kHz$) at a distance of 10 cm, implying that the fabricated piezoelectric speaker is potential for speaker applications.

자본유출입 급변동과 외환 및 유통시장 안정성에 관한 연구 (A Study on the Sudden Stop in Capital Flows and Foreign Exchange and Distribution Market Stability)

  • 김윤철;이명훈
    • 유통과학연구
    • /
    • 제14권12호
    • /
    • pp.79-87
    • /
    • 2016
  • Purpose - Since 1990, the sudden stop in capital flows has caused the economic crisis. The purpose of this research is to suggest the policy measures to mitigate the risk of the sudden stop in capital flows. To this end, we examine the theoretical framework and analyze the case study for countries which are faced with the sudden stop. Also we examine the structural problems of the foreign exchange market in Korea and derive the policy implications to prevent the sudden stop. Research design, data, and methodology - The criteria of whether the sudden stop in capital flows occurs are based upon Calvo et al. (2008). In case the proxy variable for the balance of capital account decreases from the average by over twice standard deviation, we determine that the sudden stop occurs for that country. The sample period is from January 1990 to December 2008, as in Calvo (2014). The sample countries are 17 developed countries and 19 emerging market countries, which are different from those of the previous papers as Agosin and Huaita (2012), and Calvo (2014). When the exchange market pressure index(EMPI) is deviated from the average by over three times standard deviation, we determine that the foreign exchange market is unstable for that country. Results - We find that the characteristics of the sudden stop in capital flows are the bunching or contagion among countries, the rapid drop in real effective exchange rate, and the huge decrease in foreign exchange reserves. Many countries tried to increase foreign exchange reserves and regulate capital flows. Also the foreign exchange market in Korea are found to be the volatile exchange rate, the vulnerable external debt and careless management of the foreign exchange derivatives transaction risk. Conclusions - To lessen the risk in the sudden stop of capital flows, this research suggests the some useful policy measures. To enhance the foreign exchange and distribution market stability, we should improve the price mechanism of exchange rate, hold the appropriate level of foreign exchange reserves, prevent excessive inflows of foreign exchange and promote sound transactions of foreign exchange derivatives.

자왜형 초음파 트랜스듀서용 도파봉의 설계 및 제작 (Design and Construction of the Acoustic Horn for Magnetostrictive Ultrasonic Transducer)

  • 강국진;노용래
    • 한국음향학회지
    • /
    • 제20권6호
    • /
    • pp.57-65
    • /
    • 2001
  • 본 연구에서는 자왜형 초음파 트랜스듀서의 도파봉을 이론적으로 해석하고 그 타당성을 유한요소 해석법으로 검증하였으며 두 해석법의 결과는 서로 잘 일치하였다. 본 연구에서 유도한 이론적 해석법은 유한요소 해석법에 비해서 빠른 시간 내에 주어진 주파수를 만족시키는 도파봉 길이를 결정할 수 있는 반면, 차단 주파수 (cut-off frequency)를 넘어서는 범위에서만 해석이 가능하다는 단점을 가진다. 해석결과 현수선 도파봉 (catenoidal horn)이 지수함수 도파봉 (exponential horn)에 비해서 더 큰 변위 증폭을 가져왔고, 현수선 형상 길이가 짧을수록 더욱 큰 변위로 증폭시킬 수 있었다. 해석 결과를 바탕으로 공기중에서 공진 주파수 20.8 ㎑를 가지는 자왜형 초음파 트랜스듀서를 제작하여 성능을 측정하였다. 자왜형 트랜스듀서는 수중에서 19.3㎑의 공진 주파수와 199 dB의 최대 SPL (Sound Pressure Level)을 가지고 무지향성의 특성을 보였다.

  • PDF

Reconstruction of a Total Soft Palatal Defect Using a Folded Radial Forearm Free Flap and Palmaris Longus Tendon Sling

  • Lee, Myung-Chul;Lee, Dong-Won;Rah, Dong-Kyun;Lee, Won-Jai
    • Archives of Plastic Surgery
    • /
    • 제39권1호
    • /
    • pp.25-30
    • /
    • 2012
  • Background : The soft palate functions as a valve and helps generate the oral pressure required for normal speech resonance. Speech problems and nasal regurgitation can result from a soft palatal defect. Reduction of the size of the velopharyngeal orifice is required to compensate for the lack of mobility in a reconstructed soft palate. We suggest a large volume folded free flap for reduction of the caliber and a palmaris longus tendon sling for suspension of the reconstructed palate. Methods : Six patients had total soft palate resection for tonsillar cancer and reconstruction with a large volume folded radial forearm free flap combined with a palmaris longus sling. A single surgeon and speech therapist examined the patients with three standardized speech assessment tools: nasometer test, consonant articulation test, and speech acuity test performed for speech evaluation. Results : Mean nasalance score was 76.20% for sentences with nasal sounds and 43.60% for sentences with oral sounds. Hypernasality was seen for oral sound sentences. The mean score of the picture consonant articulation test was 84% (range, 63% to 100%). The mean score of the speech acuity test was 5.84 (range, 5 to 6). These mean ratings represent a satisfactory level of speech function. Conclusions : The large volume folded free flap with a palmaris longus tendon sling for total soft palate reconstruction resulted in satisfactory prognosis for speech despite moderate hypernasality.

지반진동과 수중소음의 상관성 연구 (A Study on the Correlation between Underwater Noise and Ground Vibration)

  • 박정봉;강추원;이창원
    • 화약ㆍ발파
    • /
    • 제31권1호
    • /
    • pp.11-22
    • /
    • 2013
  • 본 연구에서는 암반의 굴착(발파)공사 등으로 인하여 발생되는 지반진동과 어패류 양식장 등의 수중 배경소음도 및 실제 발파작업시에 발생하는 수중 대상소음도의 척도를 비교 분석하고, 회귀분석에 의한 지반진동추정식과 수중 대상소음 간의 상관식을 도출하여 굴착공사시 수중소음도의 발생정도를 사전 예측하고자 하였으며, 나아가 수중소음 관리기준의 정립을 위한 첫걸음으로 본 연구를 시작하게 되었다. 그동안 실험을 진행하기 전에 상황조건을 달리한 어패류 양식장에 대해 배경소음도를 측정하여 본 결과 양식장마다 각각의 환경적 특성에 따라 배경소음 수준정도가 다양하게 나타나고 있고, 수중소음을 유발하는 지반진동을 실측하여 지반진동과 수중 대상소음 간의 상호 관계식을 도출할 수 있었다. 따라서 상관식에 의해 각종 건설공사에서 수중소음 유발정도를 사전에 예측하여 당해 실정에 적합한 관리(허용)기준을 설정, 설계 시공 등에 적용할 수 있으므로 과거의 기술적, 공학적 논리의 빈약한 기술전개로 인한 어패류 피해의 경제적 손실을 사전에 예방할 수 있고, 수중생물체에 대한 안전성을 확보한 가운데 원만한 건설공사를 진행할 수 있다는 가능성을 발견할 수 있었다.

재생형 송풍기의 고효율 저소음 설계를 위한 통합형 최적설계 프로그램 개발 (Development of An Integrated Optimal Design Program for Design of A High-Efficiency Low-Noise Regenerative Fan)

  • 허만웅;김진혁;서태완;구경완;이충석;김광용
    • 한국유체기계학회 논문집
    • /
    • 제17권1호
    • /
    • pp.35-40
    • /
    • 2014
  • A multi-objective optimization of a regenerative fan for enhancing the aerodynamic and aeroacoustic performance was carried out using an integrated fan design system, namely, Total FAN-Regen$^{(R)}$. The Total FAN-Regen$^{(R)}$ was developed for non-specialists to carry out a series of design process, viz., computational preliminary design, three-dimensional aerodynamic and aeroacoustic analyses, and design optimization, for a regenerative fan. An aerodynamic analysis of the regenerative fan was conducted by solving three-dimensional Reynolds-averaged Navier-Stokes equations using the shear stress transport turbulence model. And, an aeroacoustic analysis of the regenerative fan was implemented in a finite/infinite element method by solving the variational formulation of Lighthill's analogy based on the results of the unsteady flow analysis. An optimum shape obtained by Total FAN-Regen$^{(R)}$ shows the enhanced efficiency and decreased sound pressure level as much as 1.5 % and 20.0 dB, respectively, compared to those of the reference design. The performance test was carried out for an optimized regenerative fan to validate the performance of the numerically predicted optimal design.

스틱-슬립음 발생저감을 위한 고분자 소재간 실험적 미끄럼 마찰특성 분석 (Experimental Study on Friction Characteristics between Sliding Polymer Plates for Reduction of Stick-and-Slip Abnormal Noise)

  • 이동규;박희진;박상후
    • 폴리머
    • /
    • 제37권5호
    • /
    • pp.642-648
    • /
    • 2013
  • 이상소음은 고분자 판재가 상호간에 미끄럼 운동을 할 때 마찰에 의한 스틱-슬립 메카니즘에 의하여 발생한다. 본 연구에서는 실험적 방법을 통하여 이상소음을 줄이기 위하여 가전제품에 많이 사용되는 ABS, PP, MIPS, POM 고분자 소재에 대하여 ABS를 기초로 하여 소재간의 조합이 이상소음에 미치는 영향을 알아보았다. 소재간 마찰에 의한 이상소음을 평가하기 위한 실험방법과 장치를 제안하였으며, 실험변수로는 소재의 조합뿐만 아니라 고분자 판재의 표면 거칠기, 수직 접촉하중, 상대운동 속도 등을 두었다. 본 연구를 통하여 이상소음 저감을 위해서 ABS 소재와 POM 소재 조합이 가장 좋음을 알 수 있었으며, 다른 재료조합에 대한 결과도 상호 비교하였다.

서남 연근해 운항 차도철부선의 선내 소음에 관한 연구 (A Study on the Noise Levels of Cargo-Passenger Iron Ships ply South-West Coast Line)

  • 유영훈
    • 해양환경안전학회지
    • /
    • 제12권3호
    • /
    • pp.193-199
    • /
    • 2006
  • 선박에서 선내 소음이 문제로 인식되기 시작한 시기는 1970년대 초반 유럽에서 선박소음규제를 명문화하기 시작하였다. 이후 1982년 국제해사기구(IMO)에서 "International Code on Noise Levels on Board Ships"가 채택되어 오늘날에는 거의 모든 신조 선박에 대하여 해당하는 조항의 적용이 명문화되었다. 특히, 대형의 디젤기관과 다수의 보조기계가 동시에 운전되어지는 기관실 내부는 크고 복잡한 소음이 발생하는 환경으로 되어지고, 이러한 환경에서 작업하는 작업자는 소음성난청으로 되기 쉽다. 최근에는 각 나라별로 직업상의 난청으로부터 작업자를 보호할 목적으로 허용소음 폭로 시간을 법적으로 규제하고 있다. 우리나라에서는 근로기준법에서 정의하고 있지만 선박의 기관실과같이 특수한 조건에 대해서 국제해사기구의 규정에 따르고 있다. 본 논문에서는 국내 서남 연안을 정기적으로 운항하고 있는 화객선에 대한 소음의 정도를 조사하였다

  • PDF

보간법을 이용한 옥타브 밴드폭 음향 하중 SPL의 시계열 데이터 생성 (Generation of Time Series Data from Octave Bandwidth SPL of Acoustic Loading Using Interpolation Method)

  • 고은수;김인걸;전민혁;조현준;박재상;김민성
    • 한국군사과학기술학회지
    • /
    • 제24권1호
    • /
    • pp.1-11
    • /
    • 2021
  • Thermal protection system structures such as double-panel structures are used on the skin of the fuselage and wings to prevent the transfer of high heat into the interior of an high supersonic/hypersonic aircraft. The thin-walled double-panel skin can be exposed to acoustic loads by high power engine noise and jet flow noise, which can cause sonic fatigue damage. In order to predict the fatigue life of the skin, the octave bandwidth SPL should be calculated as narrow bandwidth PSD or acoustic load history using interpolation method. In this paper, a method of converting the octave bandwidth SPL acoustic load into a narrow bandwidth PSD and reconstructed acoustic load history was investigated. The octave bandwidth SPL was converted to the narrow bandwidth PSD using various interpolation methods such as flat, log and linear scale, and the probabilistic characteristics and fatigue damage results were compared. It was found that average error of fatigue damage index by the log scale interpolation method was relatively small among three methods.