• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.380-383
• /
• 2006

This study examines the influence factor of flanking transmission in the wall. Generally, there is the difference of airborne sound isolation between laboratory and field test. The purpose of this study is examing the cause of droping sound insulation performance in the field and searching the method of improving sound insulation performance. First, we measured the sound isolation in the wall at the lab. Then, we measured it in the field and compared them. At the base of these datum, we measured the flanking transmission and solid transmission. For the flanking transmission am the wall, we used intensive method. So, we found the influence of solid transmission.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.795-800
• /
• 2008

The sound transmission loss is a key index to evaluate the acoustic performance of a car-body structure at the high frequency range. From this paper, a new validation method for in-situ sound transmission loss is proposed. First, in-situ sound transmission loss is measured by using PU intensity probe on the condition of complete vehicle. Second, validation test, which is consisted of internal, external and total frequency response function test, is performed by using volume acceleration source and microphones. Then, these test results are compared to validate the accuracy of in-situ sound transmission loss. Finally, the test result of in-site method is compared with results of two reverberant room test method and SEA analytical method. The reliability of in-situ method is confirmed by these procedures.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.2 s.119
• /
• pp.143-148
• /
• 2007

This study examines the influence factor of flanking noise in the wall. Generally, there is the difference of airborne sound isolation between laboratory and field test. The purpose of this study is examing the cause of droping sound insulation performance in the field and searching the method of improving sound insulation performance. First, we measured the sound isolation in the wall at the lab. Then, we measured it in the field and compared them. At the base of these datum, we measured the flanking noise and solid transmission. For the flanking noise in the wall, we used intensive method. So, we found the influence of solid transmission.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.828-833
• /
• 2005

Micro Cellular Plastics create a sensation at polymer industrial for lowering product cost & overcoming a lowering of mechanical intensity. This research based on the experiment of sound absorption & transmission characteristics inquire into acoustical properties of Micro Cellular Plastics in low frequency range. TL difference of MCPs & Soild materials was defined as cell effect. Also, cell effect is expressed by sound reflection & sound absorption.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.579-585
• /
• 2001

This paper proposed a method of reducing a noise in hard disk drive. This method is performed through three parts of procedures. First procedure is sound-oriented experiment, which contains sound intensity techniques and measurements of sound pressure level and sound power. Second is vibration-oriented experiment, which contains FRF(Frequency Response Function) analysis and disk vibration reduction techniques. And the third is computer-oriented simulation, which contains modal analysis and force vibration analysis using ANSYS and sound radiation prediction using SYSNOISE. As these three parts can affect with each other, they should be considered and conducted simultaneously. Through this procedure sound power is measured 2.7 Bels in idle-spinning mode, which is the lowest noise level in the HDD industries.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.421-426
• /
• 2019

The directivity of an underwater sound source should be measured in an acoustically open field such as a calm sea or lake, or an anechoic water tank facility. However, technical difficulties arise when practically implementing this in open fields. Signal processing-based techniques such as a sound intensity method and near-field acoustic holography have been adopted to overcome the problem, but these are inefficient in terms of acquisition and maintenance costs. This study established a simple directivity estimation technique with data acquisition, filtering, and analysis tools. A numerical simulation based on an acoustic radiosity method showed that the technique is practicable for sound source directivity estimation in a diffused reverberant acoustic field like a reverberant water tank.

• Speech Sciences
• /
• v.14 no.1
• /
• pp.137-147
• /
• 2007

The purpose of this study was to examine the syllable structures of ten Korean numeric sounds produced by ten students. Each sound was normalized by its maximum intensity value and divided into onset, vowel, and coda sections after finding abrupt or visible changes in energy values or cumulative values of lower spectral energy at each pulse point using four Praat scripts. Then, segmental durations and cumulative intensity values of each syllable were obtained to find a statistical summary of the syllable structure. Intensity values at 100 proportional time points were also collected to compare the ten sounds. Results showed as follows: Firstly, there was not much deviation from the grand average duration and intensity for the majority of the sounds except the two diphthongal sounds on which their boundary points varied among the speakers. Secondly, the onset point for the CV or CVC category sounds and the boundary between the vowel and the nasal or lateral sound were easy to identify, which may be automatically traced later. Thirdly, there seems some tradeoff among the sections maintaining the same total duration per each syllable. Further studies on syllables with various onsets or codas would be desirable to make a general statement on the Korean syllable structure.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.231-238
• /
• 2012

This study aims for building an application system of converting sound into color image based on synesthetic perception. As the major features of input sound, both scale and octave elements extracted from F0(fundamental frequency) were converted into both hue and intensity elements of HSI color model, respectively. In this paper, we used the fixed saturation value as 0.5. On the basis of color model conversion theory, the HSI color model was then converted into the RGB model, so that a color image of the BMP format was finally created. In experiments, the basic system was implemented on both software and hardware(TMS320C6713 DSP) platforms based on the proposed sound-color image conversion method. The results revealed that diverse color images with different hues and intensities were created depending on scales and octaves extracted from the F0 of input sound signals. The outputs on the hardware platform were also identical to those on the software platform.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.315-322
• /
• 2012

In a tunnel, interior noise of a high speed train increases by 5dB~7dB. The reason is that the sound intensity of the acoustic field in the tunnel significantly increases by the reflected waves occurred in the closed space. Especially, the incident acoustic power largely increases on the outside of the compartment side panel and large transmission of noise is available through the side panel and the glass window. In this paper, the sound insulation strategy in the tunnel is proposed for the next generation high speed train under development. Specimens of the aluminum extruded panels, layered panels and double glazed window are manufactured and intensity transmission loss is measured according to ASTM E2249-02. Based on the measured data, problems in the sound insulation performance are diagnosed and the sound insulation strategy is reviewed on each panel and layered structures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.652-657
• /
• 2003

This paper proposes a method to generate virtual intensity field in space. The sound field of a zone enclosing the listener position is controlled to have maximum acoustic intensity to the desired direction. In order to control acoustic intensity of a zone, space-averaged active intensity is introduced. The ratio of space-averaged active intensity and control effort is defined as a cost function and expressed as a function of source control signals. It is shown that the cost function represents radiation efficiency of multiple sources. The control signals maximizing the cost function is found through eigenvalue analysis. The proposed method is verified by numerical simulations performed in free field condition, and the results provide a relation between wavelength and the size of controllable intensity field.