• 한국음향학회지
• /
• 제34권5호
• /
• pp.371-376
• /
• 2015

본 연구는 지그재그 형상의 음향메타물질 구조체를 1:1, 1:2와 1:4의 축척으로 구성하여 순차배치시킴으로써 나타나는 광대역 음파차단 현상을 유한요소법을 이용하여 분석하였다. 그 결과 단위격자를 축소시킨 구조체의 투과 음압레벨(Sound Pressure Level, SPL)은 각 구조체의 독립적인 투과 특성을 중첩한 것과 같은 효과를 얻었으며 이로인해 음파차단 대역폭과 크기가 현저히 증가하는 것을 볼 수 있다. 또한 유효물질 이론을 이용하여 음향메타물질이 매질의 임피던스와 굴절률을 높이는 것을 확인 하였다. 본 연구를 통해 다양한 메타물질을 이용하고 이를 단위격자를 축소시킴으로써 효과적인 광대역 소리차단을 실현 할 수 있을 것으로 기대된다.

• 한국주거학회논문집
• /
• 제24권2호
• /
• pp.97-104
• /
• 2013

This study involves 2 newly built apartment houses which are A with 23 floors as 150 mm slab width and B with 16 floors as 180 mm slab width. The impact was added by tapping and bang machine at the middle floor level of these 2 apartments and the test was arranged in terms of the characteristic of vibration and sound level which transferred to upper or down floors. As a result, impact floor shows the highest value in terms of both sound and vibration level and followed was at down floor of the Impact floor. Also, blocking function for the lightweight and heavyweight floor impact sound level was tested for each room of the apartment A and B including living room, main room, room 1 and 2. As a result, sound blocking function of B apartment was better than that of A and the function was getting worse when the room size is getting smaller.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.212-219
• /
• 2011

In this paper, intrusion detection technique based on the sound field variation of audio frequency in the security space is proposed. The sound field formed by sound source can be detected with the microphone when the obstacle or intruder is positioned. The sound field variation due to the intruder is mainly caused by the interference of audio wave. With the help of numerical simulation of sound field formations, the increase or decrease of sound pressure level is analyzed not only by the obstacle, but also by the intruder. Even the microphone is positioned behind the source, sound pressure level can be increased or decreased due to the interference of sound wave. Frequency response test is performed with Gaussian white noise signal to get the whole frequency response from 0 to half of sampling frequency. There are three security cases. Case 1 is the situation of empty space with and without intruder, case 2 is the situation of blocking obstacle with and without intruder, and case 3 is the situation of side blocking obstacle with and without intruder. At each case, the frequency response is obtained first at the security space without intruder, and second with intruder. From the experiment, intruder size of diameter of 50 cm pillar can be successfully detected with the proposed technique. Moreover, the case 2 and case 3 bring about bigger sound field variation. It means that the proposed technique have the potential of more credible security guarantee in real situation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.187-192
• /
• 2010

In this paper, intrusion detection technique based on the sound field variation of audio frequency in the security space is proposed. The sound field formed by sound source can be detected with the microphone when the obstacle or intruder is positioned. The sound field variation due to the intruder is based on the interference of audio wave. With the help of numerical simulation of sound field formations, the increase or decrease of sound pressure level is analyzed not only the obstacle, but also the intruder. Even the microphone is positioned behind the source, sound pressure level can be increase or decrease due to the interference. Frequency response test is performed with Gaussian white noise signal to get the whole frequency response from 0 to half of sampling frequency. There are three security cases. Case 1 is the situation of empty space with and without intruder, case 2 is the situation of blocking obstacle with and without intruder, and case 3 is the situation of side blocking obstacle with and without intruder. At each case, the frequency response is obtained first at the security space without intruder, and second with intruder. From the experiment, intruder size of $50cm{\times}50cm$ can be successfully detected with the proposed technique. Moreover, the case 2 or case 3 bring about bigger sound field variation. It means that the proposed technique have the potential of more credible security sensing in real situation.

• 한국멀티미디어학회논문지
• /
• 제23권3호
• /
• pp.430-439
• /
• 2020

The government of the Republic of Korea has introduced SNI blocking method since February 2019 to block illegal sites. Currently, this policy has been considered as a controversial policy in South Korea therefore, about 270,000 South Koreans have been calmed down by and the presidential office petition because people believe that blocking https by SNI would invasion of privacy and freedom of use of the Internet. As soon as the SNI blocking method was used, the bypass method was opened to the Internet, causing side effects. In this study, identifies the development of Internet blocking technology and the development of new technology that bypasses the technology. It also examines Internet censorship in other countries and identifies problems in blocking technology. Through this study would present policy suggestions and technical methodologies for sound Internet use.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.276-277
• /
• 2012

This study was carried out in the laboratory of the reverberation. A total of six specimens were fabricated depending on the thickness and strength. Floor impact sound insulation performance was measured in 1/3 octave band center frequency. The results of this study are as follows. Although some differences in the frequency band, the result of evaluating the weight impact sound blocking performance as the thickness increases, the floor impact sound insulation performance is improved. In addition, to increase the strength of the slab, even if the block impact sound performance is improved.

• 스마트미디어저널
• /
• 제9권3호
• /
• pp.116-121
• /
• 2020

Digital Information Display와 KIOSK는 전용 컨텐츠의 개발 비용으로 인한 초기 도입 비용 및 유지 비용과 제품의 특성으로 인해 설치 비용이 높다는 문제가 있다. 이러한 문제를 해결하기 위해 오픈소스 하드웨어 및 이벤트 기반 논 블로킹 I/O 알고리즘을 사용하여 음성 전송 시스템을 설계하고 구현하였다. 제안하는 오픈 하드웨어를 통한 음성송출 시스템은 시스템 초기 도입 비용과 유지 보수비용이 저렴하고, 다양한 형태로 활용할 수 있어서 정보 취약 계층의 정보에 대한 접근성을 향상할 수 있다.

• 산업기술연구
• /
• 제37권1호
• /
• pp.1-4
• /
• 2017

Speeding up of railway vehicles requires weight reduction of the vehicle body. However, when the vehicle body is lighter, the sound insulation performance for blocking the noise from the outside is reduced. Aluminum is an important material used in the bodywork of transportation vehicles such as railway vehicles, aircraft, and automobiles. In this study, the bending stiffness and sound insulation performance of foamed aluminum with sandwich structure are investigated experimentally. The transmission loss is measured in accordance with the international standard ASTM E 2249-02. The mass-law deviation is used to evaluate the sound insulation performance per weight. In order to examine the applicability of the foamed aluminum sandwich panel to railway vehicles, the analysis of bending stiffness and an experimental review are carried out at the same time.

• 대한의용생체공학회:의공학회지
• /
• 제41권1호
• /
• pp.22-27
• /
• 2020

Auditory stimuli are commonly used in various electroencephalogram experiments, also in EEG-based brain-computer interface systems. However, using conventional earphones that blocks the ear canal attenuates or even blocks external environmental sound which might cause loss of crucial information from surroundings. Instead, bone-conductive earphones are able to deliver sound through vibration without blocking the ear canal. To investigate the feasibility of the bone-conductive earphones for auditory-stimuli based experiments, we compared N100 event-related potential features as well the event-related spectral perturbation and inter-trial coherence of auditory steady-state response between conventional and bone-conductive earphones. The results showed no significant differences between bone conduction and conventional earphones regardless of distinct sound pressures. This result shows that bone conductive earphones can be used for auditory experiments when the environmental sound is crucial to the user.

• 한국방사선학회논문지
• /
• 제12권3호
• /
• pp.335-341
• /
• 2018

의료수준의 향상과 더불어 환자들의 첨단의료장비에 대한 기대수준이 증가하고 있으며 특히 자기공명영상(Magnetic Resonance Image : MRI)은 현재 모든 임상 분야에서 가장 핵심적인 영상진단 도구로서 사용되고 있다. 그러나 검사 중에 발생하는 심각한 소음으로 많은 환자가 심리적인 불안을 경험한다고 한다. 이에 본 연구에서는 자기공명영상검사실의 기존 헤드셋 흡음재에서 차음재를 추가한 헤드셋의 소음저감평가와 차음재별 영상 아티팩트(artifact) 유무를 알아보고자 하였다. 3D 프린팅한 헤드셋 내부에 흡음재(스펀지)와 차음재(아크릴판, 구리판, 3D copper plate)를 교차 배열하여 MRI 검사소음을 녹음하여 스피커로 같은 dB 값의 소음을 발생시키며 3D 프린팅 된 두부모형의 내부에 소음측정기로 dB 값을 측정하여 정량분석을 하며 자체 제작한 헤드셋을 물팬텀에 밀착시킨 후 MRI영상 아티팩트 유무를 검사한다. 드셋의 정량평가를 한 결과, 헤드셋 평균 dB 값은 81.8 dB로 나타났으며, 차음재를 추가한 헤드셋에서 가장 방음효과가 뛰어난 재료조합(구리, 아크릴판, 스펀지, 스펀지) 헤드셋의 평균 dB 값은 70.4 dB 값이 측정되었지만 MRI 시뮬레이션 결과 구리가 반자성체이기 때문에 아티팩트가 나타나 배제하였고 두 번째로 방음효과가 뛰어난 (스펀지, 아크릴판, e-copper plate, 스펀지) 헤드셋의 평균 dB 값은 70.6 dB 값이 측정되었고 MRI 시뮬레이션 결과 인공물 나타나지 않았다. 구리분말이 약 40%가 포함된 e-copper PLA로 출력한 재료를 동일하게 시뮬레이션을 한 결과 인공물 나타나지 않았으므로 3D 프린팅 재료의 사용이 적합하였고 구리보다 경제성이 우수하며 가공이 용이하므로 적합한 재료로 선정하였다. MRI관련 연구에 있어 3D 프린팅을 이용한 상호발전이 매우 기대된다.