• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.869-874
• /
• 2002

Hermetic rotary compressor is one of the most important components for air conditioning system since it has a great effect on both the performance and the noise and vibration of the system. Noise and vibration of rotary compressor is occurred due to gas pulsation during compression process and unbalanced dynamic force. In order to reduce noise and vibration, It is necessary to identify sources of noise and vibration and effectively control them. Many approaches have been tried to identify noise sources of compressor. However, compressor noise source identification has proven to be difficult since the characteristics of compressor noise are complicated due to the interaction of the compressor parts and gas pulsation. In this work, Statistical Energy Analysis has been used to trace the energy flow in the compressor and identify transmission paths from the noise source to the sound field.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1191-1196
• /
• 2009

The T-s chart of air displays graphically the thermophysical properties, so it is very conveniently used in various thermal systems. In previous study, the software analyzing 31 kinds of values in water system and 32 kinds of values in air-conditioning system were developed. In this study, the software drawing 13 kinds of quantity of state on air properties as ideal gas and analyzing 25 kinds of values in any air system was developed. The 13 kinds of quantity of state on air properties are temperature, pressure, specific volume, specific internal energy, specific enthalpy, specific entropy, specific exergy, exergy ratio, density, isobaric specific heat, isochoric specific heat, ratio of specific heat, and velocity of sound, and the 25 kinds of values including 13 kinds are mass flow rate, volume flow rate, internal energy flow rate, enthalpy flow rate, entropy flow rate, exergy flow rate, heat flow rate, power output, power efficiency, reversible work, lost work, and relative humidity. The developed software can draw any range of chart and analysis any state or process on air system. Also, this supports various document-editing functions such as power point. We wish to this chart is a help to design, analysis, and education in air system field.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.157-164
• /
• 2008

The temperature-entropy diagram of water or vapor displays graphically the thermophysical properties, so it is very conveniently used in various thermal systems. On general T-s chart of water, there are temperature, pressure, quality, specific volume, specific enthalpy, specific entropy. However, various state and process values besides above properties can be plotted on T-s diagram. In this study, we developed the software drawing twenty six kinds of properties, that is temperature, pressure, quality, specific volume, specific internal energy, specific enthalpy, specific entropy, specific exergy, exergy ratio, density, isobaric specific heat, isochoric specific heat, ratio of specific heat, coefficient of viscosity, kinematic coefficient of viscosity, thermal conductivity, prandtl number, ion product, static dielectric constant, isentropic exponent, velocity of sound, joule-thomson coefficient, pressure coefficient, volumetric coefficient of expansion, isentropic compressibility, and isothermal compressibility. Also, this software can analyze and print the system values of mass flow rate, volume flow rate, internal energy flow rate, enthalpy flow rate, entropy flow rate, exergy flow rate, heat flow rate, power output, power efficiency, and reversible work. Additionally, this software support the functions such as MS-Power Point.

• 대한소아치과학회지
• /
• 제35권2호
• /
• pp.278-286
• /
• 2008

이 연구는 Casein phosphopeptides-amorphous calcium phosphate (CPP-ACP)paste에 의해 제공되는 Calcium(Ca)과 Phosphorous(P) 이온이 탈회된 법랑질 표면에 적용된 시간에 따라 침투되는 깊이와 Ca/P의 상대적 정량값을 평가하고자 하였다. Field Emission Scanning Electron Microscopy(FE-SEM)와 Energy Dispersive X-ray Spectrometer(EDS)를 이용하여 Ca/P 이온의 정량적 측정으로 탈회된 법랑질 내로의 침투깊이를 계측하였다. 교정치료를 위해 발거된 제 1소구치 치관 협측면의 중앙 1/3부위에 $4{\times}9mm$의 법랑질 window를 제외한 나머지 치관부위는 nail varnish로 도포하여 window 부위의 법랑질만 노출시킨 후, 모든 치아를 0.1M lactic acid로 7일 동안 탈회시켰다. 탈회된 각 치아의 정중앙을 장축에 따라 절단한 후 그 중 4개의 소구치 절편은 10배 희석된 CPP-ACP paste 용액에 각각 1, 2, 3 및 5주 동안 침지시켰고, 나머지 4개의 소구치 절편은 증류수에 동일 기간 침지시켰다. 각 절편을 window에 대해 수직으로 절단하여 건전 법랑질, 탈회된 법랑질 및 재광화된 법랑질의 깊이에 따른 Ca/P의 Spectrum Density Index(SDI)를 FE-SEM과 EDS로 계측하였다. 각 계측치를 Student's t test로 비교 평가하여 다음과 같은 결과를 얻었다. 1. Ca/P 이온이 법랑질 표면으로부터 약 $1050{\sim}1400{\mu}m$까지 침투하여 탈회 법랑질의 깊이인 $1050{\sim}1350{\mu}m$까지 재 광화되었다. 2. 1주군과 2주군의 재광화된 법랑질의 Ca/P SDI는 건전 법랑질보다 유의성 있게 높았으나(p<0.05), 3주군에서는 건전 법랑질보다 유의하게 낮았고(p<0.05), 5주군은 건전 법랑질과 유의한 차이가 없었다(p>0.05). 3. 모든 재광화된 법랑질 간에 Ca/P의 SDI는 유의한 차이가 없었다(p>0.05).

• 수산해양기술연구
• /
• 제27권1호
• /
• pp.13-20
• /
• 1991

어군의 분포밀도와 초음파산란강도의 관계를 검토하기 위하여, 50kHz의 주파수에서 net cage (농망)에 분포밀도가 기지인 어군을 수용하고, 어군밀도의 변화에 기인하는 echo energy의 변동을 고찰하고, 또 cage 실험에 의해 추정한 어체의 평균적인 반사강도와 개개의 어체를 대상으로 구한 평균반사강도를 상호 비교, 검토한 결과를 요약하면 다음과 같다. 1. cage 실험에 의한 붕어의 평균반사강도는 -41.9dB로서, 이 값은 현장에서 개개의 붕어(마취어, 평균체장 19.1cm)를 대상으로 측정한 평균반사강도 -42.6dB보다 0.7dB 더 컸다. 2. cage내에 수용한 어군의 분포밀도가 증가함에 따라, 어군에 의한 평균체적산란강도는 직선적으로 증가하는 경향을 나타내었다. 즉, 어군밀도가 7, 13, 20, 26, 39, 52, 66 마리/m 상(3)였을 때, 각각의 어군에 의한 평균체적산란강도는 -33.0, -28.9, -27.6, -24.3, -25.1, -23.6, -22.1dB이었다. 3. 어군밀도 $\rho(마리/m$ 상(3))와 평균체적산란강도 (dB)와의 사이에는 다음의 관계식이 성립하였다. =-41.9+11.0 $Log(\rho),$ r=0.97 이 식에 회귀직선의 기울기 11은 이론적인 값 10에 거의 근사하였다.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.59-66
• /
• 2002

The objectives of the study were to analyze the acoustic characteristics related to the internal quality factors of watermelon(Citrulus Vulgaris Schrad). Among the various internal quality factors, only four factors such as ripeness, inside cavity, yellow belt and blood flesh were considered in this study. Relationships between the internal quality factors, the day after fruit set and the day after harvest were also investigated. Test apparatus was the same as the apparatus described in the previous study(Choi et at., 2000). The selected sample was divided into four groups; 69 samples used for ripeness tests 56 samples for ripeness test along the day after fruit set and for yellow belt detection, 60 samples for ripeness along the day after harvest 44 samples fur blood flesh detection. It was shown that the first peak frequencies shifted to the lower range and the energy ratios of the bandwidths between 0∼550 Hz to the bandwidths between 850∼2500 Hz increased as the day after fruit set elapsed. Since the acoustic responses of the watermelon such as frequency and magnitude began to change from 10 days after harvest, the storage period of watermelon in a normal temperature condition seemed to be approximately 10 days after harvest. The ratios of the first peak amplitude to the maximum peak amplitude fur the sound watermelon showed the higher value than that fur watermelon with cavity inside, and the separation between the sound and cavity inside could be accomplished by the ratio value of 0.25. The energy ratios (0∼550 Hz/850∼2,500 Hz) for the watermelon with cavity inside showed the higher value than 2.3. The frequency characteristics of the yellow belt watermelon appeared mostly in the range of 600∼900 Hz frequencies. The yellow belt watermelon showing the energy spectral density function at this frequency range to be over 70 seemed to be not a marketable commodity, The energy ratios(0∼550 Hz/850∼2,500 Hz) for the blood flesh watermelon showed the higher value than 3.5.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.330-340
• /
• 2005

Compressible two-phase flow is analyzed based on the arbitrary Lagrangian-Eulerian (ALE) formulation. For water, Tamman type stiffened equation of state is used. Numerical fluxes are calculated using the ALE two-phase Godunov scheme which assumes only that the speed of sound and pressure can be provided whenever density and internal energy are given. Effects of the approximations of a material interface speed are Investigated h method Is suggested to assign a rigid body boundary condition effectively To validate the developed code, several well-known problems are calculated and the results are compared with analytic or other numerical solutions including a single material Sod shock tube problem and a gas/water shock tube problem The code is applied to analyze the refraction and transmission of shock waves which are impacting on a water-gas interface from gas or water medium.

• Asian Journal of Atmospheric Environment
• /
• 제9권1호
• /
• pp.86-90
• /
• 2015

Temperature was considered to estimate the minimum detectable absorption coefficient of aerosol particles from photothermal spectroscopy. Light energy absorbed by subsequent emission from the aerosol results in the heating of the aerosol sample and consequently causes a temperature change as well as changes in thermodynamic parameters of the sample. This thermal effect is the basis of photothermal spectroscopy. Photothermal spectroscopy has several types of techniques depending on how the photothermal effects are detected. Photothermal interferometry traces the photothermal effect, refractive index, using an interferometer. Photoacoustic spectroscopy detects the photothermal effect, sound wave, using a microphone. In this study, it is suggested that the detection limit for photothermal spectroscopy can be influenced by the introduction of a slip correction factor when the light absorption is determined in a high temperature environment. The minimum detectable absorption coefficient depends on the density, the specific heat and the temperature, which are thermodynamic properties. Without considering the slip correction, when the temperature of the environment is 400 K, the minimum detectable absorption coefficient for photothermal interferometry increases approximately 0.3% compared to the case of 300 K. The minimum detectable absorption coefficient for photoacoustic spectroscopy decreases only 0.2% compared to the case of 300 K. Photothermal interferometry differs only 0.5% point from photoacoustic spectroscopy. Thus, it is believed that photothermal interferometry is reliably comparable to photoacoustic spectroscopy under 400 K.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.23-30
• /
• 2010

The residence means a given place. It is repeated that process of overcome, protection, assimilation and adaptation has applied to environmental condition. Architecture is part of environment and various. Thus there are lots of types. We need the place with uniqueness, and it is suitable for biological and humanistic environment. The living space turned to be meaningful place with design, and people start to live with nature together. Therefore design restructures whole environment and makes people to be closed with nature. We have to understand nature of environment to connect one place with the other place, and people start to put down roots certain place. Coping with social needs, we have to develop the architectural alternative which can be applied to natural condition. This study suggest sound high-density urban residential model as it function social mix.

• 한국분말재료학회지
• /
• 제8권1호
• /
• pp.49-54
• /
• 2001

The synthesis and characteristics of W-Ni-Fe nanocomposite powder by hydrogen reduction of ball milled W-Ni-Fe oxide mixture were investigated. The ball milled oxide mixture was prepared by high energy attrition milling of W blue powder, NiO and $Fe_2O_3$ for 1 h. The structure of the oxide mixture was characteristic of nano porous agglomerate composite powder consisting of nanoscale particles and pores which act as effective removal path of water vapor during hydrogen reduction process. The reduction experiment showed that the reduction reaction starts from NiO, followed by $Fe_2O_3$ and finally W oxide. It was also found that during the reduction process rapid alloying of Ni-Fe yielded the formation of $\gamma$-Ni-Fe. After reduction at 80$0^{\circ}C$ for 1 h, the nano-composite powder of W-4.57Ni-2.34Fe comprising W and $\gamma$-Ni-Fe phases was produced, of which grain size was35nm for W and 87 nm for $\gamma$-Ni-Fe, respectively. Sinterability of the W heavy alloy nanopowder showing full density and sound microstructure under the condition of 147$0^{\circ}C$/20 min is thought to be suitable for raw material for powder injection molding of tungsten heavy alloy.