• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.1-7
• /
• 2008

FlexRay is a new standard of network communication system which provides a high speed serial communication, time triggered bus and fault tolerant communication between electronic devices for future automotive applications. FlexRay communication controller (CC) is the core of the FlexRay protocol specification. In this paper, we first design the FlexRay CC protocol specification and function parts using SDL (Specification and Description Language). Then, the system is re-designed using Verilog HDL based on the SDL source. The FlexRay CC system was synthesized using Samsung $0.35\;{\mu}m$ technology. It is shown that the designed system can operate in the frequency range above 80 MHz. In addition, to show the validity of the designed FlexRay system the FlexRay system is combined with sound source localization system in Robot applications. The combined system is implemented using ALTERA Excalibur ARM EPXA4F672C3. It is shown that the implemented system operates successfully.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.264-273
• /
• 2015

Improvement of the radiation beam profile of a medical ultrasonic transducer has been researched in this paper. In order to improve the beam profile, a new transducer structure has been devised that includes both a shaded electrode and a multi-focus lens. For a linear sound source, the beam profile was investigated through finite element analysis, and then the optimal design of the devised structure was carried out by considering such performances as sidelobe level, focal range and beamwidth simultaneously. In the process, the optimal dimension of the devised structure was derived by using the ratio of the focal range to the minimum beamwidth as a performance index. As a result, the beam profile has been improved to have a lower sidelobe level at -20.2 dB and a consistent narrow beamwidth from 30 mm to 160 mm depth with the minimum beamwidth at 2.04 mm. Further, a prototype transducer was fabricated to have the devised structure, and its performance was measured and compared with the analysis results to confirm the validity of the devised transducer structure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.604-605
• /
• 2017

The present work aims at visualization of the supersonic air jet flows discharged from C-D nozzles. In the present experiments, Prticle Image Velocimetry (PIV) was employed to specify the jet flow field quantitatively, and a color Schlieren optical method was applied to observe the same jets qualitatively. The $0.5{\mu}s$ duration of spark light source was used for Schlieren and it can be controled as $0.5{\mu}s$, $1{\mu}s$, $2{\mu}s$ and focusing mode. The convergent-divergent nozzles were used to generate the jet flow with the design Mach number of 2.0, 2.2. Nozzle pressure ratios (NPRs) were varied from 5 to 8. A good comparison of the jet size and shock location from the Schlieren images with the PIV quantitative values is obtained. The obtained images clearly showed the major features of the under-expanded jet, over-expanded jet, sound wave, turbulent eddies and so on.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.3
• /
• pp.1-7
• /
• 1999

This study is to design and implement the synthetic courseware that covers repeating learning, individual teaching, and effective teaching-learning games by using multimedia authoring tool KAS for numerical data of computer science which is especially a little boring and difficult to understand through blackboard-based lesson for senior high school students. It also overcomes the drawbacks of the existing CAI focused on text and image by combining various kinds of media like image, animation and sound effects. Animation of numerical data in the fields of radix conversion makes it possible for learners to check the individual learning process and visual interest. So it comes to increase the effectiveness of learning. Whenever each chapter is finished. learners' understanding can be evaluated by formative test. Applicability test of the developed CAI in Eumsung Senior High School. is statistically evaluated as more effective than that of the blackboard-based lesson.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.449-455
• /
• 2010

Implantable middle ear hearing devices(IMEHDs) have being actively studied to overcome the problems of conventional hearing aids. Vibration transducer, an output devices of IMEHDs, is attached on the ossicular chain and transmits mechanical vibration to cochlea. This approach allows us to hear more clear sound because mechanical vibration is effective to transfer high frequency acoustics, but occurs some problems such as fatigue accumulation to ossicular chian and reduction of vibration displacement caused by mass loading effect. Recently, many studies for the round window stimulation are announced, because it does not cause such problems. It have been studied by older transducers designed for attaching on ossicular chain. In this paper, we proposed a new electromagnetic transducer which consists of two magnets, three coils and a vibration membrane. The magnet assembly, magnet coupled in opposite direction, were placed in the center of three coils, and the optimum length of each coil generating maximum vibrational force was calculated by finite element analysis(FEA). The transducer was implemented as the calculated length of each coil, and measured vibration displacement. From the results, it is verified the vibration displacement can be improved by optimizing the length of coils.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.240-242
• /
• 1996

Use of electrical stimulation for diagnosis and treatment of pyhsiolgocial impairment on the auditory system was reported by many researchers since 1800. Unfortunately, there were no standard methods or theoretical bakground for choosing stimulus conditions because of the lack of understanding on the transmission of sound through the auditory pathways. Therefore, if we could find the mechanisms of normal and abnormal functions for the system objectively, it may be possible to establish the conditions for the appropriate treatment This study was devised with three experimental conditions of electrical stimulation(0.1, 1, and 10mA) to verify the effect of electrical stimulation on the auditory system. ABRs and ECochGs were obtained from 3 Guinea Pigs before and after each stimulation, and five parameters were extracted from ABR and ECochG waveforms. The results showed that the mean differences of the first peaks of ABR, I, before and after all the stimulus conditions were significant at the significant level of p<0.05. Also, amplitude of ECochGs peak(AP) showed higher degrees of differences for the electrical stimulation than that of ABRs. Based on the results of this experiment establishment of an electrical model which characterizes the auditory system could be achieved by computer simulation. This will lead to the design of most accurate model for the real auditory system, which provide the quantitive information regarding diagnosis and treatment.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.59-65
• /
• 2008

Nowadays, implantable hearing aids have been developed to solve the problems of conventional hearing aids. In case of fully implantable hearing aids, an implantable microphone is necessary to receive sound signal beneath the skin. Normally, an implantable microphone has poor frequency response characteristics in high frequency bands of acoustic signal due to the high frequency attenuation effect of skin after implantation to human body. In this paper, the implantable microphone is designed to reduce the high frequency attenuation effect of a skin by putting its resonance frequency at the attenuated range through a finite element analysis (FEA) simulation. The designed implantable microphone through the simulated results has been fabricated by manufacturing process using bio-compatible materials. By the several in-vitro experiments with pig skin, it has been verified that the designed implantable microphone has a resonance frequency around the starting part of the attenuated range and reduces the attenuation effect.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.465-468
• /
• 2008

Recently, VOD market is getting increased and most of public, educational organization, enterprises are providing service as content managing system of WMV standard subordinated to Window OS of Microsoft company. VOD CMS of WMV standard have problem that frequent cut-off, small-size of screen, and image quality which is also chronic problem. In order to solve this problem, technology solving the problem has developed through minimization of buffering time, screen size, high quality sound, and high quality image by image codec and streaming engine which is H. 264. But there are still a problem that systematic management of contents or distribution is difficult. This study expected that there would be a effect preoccupying significant stand of world wide H.264 high quality image mobile VOD managing market by securing domestic on-line VOD contents integrated managing technology by designing system for image VOD contents management having a limit in wmv market and combining H.264 which is new technology.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.651-657
• /
• 2012

In the Busan North port redevelopment project, which is the first large scale port redevelopment project in this country, it adopted the national landscape plan for competitiveness of port city. Furthermore, it includes many efforts on landscape formation in the process of improvement of ocean city image and enhancement of its value, which fits for the situation and characteristics of the original nature, history, and culture resources, together with all facilities, structures, symbols, and eco green belt. Firstly this study attempted to analyze the characteristics of Busan landscape, Busan city design plan(2010), especially coloring plan, together with the case study of landscape color plan for foreign countries. From the basis of this analysis, it was proposed a landscape enhancement strategy in the Busan North port redevelopment project through the coloring plan and it is expected that the result would be used for the basic data for other redevelopment project.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.169-170
• /
• 2012

The efforts for improving 'Maritime Traffic Safety Assessment Scheme(MTSA scheme)' have continued to the present since May 27th, 2009. But recently, there's a controversy about whether it has been performed properly or the results is significant. These new discussions were arose from lack of validity and appropriateness we had yet to find. At this point, it needs to establish sound MTSA scheme through the comprehensive review. This research developed a suitable meta-evaluation model for MSTA with applying theory of the teta-evaluation, that is the evaluation of evaluations and verified by using meta-evaluation methods like as literature studies, expert reviews, surveys and etc. The results of this study can be used to evaluate MTSA activities and it will contribute to improving MTSA scheme.