• Journal of Biosystems Engineering
• /
• v.37 no.2
• /
• pp.90-99
• /
• 2012

Purpose: This study was conducted to investigate the optimal sorting factors in establishing an efficient sorting technology for brown rice. Methods: The brown rice varieties used in this study were Il Pum, Chu Cheong, Dong Jin, Un Gwang, Nam Pyeong, and Dae An. These were classified into whole grain, unriped grain, and green dead rice. The shape factors were analyzed based on length, width and thickness of the grains. Results: The results revealed that the maximum length among whole grain, unriped grain, and green dead rice was observed in Dae An variety while Chu Cheong variety showed the minimum. Further more, Il Pum brown rice showed the maximum width while Dong Jin variety showed the minimum. In the case of thickness, the maximum was observed in Un Gwang variety and that of the minimum among Nam Pyeong variety for both whole grain and unriped grain. Conclusions: The length and width can be used as determinants in sorting factors of whole grain and green dead rice, and the thickness can be considered as optimum sorting factor of whole grain and unriped grain.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.279-286
• /
• 2001

The purpose of this study were to organize a sorting system, to develop an algorithm of image processing for the shape sorting, and to finally develop a scientific and objective shape sorting system of Korean Red-Ginseng for mechanization of the shape sorting. The results of this study are followed. 1. The shape sorting system of Korean Red-Ginseng consists of a control computer, a color CCD camera(WV-CP4110) for image processing, an image processing board(DT3153), and an image acquisition unit. 2. Many image processing skill, such as sliding, stretching, threshold, binary and D$\sub$t/ were used to analyze the shape sorting factors of Korean Red-ginseng. 3. The sorting accuracy of the shape sorting system for the Korean Red-Ginseng was 74.7%. It is 21.1% lower than that of human inspector. Although the system has low accuracy, using more cameras may improve its sorting accuracy.

• Journal of Biosystems Engineering
• /
• v.24 no.4
• /
• pp.325-334
• /
• 1999

The aim of this study was to present a groundwork for development of a sorting system of peeled garlics using machine vision. Images of various garlic samples such as sound, partially defective, discolored, rotten and un-peeled were obtained with a B/W machine vision system. Sorting factors which were based on normalized histogram and statistical analysis(STEPDISC Method) had good separability for various garlic samples. Bayes discriminant function and neural network sorting algorithms were developed with the sample images and were experimented on various garlic samples. It was showed that garlic samples could be classified by sorting algorithm with average sorting accuracies of 88.4% by Bayes discriminant function and 93.2% by neural network.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.746-754
• /
• 1996

Grading and sorting fresh cut flowers are time consuming process. In Korea, cut flowers are sorted mostly by human inspection due to the lack of adequate machinery. In this paper, quality evaluation factors of cut flowers are discussed, and types of sorting machines existing in the market are introduced . Aspects of computer image processing in evaluation the quality of cut flowers are also discussed.

• Agricultural and Biosystems Engineering
• /
• v.1 no.2
• /
• pp.100-105
• /
• 2000

Quality sorting of cut flowers is very essential to increase the value of products. There are many factors that determine the quality of cut flowers such as length, thickness, and straightness of stem, and color and maturity of bud. Among these factors, the straightness of stem and the maturity of bud are generally considered to be more difficult to evaluate. A prototype grading and sorting machine for cut flowers was developed and tested for a rose variety. The machine consisted of a chain-drive feed mechanism, a pneumatic discharge system, and a grading system utilizing color image processing and neural network. Artificial neural network algorithm was utilized to grade cut roses based on the straightness of stem and maturity of bud. Test results showed 89% agreement with human expert for the straightness of stem and 90% agreement for the maturity of bud. Average processing time for evaluating straightness of the stem and maturity of the bud were 1.01 and 0.44 second, respectively. Application of neural network eliminated difficulties in determining criteria of each grade category while maintaining similar level of classification error.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.97-102
• /
• 2011

This study was performed to design and develop an ergonomic equipment for strawberry sorting and packing in agricultural working environments. Potential risk of work related musculo-skeletal disorders associated with farm workers performing strawberry sorting and packing was analyzed through interviews, field surveys, work measurement, and working posture evaluation. For the evaluation of working posture, we used REBA, OWAS, and RULA assessment methods to identify multi-factorial risk factors. Based on the result of comprehensive assessment, a new concept of multi-level rotating table for strawberry sorting and packing was proposed to modify awkward working postures and improve the effectiveness of the farm work. Finally, the characteristics and effectiveness of new equipment was discussed in terms of improvements in productivity, safety, and subjective ratings of farm workers. The results of analysis showed that working conditions improved significantly.

• Journal of Distribution Science
• /
• v.21 no.8
• /
• pp.35-45
• /
• 2023

Purpose: This paper (1) identifies the factors that affect people's changing habits towards waste sorting, (2) evaluates the benefits of waste sorting to the environment and (3) designs communication strategies to change people's behavior and habits in sorting plastic waste in Ho Chi Mnh City, Vietnam. Research design, data and methodology: Using the data from 309 people that are living in Ho Chi Minh City and Structural Equation Modeling (SEM), to evaluate variables and test the hypotheses. Results: Research results show that attitudes, subjective standards, behavioral control, and facilities affect people's intention to classify plastic waste. We find that environmental concerns greatly influence people's attitudes. In contrast, environmental concerns have a relatively weaker effect on people's degree of behavioral control. Conclusion: Environmental protection is a matter of concern in the world. In Vietnam, this issue has been institutionalized into law to create a basis for improving the effectiveness of environmental protection activities. This article has some limitations. Firstly, sample is limited to HCMC residents; the study results are not representative of the entire population of Vietnam. This paper is based on cross-sectional data, which is not the best way to establish a causal relationship between the intention to sort plastic waste and its drivers.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.2
• /
• pp.5-14
• /
• 2024

A study approached the development of a process for efficiently recycling discarded cigarette butts, reported as a major source of microplastic pollution in aquatic environments. Cigarette butts were sorted to extract filters, and cellulose acetate, the raw material of the filters, was extracted to a high degree of purity. The sorting of filters from cigarette butts was conducted through both wet and dry processes, each with optimized sorting conditions. Wet stirring sorting considered factors such as solid-liquid ratio, stirring speed, and stirring temperature. The highest efficiency of wet stirring sorting, at 46.21%, was observed with a solid-liquid ratio of 1:45, stirring speed of 200 rpm, and stirring temperature of 50℃. Dry wind power sorting took into account moisture content and residence time. The filter sorting efficiency reached its peak at 57.10% with a moisture content of 20% and a residence time of 5 minutes. There was no significant difference in the recovery rate of cellulose acetate between the two sorting processes. Dry wind power sorting was deemed a more advantageous process in terms of energy and environmental considerations within the scope of this study.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.130-135
• /
• 2007

An on-line real time grading and sorting system for dried oak mushrooms was developed for on-site application. Quality grades of the mushrooms were determined according to an industrial specification. Three dimensional visual quality features were used for the grading. A progressive color computer vision system with white LED illumination was implemented to develop an algorithm to extract external quality patterns of the dried oak mushrooms. Cap (top) and gil (stem) surface images were acquired sequentially and side image was obtained using mirror. Algorithms for extracting size, roundness, pattern and color of the cap, thickness, color of the gil and amount of rolled edge of the dried mushroom were developed. Utilizing those quality factors normal and abnormal ones were classified and normal mushrooms were further classified into 30 different grades. The sorting device was developed using microprocessor controlled electro-pneumatic system with stainless buckets. Grading accuracy was around 97% and processing time was 0.4 s in average.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.3
• /
• pp.93-108
• /
• 2013

This study is aimed to prepare the effective detail survey methods(Phase II) of abandoned metal mines through the contamination assessment for mine types and facilities in the abandoned metal mine areas. The study sites of 12 abandoned mines are located in Gyeonggi-do and Gangwon-do and those were chosen among 310 sites that the Phase II survey was conducted from 2007 to 2009 after considering the results of Phase I for abandoned mines scattered all over the country. 12 study sites were classified into four types; Type I sites only have pit mouth. Type II sites have pit mouth and mine-waste field. Type III sites have pit mouth and tailing sorting field. Type IV sites have pit mouth, tailing sorting field and concentrator(s). In forest land, paddy soil and farm land of Type I, As and Cd were showed average concentration, and Cu and Pb were high on the pit mouth area in one mines where the pit mouth was developed within 500 m. In the mines of Type II, Cu and Pb were showed average concentration too, but As and Cd were slightly high in pit mouth and mine-waste field. The mines of Type III which had grinding particle process through physical separation milling or hitting showed similar tendency with Type II. However, mines of Type IV pit mouth, mine-waste field and showed various results depending on defining the contamination sources. For example, if contamination source was pit mouth, the mixed results of Type I, II, II were showed. In tailing sorting field which was regarded as the most important source and having high mobility, however, if there were no facilities or it was difficult to access directly, field sampling was missed occasionally during phase I and phase II survey. For that reason, the assessment for tailing sorting field is missed and it leads to completely different results. In the areas of Type I mines, the concentration of heavy metals exceeded precautionary standards of soil contamination or not within 1,000 meters of pit mouth. Nickel(Ni) was the largest factor of the heavy metal contamination in this type. The heavy metals except Arsenic(As) were shown high levels of concentration in Type II areas, where pit mouth and mine-waste field were operated for making powder in upriver region; therefore, to the areas in the vicinity of midstream and downstream, the high content of heavy metals were shown. The tendency of high level of heavy metals and toxic materials contained in flotation agent used during sorting process were found in soil around sorting and tailing field. In the abandoned-pit-mouth area, drygrinding area and tailing sorting field area, the content of Cupper(Cu) and Zinc(Zn) were higher than other areas. Also, the contaminated area were larger than mine reclamation area(2,000 m) and the location of tailing sorting field was one of the important factors to estimate contaminated area.