• Journal of the Korean Geophysical Society
• /
• v.4 no.2
• /
• pp.113-120
• /
• 2001

The discrete wavelet transform(DWT) has potential as a tool for supplying discriminatory attributes with which to distinguish seismic events. The wavelet transform has the great advantage over the Fourier transform in being able to localize changes. In this study, a discrete wavelet transform is applied to seismic traces for identifying seismic events and picking of arrival times for first breaks and S-wave arrivals. The precise determination of arrival times can greatly improve the quality of a number of geophysical studies, such as velocity analysis, refraction seismic survey, seismic tomography, down-hole and cross-hole survey, and sonic logging, etc. provide precise determination of seismic velocities. Tests for picking of P- and S- wave arrival times with the wavelet transform method is conducted with synthetic seismic traces which have or do not have noises. The results show that this picking algorithm can be successfully applied to noisy traces. The first arrival can be precisely determined with the field data, too.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.70-78
• /
• 1997

3Y-TZP/SUS316 Functionally Graded Material (FGM) was fabricated by slip casting method. Alumina mold was used to overcome problems of gypsum mold in slip casting process, and the optimal dispersion con-ditions of 3Y-TZP/SUS316 binary slurries was determined using electrokinetic sonic amplitude and a viscometer, and observing sedimentation behavior. The properties of the specimens casted by gypsum mold and alumina mold were compared in terms of changes in shrinkage rate, drying and sintering conditions, and microstructure. It was found that the specimens obtaine from the alumina mold showed a clean surface, easier thickness control of each layer, and higher productivity. Especially, no degradation was observed in the SUS316 prepared using alumina mold. Thus it is desirable to use porous alumina mold rather than gyp-sum mold for the slip casting of 3Y-TZP/SUS316-FGM.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1704-1708
• /
• 2008

Many studies have emphasized the importance of resistive exercise to maintain a healthy human body, particular in prevention of weakening of physical strength. Recently, some studies advocated that an application of vibration as a supplementary means in a regular training was effective in encouraging physical strength. Aim of the current study was, therefore, to identify if an application of vibration in a resistive exercise was effective in encouraging physical strength as that in a regular training. A 3-dimensional virtual lower extremity model for a healthy male and virtual leg-press model were generated and synchronized. Dynamic leg-press exercises on a slide machine with/without extra load and on a footboard with vibration as well as on a slide machine with extra load were analyzed. The results of the current indicated that the application of the vibration on the dynamic leg-press exercise might be not greatly effective in encouraging physical strength, compared with the dynamic leg press exercise with extra load. It was, however, thought that the application of the vibration might be helpful to elderly individuals because the reduced maximum muscle strength appeared by the effect of the vibration may avoid a muscular spasm, which can be driven from a high muscle strength sometimes produced during the leg-press exercise with extra load.

• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.8-14
• /
• 2016

This study describes the effect of the critical pressure ratio of a control valve on the performance of an air spring system composed of an air spring, auxiliary chamber, control valve and mass in order to suggest a more efficient design for an air spring system. The critical pressure ratio of the control valve is assumed to have a fixed value, but the critical pressure ratio of the control valve is known to have various values between 0.05 and 0.6, and the effect of the variation of the critical pressure ratio on the performance of the air spring system has not yet been reported. The analysis derives nonlinear and linear governing equations of the air spring system, including the critical pressure ratio of the control valve. This simulation study is presented to show that the impedance and transmissibility characteristics of the air spring system change due to variations in the critical pressure ratio of the control valve as well as its sonic conductance. As a result, the critical pressure ratio of the control valve should be maintained as large as possible to improve the vibration isolation characteristics of the air spring system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.849-859
• /
• 2020

The semi-empirical equation and commercial computational tool were used to predict the base drag of a guided missile with free-stream Mach numbers and chamber pressures, and the results were generally agree each other. Differences in flow characteristics and base drags were observed with over/under expansion conditions by the nozzle. Under the over-expansion condition, the base pressure decreased as the expansion fan was generated at upper region of the base, and base pressure decreased further with increasing free-stream Mach number as the expansion becomes strong. Under the under-expansion conditions, a shock wave was generated around the base by the influence of the nozzle flow, which increased the base pressure, and the effect increased as the chamber pressure increased. Under the same chamber pressure condition, as the free-stream Mach number increases, the characteristic that the base pressure decreases as the shock wave generated at the base moves downstream was observed.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.530-534
• /
• 2002

최근 치근단 와동 형성 시 초음파 또는 음파 기구를 이용하는 것이 보편화되어 있고 여러 측면에서 평가되어져 왔다. 본 연구의 목적은 혐기성 세균을 이용한 미세 누출 모델을 이용하여 초음파와 음파 기구를 사용, 치근단 와동 형성을 하였을 때 두 기구의 사용이 충전된 치근단 와동의 미세 누출에 미치는 영향을 비교 평가하는 것이다. 48개의 단근치의 근관을 crown-down방법을 이용 Profile로 .06 black까지 근관 성형을 시행하고 수직 가압법을 사용하여 gutta-percha와 AH26 sealer를 이용하여 근관 충전을 시행하였다. 각 충전된 시편의 치근단 3mm를 절제하였다. 각 시편은 이미로 4군으로 나누었으며 1군에서는 치근단 와동을 초음파 기구로 형성하였고 2군에서는 음파 기구로 형성하였다. 3군은 음성대조군으로 4군은 양성대조군으로 분류하였다. 형성된 치근단 와동은 공기 분사침을 이용하여 건조 후 super EBA 시멘트로 충전하였으며 Anaerobic chamber에서 Fusobacterium nucleatum (VPI 10197)을 사용한 혐기성 세균 미세누출 모델을 이용하여 30일간 미세 누출을 관찰한 결과, 초음파 기구를 사용한 군에서는 80%에서 음파 기구를 사용한 군에서는 75%에서 미세누출이 나타났으나 통계적으로 유의성 있는 차이는 보이지 않았다.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.3
• /
• pp.672-677
• /
• 2008

In order to explore the anti-oxidization effect of oriental medicine and cereal medium(OCM) where Tricholoma matsutake mycelia were cultured, measurement of hot water extract and UMPM(extraction method using ultra sonic waves, micro waves, micro bubble) extract, the total polyphenol content of crude polysaccharide from each extract, SOD-like activity, electron donating ability(EDA), xanthine oxidase inhibitory activity, and tyrosinase inhibitory activity was conducted. The total polyphenol content of each extract was found to be 16.36% for hot water extract(HE) group and 15.73% for UMPM extract(UE) group and the amount of crude polysaccharide precipitated into ethanol of extracts was found to be 8.79% for UMPM ethanol extract(UEE) group and 6.48% for hot water ethanol extract(HEE) group. As a result of measurement of SOD-like activity by concentration of each extract, it was found to be 96.17% for UE group, 91.23% for HE group, 91.33% for UEE group, and 87.11% for HEE group at 20 mg/mL. In the case of EDA, it was found to be 47.55% for UE group, 44.93% for HE group, 25.38% for UEE group, and 18.36% for HEE group. And in the cases of the rates of xanthine oxidase inhibitory activity and tyrosinase inhibitory activity, as the concentration of each extract increased, the inhibition rate increased accordingly. As a result of comparison between hot water extract method and UMPM extract method using extracts obtained from oriental medicine compound medium where Tricholoma matsutake mycelia were cultured, all of the extracts were judged to have a high anti-oxidization effect. In particular, UMPM extracts were found to have higher polyphenol content, SOD-like activity, EDA, xanthine oxidase inhibitory activity and tyrosinase inhibitory activity compared to hot water extract method. In this regard, extracts obtained from OCM where Tricholoma matsutake mycelia were cultured are considered to have high availability as functional material when and if they are prepared using UMPM extract method.

• The Korean Journal of Petroleum Geology
• /
• v.1 no.1 s.1
• /
• pp.29-35
• /
• 1993

Seismic reflection data can be used to extract information about the velocity structure of the earth. This process is called a velocity inversion of the seismic data. However, it is difficult to recover a broad band reflection coefficient series because the frequency band of seismic trace is limited. The linear programming method has been examined to find the simplest velocity model that has frequency components consistent with the usable frequencies of the seismic trace and interval velocity data. The velocity structure of the earth is displayed in pseudovelocity section. After the linear program had been tested with a synthetic seismic trace, it was applied to the seismic reflection data of the Block Ⅱ in the Yellow Sea. By comparing the pseudovelocity section with sonic logs obtained from the well in the same area, it was possible to define the lithostratigraphy and the boundaries of Cretaceous volcanics and Cretaceous metavolcanics.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.385-390
• /
• 2011

The purpose of this research is to determine the dynamic Magnus effect data of a spinning projectile in wind-tunnel testing. In the present work, the high-speed wind-tunnel tests for the Magnus effect measurements were conducted on a 155-mm spin-stabilized projectile model in the Agency for Defense Development's Tri-Sonic Wind Tunnel at spin rates about 12,000 rpm. The test Mach numbers ranged from 0.7 to 2.0, and the angles of attack ranged from -4 to +10 deg. The validity of the wind-tunnel measurement techniques was evaluated by comparing them with the previous test results on the same configuration. The experimental results show that fair to good agreement is obtained with resonable accuracy.

• Journal of Powder Materials
• /
• v.8 no.3
• /
• pp.151-156
• /
• 2001

MgO based nanocomposite powder including ferromagnetic iron particle dispersions, which can be available for the magnetic and catalytic applications, was fabricated by the spray pyrolysis process using ultra-sonic atomizer and reduction processes. Liquid source was prepared from iron (Fe)-nitrate, as a source of Fe nano-dispersion, and magnesium (Mg)-nitrate, as a source of MgO materials, with pure water solvent. After the chamber were heated to given temperatures (500~$^800{\circ}C$), the mist of liquid droplets generated by ultrasonic atomizer carried into the chamber by a carrier gas of air, and the ist was decomposed into Fe-oxide and MgO nano-powder. The obtained powders were reduced by hydrogen atmosphere at 600~$^800{\circ}C$. The reduction behavior was investigated by thermal gravity and hygrometry. After reduction, the aggregated sub-micron Fe/MgO powders were obtained, and each aggregated powder composed of nano-sized Fe/MgO materials. By the difference of the chamber temperature, the particle size of Fe and MgO was changed in a few 10 nm levels. Also, the nano-porous Fe-MgO sub-micron powders were obtained. Through this preparation process and the evaluation of phase and microstructure, it was concluded that the Fe/MgO nanocomposite powders with high surface area and the higher coercive force were successfully fabricated.