• KSBB Journal
• /
• v.23 no.1
• /
• pp.37-43
• /
• 2008

The use of antihemophilic factor IX complex has been associated with a variety of thrombotic complications, the major cause of which was the contamination of thrombogenic proteins such as vitamin K-dependent clotting factors II, VII, and X. In order to produce a commercial factor IX (GreenNine VF) free from thrombogenic potential, industrial-scale production process for high-purity factor IX from human plasma has been developed. The purification process contains cryo-precipitation, DEAE-sephadex A-50 anion-exchange chromatography, DEAE-toyopearl 650M anion-exchange column chromatography, heparin-sepharose 6FF affinity column chromatography, and CM-sepharose FF cation-exchange column chromatography. Also the process includes two viral inactivation and removal procedures, solvent/detergent treatment and nanofiltration using Viresolve NFP filter. The purification yield was 35.4%. The specific activity in the purified concentrate was 190.8 IU/mg which exceeded that in the factor IX complex (FacNine) by a factor of 48. The activities of factor II, VII, and X were not detected in GreenNine VF. SDS-PAGE analysis showed that GreenNine VF had the highest purity in comparison with commercially available high purity factor IX concentrates, Mononine, Octanyne, Berinin HS, and Immunine STIM plus 600. One batch size of the production was 2,400 vials of 250 IU product or 1,200 vials of 500 IU product from 1,600 L cryo-poor plasma.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.775-783
• /
• 2015

This study was carried out to investigate the physicochemical properties and volatile ingredients of Jeju Apple mango subjected to different extraction methods and GC/MS. The crude protein, fat, and ash contents were $0.22{\pm}0.01$, $0.09{\pm}0.00$, and $0.27{\pm}0.02%$, respectively, and contents of free sugar increased in the order of sucrose, fructose, and glucose, whereas maltose, lactose, and galactose were not detected. The numbers of volatile flavor compounds obtained by the SE (solvent extraction), SDE (simultaneous steam distillation extraction), and SPME (solid-phase micro-extraction) methods were 51, 59, and 71, respectively. The percentages of extracted volatile flavor compounds in mango were 11.44, 15.68, and 73.54% by the SE, SDE, and SPME methods, respectively. The most abundant compounds found in Jeju Apple mango were terpenes and their derivatives, which accounted for 44.49~94.57% of total volatiles obtained. SPME method was considered to be the most effective extraction method in terms of the numbers of detected compounds and their amounts. ${\delta}$-3-Carene was identified as the dominant compound in mango, whereas ${\alpha}$-phellandrene, ${\gamma}$-terpinene, trans-${\beta}$-ocimene, ${\alpha}$-terpinolene, limonene, ${\alpha}$-pinene, and furaneol were the next important compounds.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.595-601
• /
• 2014

The microstructures of NATM were examined by SEM, FT-IR spectra, tensile properties, mole % of [NCO/OH], and particle size analyzer. Growing concerns in the environment-friendly industries have led to the development of solvent-free formulations that can be cured. We had synthesized NATM(New Austria Tunnel Method) resin having the ability to protect stainless steel against corrosion. Comparing with general NATM resin and coatings, this resin that synthesized with polyurethane and epoxy was highly stronger in intensity and longer durability. Hybrid resin was composed of polyols, MDI, epoxy, silicone surfactant, catalyst and crosslink agent, and fillers. Moreover, fillers such as fume silica not only accelerated the curing rate but also improved the physical property as thermal barriers. The rigid segments of synthetic resin in mechanical properties were due to fume silica and the increase the mole% of [NCO/OH] for corrosion protection. In conclusion, the hybrid resin microstructure with crosslink agent and fume silica are good material for thermosetting coating of metal substrates such as stainless steel.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.178-187
• /
• 2016

Objectives: Diisocyanates are a potent inducer of diseases of the airways, especially asthma. In this study, toluenediamine(TDA) and methylenedianiline(MDA) in urine were evaluated as biomarkers of exposure to tolunenediisocyanate(TDI) and methylenediphenyl diisocyanate(MDI), respectively. Methods: Workers exposed to TDI and MDI, as well as non-occupationally exposed subjects, were studied and pre- and post-shift urine samples were collected from 8 control subjects and 8 workers from a factory which manufactures polyurethane products for reducing noise and vibration in automobiles. Airborne TDI and MDI(n=8) were sampled on solvent-free glass filters impregnated with n-butylamine and detected by liquid chromatography atmospheric pressure ionization tandem mass spectrometry. Urinary TDA and MDA were detected as pentafluoropropionic acid anhydride(PFPA) derivatives by liquid chromatography electrospray ionization tandem mass spectrometry. Results: The median levels of urinary 2,6-TDA(p<0.001), 2,4-TDA(p=0.001), and MDA(p<0.001) of workers in post-shift samples were significantly higher than those of controls. The median levels of urinary 2,6-0TDA($0.63{\mu}g/g$ creatinine vs $0.34{\mu}g/g$ creatinine, p=0.017) and MDA($4.21{\mu}g/g$ creatinine vs $3.18{\mu}g/g$ creatinine, p=0.017) of workers in post-shift samples were significantly higher than those of the pre-shift samples. There were significant correlations between the urinary 2,6-TDA, 2,4-TDA, and MDA of workers in post-shift samples and the airborne 2,6-TDI(rho=0.952, p<0.001), 2,4-TDI(rho=0.833, p=0.001), and MDI(rho=0.952, p<0.001). Conclusions: These urinary diamines, metabolites of diisocyanates, in post-shift samples were useful biomarkers to assess occupational exposure to diisocyanates.

• Korean Journal of Weed Science
• /
• v.8 no.3
• /
• pp.283-290
• /
• 1988

This study was conducted to clarify the identification of phytotoxic compounds from 5 upland weeds which had been collected at their maturity age in the field of Kyungpook province, Korea. 5 weed species including Stellaria aquatica strongly inhibited the lettuce seed germination. These 5 species were Amaranthus lividus, Stellaria aquatica, Achyranthes japonica, Polygonum perfoliata and Galinsoga ciliata. the degree of inhibitory effects according to various solvent extracts such as ethanol, aceton, chloroform and ether was different as species. In total phenol and diphenol content G. ciliata had largest amount of total phenol with 2.75mg/g, P. perfoliata 1.8mg/g, S. aquatica 1.7mg/g, A. lividus 1.28mg/g, A. japonica 1.27mg/g respectively. A. lividus had much amount of p-cresol, hydroquinone, ferulic, caffeic, p-cl-benzoic and p-coumaric in order. S. aquatica, A. japonica, P. perfoliata and G. ciliata had a large quantity of ferulic, caffeic, 7-OH-coumarin and protocatechuic acids in common. The amount of fatty acids was existed 8.49mg/g in S. aquatica, 7.14mg/g in A. japonica, 7.10mg/g in G. ciliata, 5.49mg/g in P. perfoliata and 4.2mg/g in A. lividus respectively. Most of 4 weeds except G. ciliata had much oxalic acid to the extent of 14-22mg/g. however it appeared that G. ciliata had much quantity of feruic and citric acids.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.390-397
• /
• 2010

Residual solvents in foods are defined as organic volatile chemicals used or produced in manufacturing of extracts or additives, or functional foods. The solvents are not completely eliminated by practical manufacturing techniques and they also may become contaminated by solvents from packing, transportation or storage in warehouses. Because residual solvents have no nutritional value but may be hazardous to human health, there is a need to remove them from the final products or reduce their amounts to below acceptable levels. The purpose of this study was to develop and evaluate an analytical method for the screening of residual solvents in health functional foods. Furthermore, the aim of this study was to constitute a reasonable management system based on the current state of the market and case studies of foreign countries. Eleven volatile solvents such as MeOH, EtOH, trichloroethylene and hexane were separated depending on their column properties, temp. and time using Gas Chromatography (GC). After determining the GC conditions, a sample preparation method using HSS (Head Space Sampling) was developed. From the results, a method for analyzing residual solvents in health functional foods was developed considering matrix effect and interference from the sample obtained from the solution of solvents-free health functional foods spiked with 11 standards solutions. Validation test using the developed GC/HSS/MS (Mass Spectrometry) method was followed by tests for precision, accuracy, recovery, linearity and adequate sensitivity. Finally, examination of 104 samples grouped in suits was performed by the developed HSS/GC/MS for screening the solvents. The 11 solvents were isolated from health functional foods based on vapor pressure difference, and followed by separation within 15 minutes in a single run. The limt of detection (LOD), limit of quantification (LOQ), recovery and coefficient of variation (C.V.) of these compounds determined by the HSS/GC/MS were found to be 0.1 pg/mL, 0.1-125 pg/g, 51.0-104.6%, and less than 15%, respectively. Using the developed HSS/GC/MS method, residual solvent from 16 out of 104 health functional products were detected as a EtOH. This method therefore seems t o be a valuable extension ofanalytical method for the identification of residual solvents in health functional food.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.427-431
• /
• 1999

Copolyester resins for the coil coating process of aluminium and steel strip were synthesized and their thermal properties, molecular weight and solvent solution characteristics were examined. Copolyesters were obtained by two step reactions. The first step was to prepare bishydroxyethyl terephthalate (BHET), bishydroxyneopentyl terephthalate (BHNPT), bishydroxyethyl isophthalate (BHEI), bishydroxyneopentyl sebacate (BHNPS), bishydroxyneopentyl adipicate (BHNPA) and bishydroxyethyl adipicate (BHEA) oligomers by esterification reactions. The second step was the polycondensation reaction utilizing those oligomers to obtain relatively high molecular weight copolyesters (Mw = 30,000~59,000 g/mol) as measured by GPC. These copolyesters were amorphous polymers as shown by DSC without $T_m$ peaks probably due to the kink structure introduced by BHET oligomer and relatively large free volume by bulky BHNPT and BHNPS oligomers. The copolyester samples with half of BHET oligomer substituted by BHNPT while keeping BHEI (0.3 mole) and BHNPS (0.1 mole) ratio constant showed glass transition temperature above $40^{\circ}C$ and good solubility in toluene both at low ($-5^{\circ}C$) temperature and room temperature.

• Journal of fish pathology
• /
• v.22 no.3
• /
• pp.317-326
• /
• 2009

This study has shown the screening of anti-bacterial activity of three Indian medicinal plant choloroform : methanol (50:50) solvent leaf extracts (i.e. Azadirachta indica, Ocimum sanctum, and Curcuma longa) with different concentrations (10, 5, 2.5, 1.25, 0.625, 0.312, and 0.156 mg/ml) under in vitro conditions against fish pathogenic bacteria, Aeromonas hydrophila, Streptococcus iniae, Vibrio harveyi, V. anguillarum, and Edwardsiella tarda isolated from olive flounder farms, Jeju Island, South Korea. The anti-microbial activity of the A. indica and O. sanctum extracts yielded the zones of growth inhibition (ZI) was 3 and 1mm against A. hydrophila at concentration of 0.156 mg/ml when compared to that of tetracycline standard (3 mm). At highest concentration (10 mg/ml) of A. indica, O. sanctum, and C. longa, high inhibition was 9, 7, and 6 mm when compared to that of tetracycline (11 mm) against A. hydrophila. The minimum inhibitory concentration (MIC) of A. indica, O. sanctum, and C. longa at 0.156 mg/ml that yield 9, 10, and 13 CFU/ml for A. hydrophila, 16, 22, and 25 CFU/ml for S. iniae and 18, 22, and 23 CFU/ml for E. tarda compared to the tetracycline. At highest concentration (10 mg/ml) of the three extracts was better inhibiting the growth of A. hydrophila, S. iniae and E. tarda. A. indica, O. sanctum, and C. longa were determined to the potential antioxidant activityon the basis of their scavenging activity of the stable 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical. A. indica extract was 0.625 mg/ml which indicated that the strong anti-oxidant activity. However, O. sanctum and C. longa extracts showed weak anti-oxidant activity at this concentration. Hence, in vitro assay among the pathogens, A. hydropila is better inhibitory activity of the extracts. It is evident that the Indian medicinal plants extracts were subjected to its effectiveness against A. hydrophila, S. iniae, and E.tarda at low concentrations. The obtained results in the present study suggested that the Indian plant extracts is a prevention tools for Korean olive flounder aquaculture pathogens and its need further advance investigation.

• Analytical Science and Technology
• /
• v.25 no.5
• /
• pp.292-299
• /
• 2012

GC/MS has been utilized for many applications due to great resolution and reproducibility, which made it possible to build up the database of mass spectrum, while HS-SPME has the advantage of solventfree extraction of volatile compounds. The combination of these two methods, HS-SPME GC/MS, enabled many scientific applications with various possibilities. In this study, the analysis of trail pheromone excreted from live Camponotus japonicus with the feature of solvent-free extraction was carried out and the optimization for this analysis was performed. The major compounds detected were n-decane, n-undecane, and n-tridecane. Optimization for the best detection of these hydrocarbons was processed in the point of SPME parameter (selection of fiber, extraction temperature, extraction time, etc.). The advantage of the analysis of live sample is to analyze phenomenon right after it is excreted by ants. But the experimental process has restriction of extraction temperature and time because of the analysis of live ants. Establishing the process of HS-SPME GC/MS applied to live samples shown in this study can be a breakthrough for the ecofriendly and ethical research of live things.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1999.04a
• /
• pp.5-5
• /
• 1999

The Principal deficiency of the existing notion about the sintering-mixtures consists in the fact that almost no attention is focused on the Phenomenon of alloy formation during sintering, its connection with dimensional changes of powder bodies, and no correct ideas on the driving force for the sintering process in the stage of establishing chemical equilibrium in a system are available as well. Another disadvantage of the classical sintering theory is an erroneous conception on the dissolution mechanism of solid in liquid. The two-particle model widely used in the literature to describe the sintering phenomenon in solid state disregards the nature of the neighbouring surrounding particles, the presence of pores between them, and the rise of so called arch effect. In this presentation, new basic scientific principles of the driving forces for the sintering process of a two-component powder body, of a diffusion mechanism of the interaction between solid and liquid phases, of stresses and deformation arising in the diffusion zone have been developed. The major driving force for sintering the mixture from components capable of forming solid solutions and intermetallic compounds is attributed to the alloy formation rather than the reduction of the free surface area until the chemical equilibrium is achieved in a system. The lecture considers a multiparticle model of the mixed powder-body and the nature of its volume changes during solid-state and liquid-phase sintering. It explains the discovered S-and V-type concentration dependencies of the change in the compact volume during solid-state sintering. It is supposed in the literature that the dissolution of solid in liquid is realised due to the removal of atoms from the surface of the solid phase into the melt and then their diffusicn transfer from the solid-liquid interface into the bulk of liquid. It has been shown in our experimental studies that the mechanism of the interaction between two components, one of them being liquid, consist in diffusion of the solvent atoms from the liquid into the solid phase until the concentration of solid solutions or an intermetallic compound in the surface layer enables them to pass into the liquid by means of melting. The lecture discusses peculimities of liquid phase formation in systems with intermediate compounds and the role of the liquid phase in bringing about the exothermic effect. At the frist stage of liquid phase sintering the diffusion of atoms from the melt into the solid causes the powder body to grow. At the second stage the diminution of particles in size as a result of their dissolution in the liquid draws their centres closer to each other and makes the compact to shrink Analytical equations were derived to describe quantitatively the porosity and volume changes of compacts as a result of alloy formation during liquid phase sinteIing. Selection criteria for an additive, its concentration and the temperature regime of sintering to control the density the structure of sintered alloys are given.