• Journal of Powder Materials
• /
• v.6 no.2
• /
• pp.132-138
• /
• 1999

A new binder system and debinding process for low carbon residue in the injection molding of Nd(Fe, Co)B powder are investigated. In the injection molding of magnetic materials, it is demanded to reduce carbon residue which deteriorates their magnetic properties. The binder system developed is composed of polyethylene glycols (PEGs) and polypropylene (PP). PEG was selected as a major binder is component to be extracted in a molecular state by solvent extraction in ethanol, which step would leave no residue. PP was selected as a minor binder component to be subsequently removed by thermolysis which step would leave carbon residue. The behaviors of solvent extraction with the variations of PEG molecular weight, temperature, and time were examined. The dependency of residual carbon content on thermolysis atmosphere was also studied. Opened pore channels introduced in a green body by the solvent extraction and microstructures of the sintered magnets were observed using SEM.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.45-50
• /
• 2021

As the difficulty of flip chip products increases, there is a growing interest in the material of flux, which is safe from the solder wetting and reliability. In the case of no clean flux, there is merit in terms of process efficiency because there is no cleaning process. But Cu migration and delamination can be occurred if the residue remains after the reflow process. In this study, major element materials, solvent and activator, are changed and confirmed effect of non-wet and reliability in the package environment. Stability of materials were secured through storage stability evaluation, and we found out non-wet zero materials through the application of two types of solvent and activator with different boiling point and the increase of activator content. After reliability test, no delamination was found in the plane analysis, which secured the final composition of low residue flux.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.68-74
• /
• 1993

In order to maximize the utility of vacuum residue, supercritical solvent extraction technique where n-pentane was used as a supercritical solvent was applied to obtain deasphalted oil from vacuum residue. Oil-extraction yield at various temperatures and pressures and the contents of metal complex and sulfur of extracted oil were investigated. In supercritical state, extraction yield of deasphalted oil was found to be strongly dependent on the n-pentane density, and the metal complex content of extracted oil was effectively lowered when compared with that of vacuum residue. However, the sulfur content of extracted oil showed little difference when compared with that of vacuum residue.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.202-206
• /
• 1988

In order to investigate the oligomerization state of the plasma membrane proteolipid apoprotein purified from the bovine kidney, fluorescence polarization experiment was carried out in the two different solvent systems, i.e., water and organic solvent(chloroform-methanol). The molecular volumes of the proteins estimated from the Perrin equation, were to be 45,258$A^3$ and 17,608$A^3$ in water and organic solvent, respectively. These values indicate that a trimerization is possibly occurring in the aqueous environment. As an auxiliary experiment for the calculation of the molecular volume using Perrin equation, fluorescence quenching constants ($K_q$) with the quencher acrylamide and fluorescence lifetimes (${\tau}_F$) of the intrinsic fluorophore tryptophan residue were estimated in the two different solvent systems. $K_q$ in water was 18.21$M^{-1}$ and it was 46.24$M^{-1}$ in organic solvent. Fluorescence lifetimes of tryptophan residue were calculated to be 2.80 nsec. in water and 3.81 nsec. in organic solvent, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.238-240
• /
• 2005

The enthalpies of transfer, ${\Delta}H_t{\Theta}$, of NaI from water to aqueous methanol, ethanol and isopropanol, iPrOH, systems are reported. These data have been analysed in terms of the new solvation theory. These data are considered in terms of the new developed solvation theory including variable ($\alpha$n + $\beta$N), the net effect of the solute on the solvent-solvent bonding, is positive if there is a net breaking or weakening of solvent-solvent bonds. The solvation parameters recovered from the analyses indicate that the net affect of NaI on solvent structure is a breaking of solvent-solvent bonds and that NaI is preferentially solvated by water in all aqueous alcohol systems considered. ($\alpha$n + $\beta$N) values increase with increasing in the size of the alcohol alkyl residue from methanol to iPrOH.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.53-61
• /
• 2015

PURPOSES : The objective of this study is to evaluate the SDAR (solvent deasphaltene residue), which is obtained from the solvent deasphalting (SDA) process, as a pavement material. METHODS : The physical properties of the SDAR were evaluated based on its chemical composition, and asphalt mixtures with the SDAR were fabricated and used for the evaluation of mechanical properties. Firstly, the chemical composition of SARA (saturate, aromatic, resin and asphaltene) was analyzed using the TLC-FID (thin-layer chromatography-flame ionization detector). Moreover, the basic material properties of the asphalt binder with the SDAR were evaluated by the penetration test, softening point test, ductility test, and PG (performance grade) grade test. The rheological properties of the asphalt binder with the SDAR were evaluated by the dynamic shear modulus ($G^*$) obtained using the time-temperature superposition (TTS) principle. Secondly, the mechanical properties of the asphalt mixtures with the SDAR were evaluated. The compactibility was evaluated using the gyratory compacter. Moreover, the tensile strength ratio (TSR) was used for evaluating the moisture susceptibility of the asphalt mixtures (i.e., susceptibility to pothole damage). The dynamic modulus $E^*$, which is a fundamental property of the asphalt mixture, obtained at different temperatures and loading cycles, was used to evaluate the mechanical properties of the asphalt mixtures. RESULTS AND CONCLUSION : The SDAR shows stiffer and more brittle behavior than the conventional asphalt binder. As the application of the SDAR directly in the field may cause early failures, such as cracks on pavements, it should be applied with modifiers that can favorably modify the brittleness property of the SDAR. Therefore, if appropriate additives are applied on the SDAR, it can be used as a pavement material because of its low cost and strong resistance to rutting.

• Journal of Ginseng Research
• /
• v.20 no.1
• /
• pp.60-64
• /
• 1996

In this study, we investigated the appropriate conditions to extract acidic polysaccharide and to prepare red ginseng extract being rich in acidic polysaccharide from red tail ginseng marc produced after manufacturing alcoholic extract from red tail ginseng. Amount of acidic polysaccharide in red tail ginseng marc was about 11%. The best condition for the extraction of acidic polysaccharide from the marc was using of 3~5 mg of $\alpha$-amylase/g residue/15 ml of distilled water, and the amount of acidic polysaccharide in water extract of the residue treated with $\alpha$-amylase was about 27%. So, it is possible to manufacture red ginseng extract being rich in acidic polysaccharide using water extract of red tail ginseng alcoholic residue as extraction solvent. From the above results, we suggest that red tail ginseng residue produced by manufacturing alcoholic extract of red tail ginseng has high potencies in the utilization of waste material.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.907-912
• /
• 1999

In this study, removal effect of residue pesticides on vegetable and fruit using organic acid salt in alkali solution were investigated by gas chromatography and measurement of detergency. Generally, for the removal methods of residue pesticides and oily pollution were used chemical detergent or organic solvent. Specially, in our experiment, we only used material of food additives and trisodium citrate were superior to other organic acid salt. It was investigated that removal effect of pesticides was superior to chemical detergent.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.66-71
• /
• 2011

Various single solvents were tested to find the effective solvent for the extraction of algae oil from wet-form Chlorella minutissima. In the case of single solvents, their extractabilities for algae oil were increased with their polarity because the water in wet algae cell is to form a solvent shell around the lipids. Based on these results, the wet-form algae samples were treated with a polar alcohol solvent and then a nonpolar solvent was added in algae residue. In the algae oil extraction by ethanol/n-hexane, total lipid contents were 40-50% and composition of triglyceride in extracted oil was 46.50%. Considering solvent toxicity of conventional solvent mixture such as chloroform and methanol for algae oil extraction, the ethanol/n-hexane system was identified as the effective one for the oil extraction from wet-form Chlorella minutissima.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2004

Amount of residual ink solvent on the packaging materials from Korea, Japan and Europe was measured and compared. The amount of packaging materials from Korea was much higher than that of Japan and Europe. To reduce the residual amounts of ink solvent, aging condition of printed packaging materials including aging time and temperature was modified and evaluated. Aging with high temperature and short time ($60^{\circ}C$ and 24 hours) was more effective for reduction of residual amount of ink solvent than that with low temperature and long time. To find out change of reduction pattern of residual amount of solvent according to plastic packaging material, several monolayer and multilayer packaging materials were selected. Among the monolayer packaging materials, the amount of EVOH and PET was lower than that of polyolefin plastic film including PE and PP. PP/EVOH/PET among the selected multilayer film showed the lowest amount of residual ink solvent on food packaging materials. Result of this research revealed that the residual amount of ink solvent can be reduced by proper selection of aging condition with and by appropriate application of mutilayer plastic film.