• Clean Technology
• /
• v.16 no.3
• /
• pp.162-171
• /
• 2010

The objective of this study is to develop cleaning agents for the indoor water supply pipe which is environmentally friendly and suitable for removing scale by using various organic acids, inorganic acids, and some additives. Among various organic acids, oxalic acid, citric acid, and malic acid showed good cleaning efficiency of iron oxides which were main components of the indoor water supply pipe scale. Several cleaning agents were formulated by adding chemical additives into these organic acids and evaluated for removal of iron oxides. In this study, it was found that nonionic surfactants were excellent for the removal of iron oxide scale among various additives. Two types of cleaning agents($F_1$, $F_2$) with comparatively high solvent power for iron oxides were formulated in this study. The cleaning agents $F_1$ made by organic acids and some additives were formulated to be safe and environmentally friendly, but seemed to have disadvantage due to their comparatively low cleaning efficiency of iron oxide than $F_2$. But, the cleaning agents $F_2$ prepared by adding inorganic acid a little to $F_1$ showed comparatively good cleaning efficiency of iron oxide and could be recommended for removing hard scale of iron oxides in the indoor water supply pipe. Thus, it is considered that the formulated cleaning agents should be selected based on the extent of scale in the indoor water supply pipe.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1667-1678
• /
• 1999

Certain parts of 190 kinds of medicinal herbs and 171 kinds of original materials of food were extracted by methanol. The extracts were tested their microbial inhibition activities against several food spoilage microorganisms, Micrococcus luteus, Bacillus subtilis, Bacillus cereus, Listeria monocytogenes, Pseudomonas aeruginosa, Salmonella typhimurium, Escherichia coli, Saccharomyces cerevisiae, Candida albicans, Penicillium citrinum, Aspergillus flavus and Aspergillus niger. The methanol extracts of Cornus officinalis, Evodia officinalis, Glycyrrhiza glabra, Salvia miltiorrhiza. Schizandrae fructus, Coptidis rhizoma, aroma hop and bitter hop were shown inhibitory effect on certain species of gram(+) bacteria. Aroma hop and bitter hop were shown inhibitory effect on certain species of gram(-) bacteria. The methanol extract of Salvia miltiorrhiza exhibited a strong antibacterial activities. It was purified by solvent fractionation, silicagel column chromatography, prep. TLC, prep. HPLC. The purified active substance was identified as cryptotanshinone by EIMS, $1^H-NMR,\;{13}^C-NMR$ and DEPT. Cryptotanshinone showed a strong antibacterial activity against gram positive bacteria $(MIC\;:\;3.91{\sim}62.50\;{\mu}g/mL)$. Especially, this compound was the most strong activity against Bacillus subtilis $(MIC\;:\;3.91\;{\mu}g/mL)$.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.627-631
• /
• 2010

$\alpha$-Alumna particles were prepared by a precipitation method with metal fluoride additive. Aluminum nitrate and ammonia solution were used as starting materials. $AlF_3$, $CaF_2$, and $MnF_2$ were utilized as additives. The effects of precipitation solvent and metal fluoride on the phase transformation temperature, size and morphology of $\alpha$-alumna particles were investigated. The solvent for precipitation did not affect the phase transformation temperature, while it influenced the size of $\alpha$-alumna particles. The phase transformation temperature to $\alpha$-alumna was reduced by addition of metal fluoride and was different with metal cation in metal fluoride ($AlF_3(800^{\circ}C)$ < $MnF_2(900^{\circ}C)$ < $CaF_2(950^{\circ}C)$). The addition of each of three metal fluorides led to the formation of platelike particles and, among the three additives, $MnF_2$ additive resulted in the formation of relatively small particle.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.938-945
• /
• 1996

The present studies are to describe the grafting reaction of styrene in various solvents to polypropylene fabric by the simultaneous method using Co-60. The influence of various factors such as absorbed dose, dose rate, type of solvent, acid and multifunctional monomer were evaluated. At constant absorbed dose, the grafting yield was found to be higher at low dose rate. The initial rate of grafting was found to be proportional to a 0.56 power of dose rate. The inclusion of mineral acid in the grafting solution led to an increase in radiation grafting yield at almost all monomer concentration examined. Multifunctional monomer was also effective to increase grafting yield. The addition of both acid and multifunctional monomer was found to accelerate the grafting yield much more than the separate addition of two additives.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.949-958
• /
• 2000

Antimicrobial effects of 150 kinds of Korean and 82 kinds of Indonesian plants were investigated to develope natural food preservatives. Extracts of the plants with 70% ethanol were tested their antimicrobial effects against several food spoilage microorganisms, Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans and Aspergillus niger. Seventeen kinds of Korean and eighteen kinds of Indonesian plants were found relatively effective, of which Myristica fragrans and Melaleuca leucadendra were the most effective, respectively. The major fractions of the two plant extracts showing antimicrobial activity were further purified by solvent fractionation, silicagel column chromatography and preparative HPLC. The purified substances were identified as limonene and caprylic acid in M. fragrans, and ${\alpha}-terpineol$ in M. leucadendra, respectively.

• Elastomers and Composites
• /
• v.42 no.2
• /
• pp.93-101
• /
• 2007

In this study, for enhancing the durability of permeable pavement material polyurethane(PU) adhesives were developed, and the physical properties upon polymerization and additives were studied. PU polymerization followed the bulk polymerization of free solvent type considering ecological aspect. Additives used in this study were carbon black, calcium carbonate and ultra violet stabilizer. The property changes upon different environment were evaluated with the compressive strength which is the principal measurement of the property of pavement materials. Among polymerized PU, one formulated with esterpolyol and crosslinkable chain extender gave the highest compressive strength of $74.9kgf/cm^2$, better than commercial $60kgf/cm^2$. The strength was the highest when the material specimen contained carbon black and calcium carbonate 20 wt%, respectively. However, UV stabilizer did not show good weathering properties.

• Membrane Journal
• /
• v.17 no.4
• /
• pp.277-286
• /
• 2007

The technology of seawater desalination has been received much attentions to solve the problem of water shortage through all over the world. In this study, it attempts to confirm the use-possibility of cellulose triacetate (CTA) for preparation of reverse osmosis membranes which have been highlighted as high efficiency and low energy consumption process for seawater desalination. The effects of casting dope parameters like an acetyl content, solvent, additives on the membrane performance were investigated. It was possible to produce the membranes which have high water flow rate and salt rejection with the increase of acetyl content and dioxane content among various dioxane/acetone ratios. Acetic acid and maleic acid were preferred for additives to produce high performance membranes. It was verified that $HOLLOSEP^{(R)}$ module which is commercialized CTA membrane by TOYOBO Co. can produce stable water production and high-quality water for long-term operation in the practice plants without any chemical treatments.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.677-683
• /
• 2005

In this work, the effect of additives such as solvent, sodium dodecyl sulfate and NaCl on microemulsion phase behavior and flux removal efficiency in systems containing commercial alkyl ethoxylates nonionic surfactant was investigated. The addition of a n-hydrocarbon as a solvent produced on O/W (Oil/Water) microemulsion phase over a wider range of temperature and cosurfactant to surfactant ratios. Especially, the addition of n-hexadecane to the surfactant system, which was the most hydrophobic solvent among the solvents used in this study, produced a microemulsion phase over a wide range of temperatures and promoted formation of a microemulsion phase at lower temperatures. The candidate for cleaner samples, prepared from phase behavior experiments, showed excellent removal efficiency for abietic acid at $40^{\circ}C$. These data suggested the potential applicability of hydrocarbons to actual cleaner formulations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.948-952
• /
• 2005

The antioxidative and antimicrobial properties of the solvent extracts of 3 parts (leaf, stem, root) of Crotalaria sessiflora L. were investigated, in order to find out new natural food additives. The antioxidative activities of the extracts were determined by peroxide value (POV) and the conjugated diene value (CDV) of corn oil stored for 30 days at $60\pm2^{\circ}C$. Each part of the extracts were added as $0.02,\;0.05\%$ and then compared with BHT. The anti oxidative activities were as follows in decreasing order: BHT > LeafEX > StemEX > RootEX > control. The induction period showed that the part of the Crotalaria sessifloria L. group added with solvent extract showed a longer induction period compared with the control group. The part of Crotalaria sessiflora L. solvent extract were shown to have antimicrobial effects on the microorganism such as Bacillus subtilis, Staphylococcus aureus, Listeria monocytogenes, Salmonella Enteritidis, Pseudomonas flrourescens and Escherichia coli. Especially the effect on the Pseudomonas flrourescens was remarkable.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.49-54
• /
• 2004

Biotransformation process using microorganisms was examined to improve the bioconversion rate for the production of sotolon from the raw material. First, the extraction condition was optimized with regard to solvent type and pretreatment conditions. Dichloromethane was selected as a suitable solvent for the extraction of sotolon and sotolon-related compounds. Second, various microorganisms such as lactic acid-producing bacteria, yeast and fungi were tested for the biotransformation. Among the tested microbes, Agaricus blazei showed the highest conversion rate. Additives including amino acids, salts, and organic acids were investigated to test their effects on bioconversion. When the solution was added by isoleucine, ${\alpha}-ketoglutaric\;acid$, ascorbate, and $FeSO_4$ and later incubated by culture broth containing the mycelium of Agaricus blazei, the sotolon content increased up to about 77 times as compared to that of the raw material.