• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2212-2216
• /
• 2011

An ionic liquid-based ultrasonic-assisted extraction method has been successfully applied to the effective extraction of phenolic compounds from Laminaria japonica Aresch. Three kinds of 1-alkyl-3-methyl-imidazolium with different cations and anions were evaluated for extraction efficiency. The results showed that both the characteristics of anions and cations have remarkable effects on the extraction efficiency. In addition, the ionic liquid-based ultrasonic-assisted extraction procedure was also optimized on some extraction parameters, such as ultrasonic power, extraction time and solid-liquid ratio. Compared with the conventional solvent, the optimum approach gained the highest extraction efficiency within the shortest extraction time. Average recoveries of phenolic compounds were from 75.5% to 88.3% at three concentration levels.

• Journal of the Korean Chemical Society
• /
• v.53 no.4
• /
• pp.427-431
• /
• 2009

The thermodynamical mechanism of the extraction of soybean isoflavones from soybean residuals using organic solvent method has been studied. On the basis of experiments, a simple model for determining the distribution coefficients in organic solvent extraction was employed to calculate the thermodynamical functions between $K,\;{\Delta}H^0,\;{\Delta}S^0\;and\;{\Delta}G^0$ in the soybean isoflavones extraction process. The results show that the soybean isoflavones extraction is an endothermic and an entropy-increasing process: the ${\Delta}G^0$ decreases when the temperature arises.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.91-100
• /
• 2006

The purpose of this study was to validate alternative method by using non-carcinogenic, and less toxic solvents than NIOSH analytical method 5524 for measuring the airborne MWFs in workplaces. In laboratory tests, the ETM solvents(mixture of same volume for ethyl ether, toluene, and ethanol) were selected. The alternative method of analyzing MWFs, referred to as the ETM solvent extraction method, showed 0.04 mg/sample as LOD, and 0.15 mg/sample as LOQ. The analytical precision (pooled CV, coefficient of variation) of the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was 1.5%, 2.0%, 2.6%, 1.6%, respectively, which was similar to the precision (2.6%) of NIOSH analytical method (NIOSH 0500) for total dust. The analytical accuracy by recovery test, spiked mass calculated as extractable mass, was almost 100%. As the result of storage stability test, metalworking fluid samples should be stored in refrigerated condition, and be analyzed in two weeks after sampling. The 95% confidence limit of the estimated total standard error for the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was ${\pm}12.6%$, ${\pm}12.5%$, ${\pm}14.0%$, and ${\pm}13.6%$, respectively, which satisfied the OSHA sampling and analytical criteria.

• Korean Journal of Pharmacognosy
• /
• v.49 no.1
• /
• pp.65-69
• /
• 2018

Torilin is a major sesquiterpene of Torilis japonica (Umbelliferae) fruits and known to be a melanogenesis inhibitor. Extraction conditions are important factor for the efficient preparation to save cost and time in economic aspects. For this reason, this study was conducted to optimize the extraction condition for maximal yield of torilin. For optimization, extraction factors such as extraction solvent, extraction temperature and sample/solvent ratio were tested and optimized for maximum yield of torilin using response surface methodology with Box-Behnken design (BBD). The optimal condition was obtained as a EtOAc concentration in MeOH of 31.8%, an extraction temperature at $30.3^{\circ}C$ and a sample/solvent ratio, 1000 mg/2 ml. The torilin yield under optimal conditions was found to be 9.9 mg/g dried samples, which were well-matched with the predicted value of 10.4 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of torilin as cosmetic therapeutics to reduce skin hyperpigmentation.

• Korean Journal of Metals and Materials
• /
• v.48 no.5
• /
• pp.430-435
• /
• 2010

Solvent extraction experiments of Rh(III) and Ir(IV) were performed on the HCl solution by using Alamine336 and TBP. The extraction percentage of Rh and Ir by Alamine336 was much higher than that by TBP. For the solvent extraction with Alamine336, the extraction percentage of Rh and Ir decreased with a HCl concentration. However, the extraction percentage of both metals by TBP was below 12% in our experimental range and increased with an increasing HCl concentration of up to 8 M. From the mixed solution of Ir with an excess SnCl$_{2}$, most of the tin was extracted by Alamine336 and TBP. However, the extraction percentage of Ir by Alamine336 was reduced and no iridium was extracted by TBP. The extraction behavior of Ir and Sn was investigated by scrubbing experiments on the loaded Ir with a SnCl$_{2}$ solution.

• Journal of Environmental Health Sciences
• /
• v.19 no.2
• /
• pp.40-45
• /
• 1993

A solvent extraction system of copper-thiocyanate complex into various types of alkylamines such as secondary, tertiary and quaternary ammonium salt for the determination of trace copper by atomic absorption spectrometry is presented. The maximum extraction of copper shows at 0.1 M-thiocyanate and single extraction with 10 ml of 1% amine-MIBK from 50 ml of aqueous solution is enough to be quantitative for micro amounts of copper. The effect of amine diluents and of diverse ions are also examined.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.41 no.2
• /
• pp.36-44
• /
• 2020

Mulberry root bark is one of potential plant sources for antioxidant materials which can be used for the relief of oxidative stress. To explore the effects of solvent type and temperature on the structural characteristics and antioxidant activity of the root bark extracts, we prepared various extracts of mulberry root bark (Morus alba L.) using 0 - 100 % ethanol (EtOH) at RT - 100℃. EtOH concentration and temperature critically affected the extraction yields, the content of bioactive components, and antioxidant activity of the extracts. Use of high content of EtOH solvent and low temperature resulted in the low extraction yield. Meanwhile, it was revealed that the extract prepared using absolute EtOH at room temperature contained polyphenols and flavonoids with the highest contents among other extracts. Interestingly, the temperature differently affected the polyphenol and flavonoid contents according to the solvent types. In the case of 30% EtOH solvent, polyphenol and flavonoid contents increased with an increase in temperature, whereas in the case of 70 and 100 % EtOH, these contents decreased. Using the radical scavenging assay, it was confirmed that the 100% EtOH extracts had higher antioxidant activity compared to distilled water (DW) extracts regardless of temperature. Also, heating might extract more antioxidant components from the root bark. Especially, the extract prepared using 30% EtOH solvent at 100℃ showed the highest antioxidant activity. Taken together, these experimental results imply that the extraction parameters should be designed carefully considering the productivity, the extracted bioactive components, and antioxidant activity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.131-137
• /
• 1998

A composite copper coated powder was generated by pressure hydrogen stripping copper from Kelex 100 solvent extractant in the presence of silica powder. Within the limitation of solvent extraction under constant conditions, both loading level and stripping rate were reproducible. The stripping copper kinetics are reduced from a divalent state to a metallic state and then deposited on the surface of the silica powder. Copper nucleates heterogeneously on the seed particles. They are giving an agglomerated and non - uniform powder.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.9-14
• /
• 2005

Competitive solvent extraction of alkaline earth metal cations from water into organic solvent containing the carboxylic acid crown ether and analogous crown ether phosphonic acid monoethyl esters were investigated. sym-(n-Decyldibenzo)-16-crown-5xyacetic acid $\underline{1}$ and monoethyl sym-(n-decyldibenzo)-16-crown-5-oxymethylphosphonic acid $\underline{3}$ are structurally identical except for the ionizable groups. Both of them provide similar extraction behavior in terms of efficiency and selectivity, but monoethyl sym-(n-decyldibenzo)-16-crown-5-oxymethylphosphonic acid $\underline{3}$ showed higher alkaline earth metals loadings at acidic or neutral media. Monoethylsym-(n-octyldibenzo)-16-rown-5-oxymethylphosphonic acid $\underline{2}$ showed better selectivity and alkaline earth metals loading than did the analogous sym-(n-octyldibenzo)-16-crown-5-oxymethyldiphosphonic acid $\underline{6}$.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.99-103
• /
• 2008

Solvent extraction using salphen as a ligand has been investigated for the selective separation and determination of trace Fe(II) and Fe(III). A salphen ligand was synthesized, and solvent extraction variables, such as solution pH, the concentration of salphen, the type of organic solvent, auxiliary agents, oxidants and the effect of interference were optimized. Salphen is stable at pH 3-4, and Fe(III)-salphen complexes can be selectively extracted into an MIBK(4-methyl-2-pentanone) phase from an aqueous solution within this pH range. For the determination of the total amount of iron in 100 mL of aqueous solution, Fe(II) ions were completely oxidized using 0.05 mL of 3.5% H2O2 without side reactions. To evaluate its applicability, the proposed method was applied to determine trace Fe(II) and Fe(III) in several kinds of water samples. Reproducible results were obtained with RSD of less than 3.0%, and the recoveries for this reliability were obtained with 91-112%.