• Title/Summary/Keyword: Solvent Effect

Search Result 1,837, Processing Time 0.026 seconds

The Crystallization of Polycarbonate Film Using Methylene Chloride/1,3-Dioxolane as a Solution Casting Co-Solvent (Methylene Chloride/1,3-Dioxolane 혼합 용매에 의한 용액 가공 폴리카보네이트 필름의 결정화)

  • Kim, Whan-Ki;Kim, Jae-Hyun;Kim, Sung-Do;Han, Joon-Hee;Kang, Ho-Jong
    • Polymer(Korea)
    • /
    • v.32 no.5
    • /
    • pp.483-488
    • /
    • 2008
  • The effect of methylene chloride/1,3-dioxolane co-solvent on the crystallization in the optical polycarbonate film was investigated. Increasing 1,3-dioxolane content in co-solvent resulted in the crystallization due to the lowering of solvent evaporation rate during film drying process. The crystallization in PC film could be minimized by either controlling of solvent composition and increasing solvent drying temperature. It was found that the surface roughness of solution casting PC film was affected by both crystallization and solvent evaporation rate. This morphological effect by alternative solvent is ascribed to a large decrease in light transmissivity on the optical PC film.

Stoichiometric Solvent Effect on SN1 Solvolytic Reactivity Accounting for Phenomenon of Maximum Rates in Methanol-Nitromethane Mixtures

  • Ryu, Zoon-Ha;Choi, Su-Han;Lim, Gui-Taek;Sung, Dea-Dong;Bentley, T. William
    • Bulletin of the Korean Chemical Society
    • /
    • v.25 no.9
    • /
    • pp.1346-1350
    • /
    • 2004
  • Pseudo-first order rate constants $(k_{obs})$ are reported for the following solvolyses in approximately isodielectric mixtures: 3- and 4-methoxybenzyl chloride, bromo- and chlorodiphenylmethane, and 4-chloro-, 4,4'-dichloro and 4-methyl-chlorodiphenylmethane in 0-80% v/v nitromethane-methanol mixtures; and bromo- and chlorodiphenylmethane and 4-methyl-chlorodiphenylmethane in various acetonitrile-methanol mixtures (in the range 0-50% v/v) at$25^{\circ}C.$ These data, and literature data for t-butyl halides (Cl, Br, and I), and for p-methoxybenzoyl chloride, show rate maxima in solvent compositions of ca. 30% aprotic cosolvent, explained by a stoichiometric solvent effect on electrophilic solvation. Linear relationships are observed between $(k_{obs})/[MeOH]^2$ and [AP]/[MeOH], where [AP] refers to the molar concentration of aprotic cosolvent. The results are consistent with competing third order contributions to $k_{obs}$, $k_{MM}[MeOH]^2$ with hydrogen-bonded methanol as electrophile, and $k_{MAP}[MeOH][AP]$ with hydrogen-bonding disrupted by the aprotic solvent.

Solvent Effects on the Solvolysis of 1-(4-Methoxyphenyl)-1-phenyl-2,2,2-trifluoroethyl Choloride. Influence of an Electron-Withdrawing α-Substituent on Carbonium Ion Center

  • 권정민;김성홍;여수동
    • Bulletin of the Korean Chemical Society
    • /
    • v.17 no.11
    • /
    • pp.1056-1061
    • /
    • 1996
  • Solvolysis rates of 1-(4-methoxyphenyl)-l-phenyl-2,2,2-trifiuoroethyl chloride (1) and 1-(4-methoxyphenyl)-1-phenylethyl chloride (2) were measured in a variety of aqueous binary solvents, and the solvent effect was treated with the Grunwald-Winstein equation. The solvent effect on the solvolysis of 1 failed to give a single linear correlations using the ordinary Y or YCl, but exhibited the wide split pattern which could not be related to the solvent nucleophilicity. The improved correlations with YBnCl and extended dual-parameter treatment, log (k/k0)=mYCl+hI (mΔYΔ), were observed for the solvolysis of 1. These results suggest that the incipient cationic charge in the solvolysis of 1 is delocalized strongly into the aryl-rings in the transition state. While the solvent effect on the solvolysis of 2 is better correlated with Y or YCl than YBnCl but the linearity is not satisfactory. The correlation is comparably improved by the use of the extended Grunwald-Winstein equation, log (k/k0)=0.81YCl+0.26NOTs (R=0.994, SD=±0.12), indicating the cationic charge of reaction center of 2 was localized mostly in the transition state.

In Vitro evaluation of lipid accumulation inhibitory effect in 3T3-L1 cell and antioxidant enzyme activity of Codonopsis lanceolata using different solvent fractions

  • Boo, Hee Ock;Park, Jeong Hun;Kim, Hag Hyun;Kwon, Soo Jeong;Lee, Moon Soon
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.292-292
    • /
    • 2017
  • This study was conducted to evaluate the effect of anti-obesity and antioxidant enzyme activities in vitro by different solvent fractions from the roots of Codonopsis lanceolata. The cytotoxicity of different solvent fractions of C. lanceolata on 3T3-L1 preadipocytes were evaluated using the MTT assay, the rate of cell survival progressively decreased in a dose-dependent manner. Butyl alcohol fraction at $200{\mu}g/mL$ exhibited a pronounced cytotoxic effect (75.73%) on 3T3-L1 cell comparable to that of the hexane fraction (79.82%), methylene chloride fraction (84.02%), ethyl acetate fraction (87.62%) and DW fraction (86.30%) at the same concentration. The Oil Red O solution was used to determine whether different solvent fractions of C. lanceolata induce adipocyte differentiation in 3T3-L1 preadipocytes. Confluent 3T3-L1 cells were treated with $50{\mu}g/mL$ concentration of solvent fraction extracts from C. lanceolata. Inhibitory degree of lipid accumulation against solvent fraction extracts showed a significant level compared with the control. Both lipid accumulation and adipocyte differentiation showed relatively high effect on methyl chloride fraction. The root extract of C. lanceolata had the highest SOD enzyme activity of 84.5% in ethyl acetate partition layer and while water partition layer of diploid showed the lowest SOD enzyme activity of 57.9%. The activity of CAT, APX and POD showed a significantly higher activity in ethyl acetate partition layer compared with the other fraction. These results suggested that the roots of C. lanceolata may assist in the potential biological activity on anti-obesity and antioxidant capacity.

  • PDF

Solvent Vapor Annealing Effects in Contact Resistances of Zone-cast Benzothienobenzothiophene (C8-BTBT) Transistors

  • Kim, Chaewon;Jo, Anjae;Kim, Heeju;Kim, Miso;Lee, Jaegab;Lee, Mi Jung
    • Journal of the Korean Ceramic Society
    • /
    • v.53 no.4
    • /
    • pp.411-416
    • /
    • 2016
  • Benzothienobenzothiophene ($C_8-BTBT$) is a soluble organic small molecule material with high crystallinity resulting from its strong self-organizing properties. In addition, the high mobility and easy fabrication of $C_8-BTBT$ make it very attractive in terms of organic thin-film transistors. In this work, we made $C_8-BTBT$ thin films by using the zone-casting method; we also used an organic solvent to treat the devices with solvent vapor annealing to improve the electrical properties. As a result, we confirmed improved mobility, threshold voltage, and subthreshold swing after solvent vapor annealing. To prove the effect of solvent vapor annealing, we used the simultaneous extraction model to extract the contact resistance from the current-voltage curve. We confirmed that the electrical properties improved with decreasing contact resistance.

THE INVESTIGATION FOR THE EFFECT 01 THE SOLUBILITY PARAMETER BETWEEN OIL BINDER AND SOLVENT TO THE PRODUCT QUALITY IN THE WET TYPE BACK INJECTION PRESS PROCESS.

  • Y, Tae-Young;K, Jong-Kuy;L, Joo-Wan
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.24 no.3
    • /
    • pp.105-110
    • /
    • 1998
  • In the make-up product, Eye-shadow products have several purposes of enhancing product quality such as providing the beauty (variation of shape, clean appearance), feeling, continuity and adhesion. In this paper, newly developed wet type back injection press process is introduced so as to increase higher value products which providing various the beauty. The solvent takes an essential role to provide the fluidity of the powder bulk during the pressed-process of wet type pressed product. In this study, the effect of solvent in the oil binder was investigated, And the higher quality condition of the wet type pressed product was built to apply cosmetic preparation. Firstly, the system was designed powder phase as non treated pigment. The oil binder phase is categorized as hydrocarbons(Mineral oil, Squalane), Silicones(Methicone, Dimethicone ), esters (Octyldodecanol, Octyl Dodecyl Myristate). The solvent phase used was C 7-8 isoparaffin and Isopropyl Alcohol. The interaction of oil binder and solvent is investigated by measuring mass of final oil binder and the each solubility parameter. It was found that the higher the solubility the higher the degree of change in the final composition of the oil binder. In order to maintain the quality of the final product, the solvent used in pressed-process should be hydrophobic with oil binder.

  • PDF

Preparation of Freeze-dried Cefazolin Sodium Bulk Powder with Good Flowability (유동성이 우수한 분체특성을 갖는 세파졸린 나트륨 진공동결건조 분말의 제조)

  • Cho, Jeong-Sik;Jeong, Eun-Ju
    • YAKHAK HOEJI
    • /
    • v.42 no.3
    • /
    • pp.284-289
    • /
    • 1998
  • The effect of reaction condition, solvent addition and thermal treatment on the bulk density, crystallinity and chemical properties of the freeze-dried cefazohn sodium was inves tigated to prepare the cefazolin sodium powder for injection with good flowability. Crystalline cefazolin sodium powder with high untapped-bulk density (about 45%) and low compressibility (about 40%) was obtained by solvent addition to the very highly concentrated cefazohn sodium solution followed by subsequent thermal treatment before freeze-drying. The desirable solvent was low substituted alcohol such as isopropyl alcohol and anhydrous ethanol with the final concentration of about 9%. The pH adjustment and nitrogen gas purging during the reaction did not give significant effect on the chemical properties such as content, color, transmittance and pH of the reconstituted cefazolin sodium aqueous solution.

  • PDF

Ionic Liquid as a solvent and Long-Term Separation Performance in Polymer/Silver Salt Complex Membrane

  • Kang, Sang-Wook;Kim, Jong-Hak;Char, Kook-Heon;Kang, Yong-Soo
    • Proceedings of the Polymer Society of Korea Conference
    • /
    • 2006.10a
    • /
    • pp.307-307
    • /
    • 2006
  • The reduction behavior of silver ions to silver nanoparticles is an important research topic in polymer/silver salt complex membranes for facilitated olefin transport, because it has a significant effect on the long-term stability of membrane performance. In this study, the effects of solvent on the formation of silver nanoparticles and long-term membrane performance in polymer/silver salt complex membrane were investigated. This effect was assessed for the complexes of poly(N-vinyl pyrrolidone) $(PVP)/AgBF_{4}$ with the use of ionic liquid (IL), acetonitrile (ACN) and water as a solvent. Membrane performance test shows that long-term stability is strongly dependent on the kind of solvent and arranged: IL > ACN >> water.

  • PDF