• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.1973-1977
• /
• 2009

In the present study, at first, 2,4-Dihydroxy Salophen (2,4-DHS), has been synthesized by combination of 1, 2-diaminobenzene and 2,4-dihydroxybenzaldehyde in a solvent system. This ligand containing meta-quinone functional groups were characterized using UV-Vis and IR spectroscopies. Subsequently, the interaction between native calf thymus deoxyribonucleic acid (ct-DNA) and 2,4-DHS, was investigated in 10 mM Tris/HCl buffer solution, pH 7.2, using UV-visible absorption and fluorescence spectroscopies, thermal denaturation technique and viscosity measurements. From spectrophotometric titration experiments, the binding constant of 2,4-DHS with ct-DNA was found to be (1.1 ${\pm}\;0.2)\;{\times}\;10^4\;M^{-1}.$ The fluorescence study represents the quenching effect of 2,4-DHS on bound ethidium bromide to DNA. The quenching process obeys linear Stern-Volmer equation in extended range of 2,4-DHS concentration. Thermal denaturation experiments represent the increasing of melting temperature of DNA (about 3.5 ${^{\circ}C}$) due to binding of 2,4-DHS. These results are consistent with a binding mode dominated by interactions with the groove of ct-DNA.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.41-46
• /
• 2009

The rheological properties of highly concentrated Ag nano sol depending on particle size were studied. The Ag nano sol was prepared by reducing the Ag ion in aqueous solution. The size of Ag nano particle was controlled by two steps of nucleation and growth, and the thickness of adsorption layer was varied by molecular weight of polyelectrolytes. The polyelectrolytes acted as not only ionic complex agent in ionic state and but also dispersant after formation of Ag nano sol. The effective volume was controlled by combination of varying the molecular weight of polyelectrolytes and the size Ag nano sol. The particle size and the viscosity of nano sol were characterized by particle size analyzer, HR-TEM and cone & plate viscometer. It was found that the 10 nm and 40 nm-sized Ag nano sols were prepared by controlling the nucleation and growth steps, respectively. Finally, we could prepare highly concentrated Ag nano sol over 50 wt%.

• 대한화학회지
• /
• 제44권3호
• /
• pp.237-242
• /
• 2000

새로운 품질의 수용성 윤활유를 얻기 위해 시중에서 쉽게 구입할 수 있는 지방산인 대두유와 고분자 알콜로부터 에스테르 화합물을 합성하고 그 물성을 실험하였다. 아울러 대두유에 의한 에스데르 화합물의 합성과 그 물성을 보다 정량적으로 분석하기 위해 대두유주된 구성 지방산인 올레익산에 대해 동일 실험을 수행하여 그 물성을 비교하였다. 에스테르 합성반응에 사용된 고분자 알콜은 프로필렌 옥사이드와 에틸렌 옥사이드의 공중합 화합물(PE)로서 분자량에 따라 PE-61(평균분자량:2000), PE-62(평균분자량:2500), 그리고 PE-64(평균분자량:3200) 세 가지 화합물을 사용하였다. 합성된 에스테르 화합물의 물성은 물과 혼합한 이후 수용액 상태의 여러 농도에서 pH,비중,표면장력,유동점도를 측정하여 비교하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1552-1557
• /
• 2004

Characteristics diffusion time of viscoelastic fluids are determined experimental results of terminal velocity by using the falling ball viscometer. The characteristics diffusion time of viscoelastic fluids are determined with help of the sphere device which is installed to return the dropped sphere from the bottom of the test cylinder without disturbing the working fluids. Terminal velocity of th sphere the reason why experimental of characteristics diffusion time that it is have an effect on the time interval of the measuring. Viscous of the fluid the temperature changed in order to have an effect on temperature and terminal velocity of the ball it becomes larger the possibility of knowing. A result of visualization for flow phenomena of around the sphere uses the PIV and the density of the polymer solution which it appears 2000wppm is to a case which is the right and left becomes symmetry to be it will be able to confirm and according to the time interval, to observed velocity vector of same at first drop the sphere.

• 한국레이저가공학회지
• /
• 제16권4호
• /
• pp.12-16
• /
• 2013

For mass production of electronic devices, the processing of the printing roll is one of the most important key technologies for printed electronics technology. A roll of printing process, the gravure printing that is used to print the electronic device is most often used. The indirect laser processing has been used in order to produce printing roll for gravure printing. It consists of the following processing that is coating of photo polymer or black lacquer on the surface of printing roll, pattering using a laser beam and etching process. In this study, we have carried out study on the coating and etching for $25{\mu}m$ line width on the printing roll. To do this goals, a $4{\mu}m$ coating thickness and 20% average coating thickness of the coating homogeneity of variance is performed. The factors to determine the thickness and homogeneity are a viscosity of coating solution, the liquid injection, the number of injection, feed rate, rotational speed, and the like. After the laser patterning, a line width of $25{\mu}m$ or less was confirmed to be processed through etching and the chromium plating process.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제30권2호
• /
• pp.81-85
• /
• 2015

Recently, many researchers have studied silk sericin because of its high water retention, good wound healing, good cyto-compatibility, and blood-glucose- and cholesterol-lowering effects. Although sericin film can be used in wound dressing and cosmetic packs, its poor mechanical properties have prevented its use in industrial fields. In the present study, sericin was obtained from different silkworm varieties, and the effect of silkworm variety on the structure and properties of sericin was examined. Except for a small difference in serine content, no significant difference in sericin was noted among the silkworm varieties. In addition, silkworm variety almost had no effect on solution viscosity, implying that it does not influence the molecular weight of sericin. Mechanical properties of sericin film were strongly affected by silkworm variety. Wonwon 126 showed the best mechanical properties, while N74 and Geumgwangju displayed the worst properties.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.107-114
• /
• 2016

Terra Alba Wallpaper was manufactured by coating inorganic terra alba paint on white base paper, and the surface of the coated layers were microscopically observed. Eco Terra Alba used the functional wall paper in this study was prepared by mixing inorganic Terra Alba and calcium carbonate. Terra Alba showed particle shape. The concentration of inorganic components, pH, and the viscosity of the coating solution were 92.0%, 7.82, 1286 cPs, respectively. The bar coater whit No 3 wire resulted in the least thickness of wet coating layer and coating thickness such $22.5{\mu}m$ with covered all the surface. Bar coater with No. 12 wire leaded to $48.4{\mu}m$ thickness. The coating layers above $43{\mu}m$ thickness showed the cracks on the wall paper surface after coating.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.41-46
• /
• 2004

The formation of rust on metallic substrate is known to cause the damages and destructions of raw materials, which is one of the leading reasons of sturctural collapses and many kind of hazards in modern industry. Polymer gels with rust removing effects were compounded in this study by employing various kinds of acids like hydrochloric acid, phosphoric acid, gluconic acid, oxalic acid as the rust removing ingredients. TEA(Triethanolamine) as dispersant and hydrophilic chemical were used for effective gelation of acids. Also corrosion inhibitor was added to enable the coating effect and to improve rust removing effect on metallic surface. In order to investigate the rust properites on metallic substrate, artificial rusts were prepared in salt solution, using iron, copper, aluminium and brass as the base metals. The properties of gel compounds were checked by gelation, pH, viscosity, morphology property and rust removing test. Developed gel compounds in this study have a good rust removing property, showing a strong adhesion on horizontal and vertical metallic surface, and can be easily rinsed off by water.

• 생약학회지
• /
• 제19권2호
• /
• pp.133-140
• /
• 1988

The effect of ethanol extracts of Gilkyung(Platicodi Radix, Platicodongrandiflorum A, DC), Onji(Polygalae Radix, Polygala tennuifolia Willdenow) and Deoduk(Codonopsis lanceolate Radix, Codonopsis lanceolata) on expectorant activity of rat trachea was investigated. Following treatment of 50% ethanol extract of these medicinal plants (25 mg/rat), the content of neurotransmitters such as acetylcholine and histamine in tissue was significantly increased. The secretions of acid glycoproteins and the artificially injected phenol red were also increased. However, there was no significant difference except Onji From the histological study through periodic acid Schiff and alcian blue stain, the thickness of inner membrane of acinar glands and the stained glycoproteins on surface of epithelium and on the glands were observed in all the rats trachea treated with extract of medicinal plants. In vitro, the viscosity of mucin solution was slightly decreased with an addition of the extracts. Onji showed the most effective expectorant activity among them at the identical conditions. The mechanism of expectorant activity of these medicinal plants seems to be due to stimulation of secretion and changes of rheological properties of mucus.

• 한국농공학회지
• /
• 제33권4호
• /
• pp.73-83
• /
• 1991

A numerical simulation of a 2-dimensional tidal flow in a shallow sea was performed using the frequency domain finite element method. In this study, to overcome the inherent problems of a time domain model which requires high eddy viscosity and small time steps to insure numerical stability, the harmonic function incorporated with the linearized function of governing equations was applied. Calculations were carried out using the developed tidal model(TIDE) in a rectangular channel of lOm(depth) X 4km (width) X 25km(length) under the condition of tidal waves entering the channel closed at one end for both with and without bottom friction damping. The predicted velocities and water levels at different points of the channel were in close agreement with less than 1 % error between the numerical and analytical solutions. The results showed that the characteristics of the tidal flow were greatly affected by the magnitude of tidal elevation forcing, and not by on surface friction, wind, or the linear bottom friction when the value was less than 0.01. For the optimum size of grid to obtain a consistent solution, the ratio between the length of the maximum grid and the tidal wave length should be less than 0.0018. It was concluded that the finite element tidal model(TIDE) developed in this study could handle the numerical simulation of tidal flows for more complex geometrical conditions.