• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.475-480
• /
• 1989

The extracellular polysaccharide was isolated from the culture of Ps. delafieldii and its rheological property was evaluated. The aqueous solution was extremely viscous and shows pseudoplastic behaviour. The flow behaviour index and apparent viscosity of 1 ％solution were 0.09 and 1169 mPa·s. The solution was stable over pH change but did not have thermal stability. The activation energy of flow of 1 ％ solution was 4.44 kcal/mole. The concentration dependency could be expressed double logarithmically.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.79-82
• /
• 2001

Analytical solutions have been derived to delineate the capture zone created by pumping wells for the remediation design of contaminated groundwater. These previous analytical solutions are often restricted to pumping wells only, specific well locations, a limited number of wells, and an isotropic aquifer. Analytical solution was developed to deal with arbitrarily located multi injection-pumping wells in an anisotropic homogeneous aquifer. The solution presented in this study provides a simple, easy method for determining tile complex flow field caused by multi injection-pumping wells at different rates, and will consequently be useful in pump-and-treat design.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.487-490
• /
• 2008

A theoretical study is made of the flow in a confined cylindrical container with differential rotating top and bottom disks. Two kinds of theoretical solution for the azimuthal velocity were obtained: one is an exact solution of Bessel function type and the other is an approximate solution of exponential function type which comes from WKB approximation. Both theoretical solutions are shown to be self consistent with each other as well as a good agreement with previous studies. Moreover, in a range of relatively low Reynolds number, the obtained solution of Bessel function type shows better result than previous solutions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.3
• /
• pp.422-430
• /
• 1999

This paper concerns the study of a two-stage absorption heat pump cycle to utilize treated sewage. This two-stage cycle consists of coupling double-effect with parallel or series flow type and single effect cycle so that the first stage absorber and condenser produces hot water to evaporate refrigerant in the evaporator of the second stage. The effects of operating variables such as absorber temperature on the coefficient of performance have been studied for two-stage absorption heat pump cycle. The working fluid is lithium bromide and water solution. The efficiency of the two-stage absorption heat pump cycle has been studied and simulation results show that higher coefficient of performance could be obtained for the first stage with parallel flow type. The optimum ratio of solution distribution can be shown by considering the COP, the crystallization of solution and the generator temperature.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.136-138
• /
• 2003

This paper describes the practical application of Non-Divergent Power Flow (NDPF) solution in power system analysis. NDPF algorithm prevents the power flow solution from diverging due to the arithmetic error in Newton method, and indicates voltage collapse point. In addition to that, NDPF solution provides us with useful information for evaluating voltage profile in such cases.

• IE interfaces
• /
• v.7 no.3
• /
• pp.193-199
• /
• 1994

The purpose of this paper is to develop a method of the sensitivity analysis that can be applicable to a degenerate tree solution of the minimum cost flow problem. First, we introduce two types of sensitivity analysis. A sensitivity analysis of Type 1 is the well known method applicable to a spanning tree solution. However, this method have some difficulties in case of being applied to a degenerate tree solution. So we propose a sensitivity analysis of Type 2 that keeps solutions of upper bounds remaining at upper bounds, those of lower bounds at lower bounds, and those of intermediate values at intermediate values. For the cost coefficient, we present a method that the sensitivity analysis of Type 2 is solved by using the method of a sensitivity analysis of Type 1. Besides we also show that the results of sensitivity analysis of Type 2 are union set of those of Type 1 sensitivity analysis. For the right-hand side constant or the capacity, we present a simple method for the sensitivity analysis of Type 2 which uses arcs with intermediate values.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.162-169
• /
• 2009

In summer electrical energy is consumed in very high rate. It is used to operate conventional air conditioning system. Hot and humid air can germinate mould spores, encourage ill health, and create physiological stress (discomfort). Dehumidifier solar cooling effect is the one alternative solution saving electrical energy. We use surplus heat energy in the summer, to get cooling effect and then to get human reach to comfort condition. These devices have two system, dehumidifier and regeneration system. This paper will be focus in dehumidifier system. Dehumidifier system use for absorbing moisture in the air and decreasing air temperature. When the liquid desiccant as strong solution contact with the vapor air in the packed tower, it works. The heat and mass transfer performances of flow pattern in the packed tower of dehumidifier are analyzed and compared in detail. In this experiment was introduced, the flow patterns are parallel flow and counter flow. The performance of these flow patterns will calculate from air side. Which is the best flow pattern that gave huge mass transfer rate? The proposed dehumidifier flow pattern will be helpful in the design and optimization of the dehumidifier solar cooling system.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.304-310
• /
• 2001

A numerical model which simulates the heat and mass transfer processes within a counter-current plate type generator for ammonia/water absorption refrigerators was developed. Ammonia/water solution flows downward under gravity and ammonia/water vapor generated by flow boiling flows upward. The flow pattern within the generator was assumed to be a bubbly flow, and the liquid and vapor phase were assumed to be saturated. It was shown that the boiling of ammonia occurred mainly in the upper part of the generator. The effects of the generator length, the wall temperature and the mass flow rate of ammonia/water solution into the generator on the generation of ammonia/water vapor were investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.15 no.4
• /
• pp.46-53
• /
• 1991

In the present study, Navier-Stokes equation is numerically solved by use of a Finite analytic method to obtain the 2-dimensional flow field in the square cavity. The basic idea of F.A.M. is the incorporation of local analytic solutions in the numerical solution of linear or non-linear partial differential equations. In the F.A.M., the total problem is subdivided into a number of all elements. The local analytic solution is obtained for the small element in which the governing equation, if non-linear, to be linearized. The local analytic solutions are then expressed in algebraic form and are overlapped to cover the entire region of the problem. The assembly of these local analytic solutions, which still preserve the overall nonlinearity of the governing equations, results in a system of linear algebraic equations. The system of algebraic equations is then solved to provide the numerical solutions of the total problem. The computed flow field shows the same characteristics to physical concept of flow phenomena.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.3
• /
• pp.41-45
• /
• 2000

In solving the unsteady potential flow problem of the ship in waves with the panel method, in general one can consider the basic flow as the free stream or double body solution. For the double body solution, the body boundary condition has the 2nd derivatives of the velocity potential. Low order panel methods are known to suffer from the significant error in the 2nd derivatives computed at the body surface. This paper analyzes the numerical error in the 2nd derivatives for a 2-D cylinder and a 3-D sphere problem, and an extrapolation method to obtain the correct derivatives on the body surface is suggested.