• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.278-282
• /
• 2007

Polyacrylonitrile nanofibers were fabricated by co-electrospinning technique and were characterized using scanning electron microscopy(SEM). We have evaluated systematically the effects of the important processing parameters affected on the morphology of the formed fibers; voltage, solution concentration and tip to collector distance. PAN nanofibers of about 200 nm${\sim}$2500 nm in diameter were well fabricated at the polymer concentration of 7.5 wt%${\sim}$15 wt%. It has been found that the average diameter of PAN nanofibers increased with increasing the concentration of PAN solution due to the reduction of whipping and splitting for the high viscosity solution. we also found an evidence that the applied voltage is strongly correlated with the distribution of nanofibers and the uniformed size of nanofibers were obtained at electrostatic value of 1 kV/cm.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.121-129
• /
• 1999

Double-diffusive convection with verical temperature and concentration gradients in thermally stratified fluids has been investigated experimentally using an electrochemical technique. Cupric sulfuric-sulffuric acid solution confined between two horizontal copper electrodes was used. The change of thermal and solutal buoyance has no influence on the range of voltage for the limiting current. Due to Soret effect, the onset time of natural convection is delayed as the stabilizing thermal buoyancy decreases. Also it is found that the shrinkage of the unstabilizing solutal buoyancy makes the onset of natural convection retard. Multi-layered convective phenomena do not appear because cupric sulfate-sulfuric acid solution is thermally stratified, and heat diffuses faster than cupric sulfate solfate solution.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.98-101
• /
• 2004

Linear Programming(LP) is the term used for defining a wide range of optimization problems in which the objective function to be minimized or maximized is linear in the unknown variables and the constraints are a combination of linear equalities and inequalities. LP problems occur in many real-life economic situations where profits are to be maximized or costs minimized with constraint limits on resources. While the simplex method introduced in a later reference can be used for hand solution of LP problems, computer use becomes necessary even for a small number of variables. Problems involving diet decisions, transportation, production and manufacturing, product mix, engineering limit analysis in design, airline scheduling, and so on are solved using computers. This technique is called Sequential Linear Programming (SLP). This paper describes LP's problems and solves a LP's problems using the neural networks.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.282-290
• /
• 1998

The equivalent lens conversion technique is applied to design achromatic doublet and aplanatic doublet. A thin doublet which has zero axial thicknesses, are corrected for the third order aberrations at first, and the thin doublet is converted into thick lens system by using the equivalent lens conversion. Two types of cemented doublets, the Fraunhofer type and the Steinheil type, are designed by using a crown glass BaK-2 and a flint glass SF-2. In the thin doublet design, there are two achromatic solutions and a aplanatic solution for the both types.

• Journal of the military operations research society of Korea
• /
• v.28 no.2
• /
• pp.34-55
• /
• 2002

This paper deals with the multiple attribute decision making problem when a decision maker incompletely articulates his/her preferences about the attribute weight and alternative value. Furthermore, we consider the attribute tree which is structured hierarchically. Techniques for establishing dominance with linear partial information are proposed in a hierarchically structured attribute tree. The linear additive value function under certainty is used in the model. The incompletely specified information constructs a feasible region of linear constraints and therefore the pairwise dominance relationship between alternatives leads to intractable non-linear programming. Hence, we propose solution techniques to handle this difficulty. Also, to handle the tree structure, we break down the attribute tree into sub-trees. Due to there cursive structure of the solution technique, the optimization results from sub-trees can be utilized in computing the value interval on the topmost attribute. The value intervals computed by the proposed solution techniques can be used to establishing the pairwise dominance relation between alternatives. In this paper, pairwise dominance relation will be represented as strict dominance and weak dominance, which ware already defined in earlier researches.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.163-175
• /
• 2014

This paper will focus on improving the performance of orthogonal frequency division multiplexing (OFDM) in Rayleigh fading environments. The proposed technique will use a previously published method that has been shown to improve OFDM performance in independent fading, based on ordered sub-carrier selection. Then, a simple non-iterative method for finding the optimal bit-loading allocation was proposed. It was also based on ordered sub-carrier selection. We compared both of these algorithms to an optimal bit-loading solution to determine their effectiveness in a correlated fading environment. The correlated fading was simulated using the JTC channel models. Our intent was not to create an optimal solution, but to create a low complexity solution that can be used in a wireless environment in which the channel conditions change rapidly and that require a simple algorithm for fast bit loading.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.431-435
• /
• 1999

An organic precipitate flotation of Cd(Ⅱ) and Pb(Ⅱ) was investigated by the coprecipitation with lanthanum 8-hydroxyquinolinate. Trace amounts of Cd(Ⅱ) and Pb(Ⅱ) with a significantly large amount of La(Ⅲ) were simultaneously precipitated in a 1,000 mL sample solution with the ethanolic 8-hydroxyquinoline solution. The pH was adjusted to 9.0 with 2 M ammonia solution. The precipitates were floated with the aid of tiny nitrogen bubbles and supported by the stable foam layer of sodium lauryl sulfate. The floats were collected on the fritted glass filter by a suction. The material collected was dissolved with 5.0 mL of ethanol and 1.5 mL of concentrated nitric acid, and then diluted to 25.0 mL with a deionized water. The analytes were determined by a flame atomic absorption spectrophotometry. The recoveries of the analytes spiked in the sample were 94.8% for Pb(Ⅱ) and 92.0% for Cd(Ⅱ). This flotation technique is simple and rapid, and also applicable to the determination of trace Cd(Ⅱ) and Pb(Ⅱ) at lew ppb levels.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.293-300
• /
• 2019

In this paper, an Embedded solution for fast navigation and precise positioning of mobile robots by floor features is introduced. Most of navigation systems tend to require high-performance computing unit and high quality sensor data. They can produce high accuracy navigation systems but have limited application due to their high cost. The introduced navigation system is designed to be a low cost solution for a wide range of applications such as toys, mobile service robots and education. The key design idea of the system is a simple localization approach using line features of the floor and delayed localization strategy using topological map. It differs from typical navigation approaches which usually use Simultaneous Localization and Mapping (SLAM) technique with high latency localization. This navigation system is implemented on single board Raspberry Pi B+ computer which has 1.4 GHz processor and Redone mobile robot which has maximum speed of 1.1 m/s.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.4
• /
• pp.25-29
• /
• 2017

In this paper, we have studied the deformation problem of the scaffold caused by the FDM type 3D printer. The Practical TRIZ technique was used to solve the deformation problem of the scaffold generated from the adhesion surface between the scaffold and the bed. The Practical TRIZ methodology was used to derive the solution and the experiment was conducted on the derived solution. As a result of evaluating the experimental results obtained for the solution, it was found that the deformation of the scaffold was much improved to the satisfactory level.

• Structural Engineering and Mechanics
• /
• v.77 no.2
• /
• pp.245-259
• /
• 2021

In this research, the influence of the laminate stacking sequence on thermal stress distribution in symmetric composite plates with a quasi-square cutout subjected to uniform heat flux is examined analytically using the complex variable technique. The analytical solution is obtained based on the thermo-elastic theory and the Lekhnitskii's method. Furthermore, by employing a suitable mapping function, the solution of symmetric laminates containing a circular cutout is extended to the quasi-square cutout. The effect of important parameters including the stacking sequence of laminates, the angular position, the bluntness, the aspect ratio of cutout, the flux angle and the composite material are examined on the thermal stress distribution. It is found out that the circular shape for cutout may not necessarily be the optimum geometry for all stacking sequences. The finite element analysis results are used to validate the analytical solution.