• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.449-457
• /
• 2023

Shielding for reducing exposure dose can make the diagnosis limited. The purpose of this study is to increase the efficiency of radiation protection and minimize the loss of image information by producing the shielding made of the water and the contrast medium which has different proportion and finding out the ideal proportion of them. Each shielding materials were made of water and water-soluble iodine contrast medium with the different proportion. The attenuation rate of absorbed dose was evaluated by the shielding materials in the plastic contents for measuring the efficiency of the radiation protection. As a result, the higher ratio of the contrast medium, the more efficient it is for radiation attenuation. The anatomical structure was observed most properly in case of the solution with 20 ml of the contrast medium and most difficultly in case of more than 60 ml of the contrast medium. In case of the signal intensity between skeleton and gas, the difference of average value had a significant as p < 0.001. Shielding with contrast medium attenuates less than the conventional shielding but in the examination for the sensitive part to radiation, it can be used to minimize the loss of the image information and reduce the exposure dose.

• Journal of Service Research and Studies
• /
• v.11 no.3
• /
• pp.75-97
• /
• 2021

This study was conducted to derive a society and education system model that will improve the happiness and sustainability of human society. An ideological model for making human society a happy society was derived, and a society and education system structure and operation model based on this was presented. A fair society, a justice society, a mutually considerate society, and a society where individuals are happy are the conditions for a sustainable society. After analyzing the current situation of freedom and equality pursued by capitalism and democracy, which are currently adopted by most societies, an improvement model was derived from the perspective of a sustainable society. The cost of freedom and equality were analyzed and a new alternative system was discussed. The social solidarity and class mobility issues were discussed together and servicism was derived as an alternative solution. It is a system in which two opposing opponents of individual freedom and social norms form a symmetrical balance, and material and spiritual values are balanced. Servicism is a dynamic balance model. That is, the dimensions of time and space are involved. It is a model that maintains a thorough balance through a dialectical process as time and space change, and one value can dominate the other at a specific time or space. The service-oriented society and education system is a system that simultaneously pursues the goals of individual happiness and sustainable development of the social community.

• Trans-
• /
• v.14
• /
• pp.35-63
• /
• 2023

Parkinson's disease is a degenerative neurological disease that affects even basic daily life movements due to impairment of body function caused by a lack of dopamine, which is charge of the body movement. Presently, it is hard to cure Parkinson's disease entirely with medical technology, so movement therapy as a solution to delay and prevent disease is getting more attention. Therefore, this study aims at desiging and disseminating a body movement program that concentrates on individual self-care and balacing the state of body and mind by applying the Feldenkrais Method® to patients with Parkinson's disease. The Feldenkrais Method® is a mind-body perceptual learning method using body movements. It is a methodology that re-educates the nervous system by connecting the brain and behavior as a function of neuroplasticity. In this study, the body movement program developed and verified by the researcher was modified and supplemented with a focus on the self-awareness of the Feldenkrais Method®. A 24-session physical exercise program was composed of 5 stages to improve the self-management ability of patients with Parkinson's disease. The stages include self-awareness, self-observation, self-organization, self-control, and self-care. The overall changes recognize one's condition and improve one's ability to detect modifications in the internal sense and external environment. In conclusion, the body movement program improves the body movement program improves mental and physical functions and self-care for Parkinson's disease patients through the Feldenkrais method. The availability of the program's on-site applicability remains a follow-up task. Furthermore, it is necessary to establish a systematic structure to spread it more widely through convergent cooperation with the scientific field applied with metaverse as a reference for the wellness of the elderly.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.279-288
• /
• 2007

We have studied a method for the preparation of $ACF/TiO_2$ composites involving the penetrationof titanium n-butoxide (TNB) solution into activated carbon fiber. It was focused on the characterization of $TiO_2$ formed in prorous carbon was which increased with surface functional groups by hydrochloric acid treatment. The conversion of TNB to $TiO_2$ for the acid treatment effect must be important for the preparationof $ACF/TiO_2$ composites. From the characterization of surface properties, both the BET surface area and the total pore volume decreased as the distribution of $TiO_2$ on the activated carbon fiber surfaces after acid treatments.The changes in XRD pattern showed the typical anatase type on $ACF/TiO_2$ composite for the sample named FT, FT1 and FT2 treated with 0.05, 0.1 and 0.5 M, respectively. However, XRD patern of FT3 treated with 0.5M showed mixed amatase-rutile structure. According to the results of SEM micrographs, the titanium complexe particles were irregularly distributed around carbon. And some large clusters were found when an amount of acid treatment increased. The EDX results of $ACF/TiO_2$ composites showed the presence of C, O and P with strong Ti peaks. Finally, the excellent photocatalytic activity of the $ACF/TiO_2$ composites between relative concentration($c/c_o$) of MB (methylene blue) and UV irradiation time could be attributed to the both effects between photocatalysis of the formation of titania complexes and adsorptivity of the activated carbon fiber.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.127-128
• /
• 2021

This study suggests surface wave communication, which uses a metal surface as a medium, to provide wireless communication in the extreme environment due to surrounding metal materials on vessels. The test was conducted on a G/T 265 tons tug boat, and to confirm the possibility of surface wave communication between a bridge and each designated space in the boat. As a result, the transmission speed was 13Mbps in average. For the test case between the bridge and the engine room, transmission speed was 4.3Mbps while the engine was on, and 1.2Mbps during sailing. It was able to be overcome by partially changing the equipment installation location. Surface wave communication in a bow storage, a fully enclosed space, had 8Mbps better transmission speed than wireless communication; this confirmed the superiority of surface wave communication in confined spaces on a vessel. Additional surface wave generators were designed and applied to resolve the paint issue. It is expected to apply surface wave communication to implement the new wireless solution on vessels.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.576-583
• /
• 2023

This study investigated the possibility of new adsorbent materials made from pig bone-based biomass. To this end, the properties of pig bone-based activated carbon (PAC) prepared from animal biomass were investigated, and its carbon dioxide adsorption performance was examined. KOH was used as the activation agent, and the specific surface area increased with increasing activation temperature, and the adsorption efficiency of carbon dioxide also increased. The sample activated at 800 ℃ exhibited the largest specific surface area of 1208.7 m²/g and the highest CO₂ adsorption efficiency of 3.33 mmol/g at 273 K, 1 bar. However, the specific surface area and the CO₂ adsorption efficiency decreased at activation temperatures above 900 ℃ due to crystallinity changes and overactivation. On the other hand, when the selectivity was calculated using the ideal adsorption solution theory, PAC-900 samples at 273 K and below 0.8 bar showed the best selectivity. These results suggest that the high selectivity of carbon dioxide/nitrogen adsorption at 273 K is due to the carbon dioxide adsorption capacity of hydroxyapatite formed by the decomposition of carbonate when pig bone is activated at 900 ℃ and its crystallinity.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.3
• /
• pp.221-233
• /
• 2024

Lignin, a prominent constituent of woody biomass, is abundant in nature, cost-effective, and contains various functional groups, including hydroxyl groups. Owing to these characteristics, they have the potential to replace petroleum-based polyols in the polyurethane industry, offering a solution to environmental problems linked to resource depletion and CO₂ emissions. However, the structural complexity and low reactivity of lignin present challenges for its direct application in polyurethane materials. In this study, Kraft lignin (KL), a representative technical lignin, was fractionated with ethanol, an eco-friendly solvent, and mixed with conventional polyols in varying proportions to produce polyurethane films. The results of ethanol fractionation showed that the polydispersity of ethanol-soluble lignin (ESL) decreased from 3.71 to 2.72 and the hydroxyl content of ESL increased from 4.20 mmol/g to 5.49 mmol/g. Consequently, the polyurethane prepared by adding ESL was superior to the KL-based film, exhibiting improved miscibility with petrochemical-based polyols and reactivity with isocyanate groups. Consequently, the films using ESL as the polyol exhibited reduced shrinkage and a more uniform structure. Optical microscope and scanning electron microscope observations confirmed that lignin aggregation was lower in polyurethane with ESL than in that with KL. When the hydrophobicity of the samples was measured using the water contact angle, the addition of ESL resulted in higher hydrophobicity. In addition, as the amount of ESL added increased, an increase of 7.4% in the residual char was observed, and a 4.04% increase in Tmax the thermal stability of the produced polyurethane was effectively improved.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.97-103
• /
• 2024

Some drugs can offer far better medical effectiveness as it is injected through the intradermal layer of the skin, known as a needle-free injection. However, conventional needle-free devices might deliver a relatively large amount of drug in a just single spot of skin, splitting open the tissue layer structure, which might cause bruising and bleeding. By injecting the small volume with a fast repetition rate in a large surface area of skin, the patient may get much fewer injuries and pain. To achieve that specification, the driving force must be instantaneous and short-pulsed. Such a form of an injection device has been developed but the efficacy of those devices has been rarely examined. Therefore, this study developed the laser-induced microjet device that ejects microjet whose speed is ~310 m/s, during the 400~800 ㎲ of pulse time. The device can eject ~1 µL of the drug at the rate at which each shot repeated 10 shots per second. Using this specification, we evaluated the efficacy of drug injection onto mouse models. After injecting the insulin solution into the mouse model, the blood insulin level is detected, resulting in 20 % of blood insulin level with the ordinary needle syringe injection method.

• Journal of Korea Water Resources Association
• /
• v.57 no.2
• /
• pp.73-85
• /
• 2024

Predicting water quality of rivers and reservoirs is necessary for the management of water resources. Artificial Neural Networks (ANNs) have been used in many studies to predict water quality with high accuracy. Previous studies have used Gradient Descent (GD)-based optimizers as an optimizer, an operator of ANN that searches parameters. However, GD-based optimizers have the disadvantages of the possibility of local optimal convergence and absence of a solution storage and comparison structure. This study developed improved optimizers to overcome the disadvantages of GD-based optimizers. Proposed optimizers are optimizers that combine adaptive moments (Adam) and Nesterov-accelerated adaptive moments (Nadam), which have low learning errors among GD-based optimizers, with Harmony Search (HS) or Novel Self-adaptive Harmony Search (NSHS). To evaluate the performance of Long Short-Term Memory (LSTM) using improved optimizers, the water quality data from the Dasan water quality monitoring station were used for training and prediction. Comparing the learning results, Mean Squared Error (MSE) of LSTM using Nadam combined with NSHS (NadamNSHS) was the lowest at 0.002921. In addition, the prediction rankings according to MSE and R² for the four water quality indices for each optimizer were compared. Comparing the average of ranking for each optimizer, it was confirmed that LSTM using NadamNSHS was the highest at 2.25.

• International Journal of Computer Science & Network Security
• /
• v.24 no.7
• /
• pp.157-169
• /
• 2024

The article presents an analysis of innovative teaching technologies as a way to increase students' competitiveness. The author found that innovative technologies in education are information and communication technologies relying on computer-based learning. The structure, content of educational software, organization of Web-space are important when using innovative teaching technologies in English classes. We conducted the study in several stages: comparative analysis, synthesis, classification and systematization of the results of psychological and pedagogical, educational and methodological research; study of legislative acts, periodicals in order to identify the state of the research issue, and determining the directions of its solution, as well as subject, goal and objectives of the study. We used modelling to create situations of foreign language professional communication of future IT specialists. Empirical methods involved questionnaires used for identifying the motives of professional development and determining the features of the educational activities of future IT specialists in the process of training. The methods of mathematical statistics allowed to scientifically describe and systematize the obtained data, to identify the quantitative relationship between the studied phenomena, to analyse and summarize the results. We conducted a socio-psychological study during 2016 - 2019. It involved 255 first- and fourth-year students of National Technical University of Ukraine "Igor Sikorsky Kyiv Poly-technic Institute." Innovative information and communication technologies that improve the educational and cognitive activity of students, as well as increase the level of their knowledge have become important in teaching a foreign language in higher educational institutions. These technologies include MOODLE - Modular Object-Oriented Dynamic Learning Environment, business game, integrated pedagogical technology, case study technology. Thus, the information-rich learning process in combination with the use of innovative technologies, well-organized e-learning, interactive training courses, multimedia tools improves the program of teaching and learning foreign languages in general, and English in particular, improves the level of knowledge of future IT specialists and motivation to study and learn foreign languages, allows students to use a variety of authentic materials. We state that all these factors influence the process of individualization of learning and contribute to the successful mastery of a foreign language.