• 보존과학회지
• /
• 제28권4호
• /
• pp.297-303
• /
• 2012

안동 봉황사의 삼세불(三世佛)은 대웅전 후불탱화로 경상북도 유형문화재 406호로 지정되어 있다. 이들 탱화들은 조선시대 삼세불화 연구의 기준이 되는 작품으로 귀중한 의미를 지닌다. 본 연구에서는 이들 탱화가 그려진 바탕직물의 섬유에 대해 현미경 관찰 및 용해법과 감쇠 전반사이용 적외분광분석법, 주사전자현미경 등을 이용하여 섬유의 재질을 동정하였다. 실험을 위해 보존처리과정 중 수거된 약사불 시료 2점(A, B), 석가불 시료 1점(C), 아미타불 시료 1점(D)을 채취하여 사용하였다. 본 시료들에 대해 기존의 문화재 명칭에는 삼베로 기록되어 있었다. 열화가 심하고 두꺼운 먼지층을 형성하고 있어 육안으로는 감별이 어려웠으나 본 실험을 통하여 약사불 시료1점(A)을 제외하고는 모두 견직물임을 알 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제18권3호
• /
• pp.542-549
• /
• 2018

본 연구는 불소 미방출 치면열구전색제 $Concise^{TM}$에 제조한 생체활성 유리 나노입자(bioactive glass nano particles: BGn)를 0.5, 1.0, 2.0 wt%를 첨가하여 새로운 치면열구전색제를 조성하고 세균부착실험을 통한 세균부착 억제 효과와 물성을 평가 하였다. 물흡수도와 용해도는 ISO 4049(2009) 규격에 맞추어 직경 10 mm, 두께 2 mm 시편을 제작하여 무게를 측정하여 산출하였으며 세균부착효과는 S. mutans, S. aureus, E. coli 3개의 균주를 이용하여 평가하였다. 실험 결과 물흡수도는 BGn 첨가가 증가할수록 높은 값을 보였으며 용해도는 첨가될수록 낮은 용해도를 보였다(p<0.05). 세균부착실험 결과 대조군 $Concise^{TM}$과 비교하여 BGn을 첨가한 S. mutans 실험군에서 다소 낮은 부착 양상을 보였으나 통계적 유의한 차이는 나타나지 않았으나, S. aureus 실험군과 E.coli 실험군에서는 통계적 유의한 차이를 보였다(p<0.05). 이는 BGn의 세균부착 억제 효과가 있음을 입증한 것이라 사료된다. 향후 BGn 첨가양에 따른 효율성과 폭 넓은 물성 연구가 필요할 것으로 사료된다.

• Archives of Pharmacal Research
• /
• 제24권3호
• /
• pp.224-228
• /
• 2001

DA-5018, a recently synthesized capsaicin analog, appears to possess potent analgesic activity when administered topically. The objective of this study is to test the feasibility of the topical administration of this compound. Specifically, our goal was to identify vehicle system that permit a reasonable transdermal permeation of the compound in mice. Among the vehicles examined, isopropyl myristate (IPM) showed the largest in vitro permeability across the intact skin (83.6 ${\pm}$ 5.42${\mu}$l/$\textrm{cm}^2$/h ). However, due to the limited solubility of DA-5018 in IPM (0.53 mg/ml), the maximal flux from the IPM medium remained at only 44.3 ${\pm}2.87{\mu}$g/$\textrm{cm}^2$/hr. In order to increase the flux, addition of better solvents for DA-5018 was attempted, under the assumption that flux is the result of both solubility and permeability. Ethoxydiglycol (EG) and oleic acid (OA) were selected as examples of food solvents. The addition of IC or OA to IPM at a 1:1 volume ratio resulted in a comparable increase in the solubility of the compound (i.e., to 61.1 and 50.2 mg/ml for EG and OA, respectively). However, the addition of EG at a 1:1 volume ratio, for example, increased the flux 6.3 fold (i.e., $279{\mu}$g/$\textrm{cm}^2$/hr), while OA, at a 1:1 volume ratio, decreased the flux 5 fold (i.e., $9.26{\mu}$g/$\textrm{cm}^2$//hr). The mechanism of this discrepancy between EG and OA was investigated by measuring the permeabilty of DA-5018 across the stratum corneum-removed skin of the mouse, under the hypothesis that the viable skin layer may serve as a barrier for the permeation of lipophilic substances such as DA 5018. The permeability of DA-5018, from the medium of EG or OA, across the viable skin differed greatly for EG ($0.41{\mu}$l/$\textrm{cm}^2$/hr) and OA ($0.086{\mu}$l/$\textrm{cm}^2$/hr), suggesting that a higher permeability across the viable skin layer is needed for the second solvents. The maximum flux across the intact skin was achieved for DA-5018 when EG was added to IPM at a 1:1 volume ratio. Thus, the use of a binary system appears to be the best approach for realizing the transdermal delivery of DA-5018 at a reasonable rate.

• 대한소아치과학회지
• /
• 제51권2호
• /
• pp.149-164
• /
• 2024

This study compared the solubility, water absorption, dimensional stability, release of various ions (hydroxyl, calcium, sulfur, strontium, and silicon), and cytotoxicity of light-cured resin-modified pulp-capping materials. Resin-modified calcium hydroxide (Ultra-blend^TM plus, UBP), light-cured resin-modified calcium silicate (TheraCal LC^TM, TLC), and dual-cure resin-modified calcium silicate (TheraCal PT^TM, TPT) were used. Each material was polymerized; solubility, 24-hour water absorption, and 30- day dimensional stability experiments were conducted to test its physical properties. Solubility was assessed according to the ISO 6876 standard, and 24 hours of water absorption, 30 days of dimensional stability were assessed by referring to the previous protocol respectively. Eluates at 3 and 24 hours and on 7, 14, and 28 days were analyzed according to the ISO 10993-12 standard. And the pH, Ion-releasing ability, cell proliferation rate, and cell viability were assessed using the eluates to evaluate biochemical characteristics. pH was measured with a pH meter and Ion-releasing ability was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES). Cell proliferation rate and cell viability were assessed using human dental pulp cells (hDPCs). The former was assessed by an absorbance assay using the CCK-8 solution, and the latter was assessed by Live and Dead staining. TPT exhibited lower solubility and water absorption than TLC. UBP and TPT demonstrated higher stability than TLC. The release of sulfur, strontium, calcium, and hydroxyl ions was higher for TLC and TPT than for UBP. The 28-day release of hydroxyl and silicon ions was similar for TLC and TPT. TLC alone exhibited a lower cell proliferation rate compared to the control group at a dilution ratio of 1 : 2 in cell proliferation and dead cells from Live and Dead assay evaluation. Thus, when using light-cure resin-modified pulp-capping materials, calcium silicate-based materials can be considered alternatives to calcium hydroxide-based materials. Moreover, when comparing physical and biochemical properties, TPT could be prioritized over TLC as the first choice.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1208-1218
• /
• 2019

이 연구는 유기농 식물성 계면활성제의 화장품 가용화력에 관한 연구이다. 유기농으로 인증된 원료를 사용하여 고순도의 폴리글리세릴-10올리에이트와 폴리글리세릴-10스테아레이트를 합성하여 우수한 가용화력을 가진 계면활성제를 개발하였다. 이 혼합원료의 이름을 Solubil ORG-1300으로 칭하였다. 이 원료의 외관은 엷은 노란색의 페이스트이었고, 특이한 고유의 냄새를 가지고 있었다. 비중은 1.15, 산가는 0.072±0.1로 순도가 높았다. 이 계면활성제의 HLB값은 평균값=15.1로 Griffin식을 사용하여 계산하였다. 유기농 가용화제가 향과 오일을 어떻게 가용화되는가를 메커니즘적으로 해석하였다. 가용화 실험은 두 가지 오일에 대하여 성능실험을 통하여 육안으로 판별하고 UV분광광도계로 890nm에서 투과도를 측정하여 투명도를 평가하였다. 이 결과 베르가못오일을 가용화하는데 필요한 계면활성제의 농도는 약 2배정도가 필요한 것으로 나타났다. 또한 토코페릴아세테이트를 가용화하는데 필요한 계면활성제의 농도는 약 8배정도가 필요한 것으로 나타났다. pH변화에 따른 가용화력을 실험한 결과 pH=3.5의 산성영역, pH=7.2의 중성영역, pH=11.5의 알칼리성영역에서도 안정화된 가용화력을 보였다. 화장품의 응용분야로써 보습스킨토너 처방을 성공적으로 개발하였다. 이러한 결과를 바탕으로 스킨케어, 베이비 로션, 민감성 혹은 아토피 피부용 화장품에 폭넓게 응용이 가능할 것으로 기대한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.269-272
• /
• 2000

The flow accelerated galvanic corrosion characteristics of a carbon steel coupled to stainless steel were investigated in deaerated alkaline-chloride solutions as a function of flow velocities(0, 0.2, 0.4 and 0.6 m/s), pH(8, 9, and 10) and temperature(25, 50 and $75^{\circ}C$). The electrochemical properties of specimens were investigated by potentiodynamic test and galvanic corrosion test using RCE(Rotating Cylinder Electrode). Carbon steel did not show passive behavior in the alkaline-chloride solution. The galvanic current density increases with increasing flow velocity and temperature, but decreased with increasing pH. Flow velocity had a small effect on the galvanic current density at $25^{\circ}C$, whereas the flow velocity increased galvanic current density significantly at $50^{\circ}C$ and $75^{\circ}C$. This might be due to the increased solubility of magnetite at the higher temperature.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.302-305
• /
• 2003

The purpose of this study was to assess the effect of surfactant on the rate of NAPLs(non-aqueous phase liquids) solubilization. The experimental variables were surfactant type, NAPLs type and water type. The main experimental designs were consists of two phases. The solubilization rate is sensitive to surfactant type based on this test. Used aqueous surfactants were solubilized and removed 72.77 to 89.90% of toluene, PCE(tetrachloroethylene) from the contaminated water during the test, respectively. T60 has higher and stable recovery ratio than SDS in surfactant type but, the micelle of the T60 is more weaker than that of SDS based on this study's results. And the solubilization rate in used water type was almost same.(deionized water, surface water).

• 대한화장품학회지
• /
• 제22권2호
• /
• pp.89-98
• /
• 1996

A novel polymeric sunscreen agent was developed. It was prepared by the coupling reaction of 2-ethylhexyl 4-hydroxycinnamate with poly vinylbenzyl chloride(PVBC, average MW 6,500). In this reaction the reactivity was mostly affected by catalyst. In the absence of catalyst the yield was approximately 55% and in the presence of tetrabutylammonium bromide the yield was about 65%, but in the presence of tetrabutylammonium iodide the yield was 100% to give a average molecular weight 20,000 polymeric sunscreen agent. There were no side reactions, and its structure and purity were confirmed by various analytical methods, such as NMR, IR, and so on. UV radiation absorption efficiency is more than 70% compared with that of octyl methoxycinnamate. The solubility in polar oil, for example C12-15 alkylbenzoate and caprylic/capric triglyceride, is more than 50%. It showed high stability in the time course of test including acceleration test. This polymer is safe to skin because of poor permeability to skin, no side products in the process of preparing, and easy elimination of excess starting materials.

• 농약과학회지
• /
• 제14권1호
• /
• pp.10-15
• /
• 2010

국내서식 물벼룩종을 이용한 표준생태독성시험법 개발을 위한 기초연구로서 4종의 한국산 물벼룩 Daphnia sp., Daphnia obtusa, Moina macrocopa, Simocephalus vetulus과 국제표준종 Daphnia magna대한 10종 유기용매에 대한 급성독성을 조사하여 독성이 낮으면서도 농약의 용해도가 좋은 유기용매를 시험에 사용하도록 제안하고자 하였다. 한국산 물벼룩에 대해 급성독성이 가장 강한 유기용매는 ethyl acetate로 조사되었으며 DMF, dioxane, isopropanol 3종은 무영향 농도가 EPA에서 급성독성시험에 추천하는 최고 사용농도인 0.5 ml/L 이하로 조사되어 다른 유기용매에 비해 독성이 강하였다. 따라서 독성이 낮으면서 수용해도가 높고 농약원제의 용해성이 좋은 acetone, methanol, ethanol, acetonitrile을 권장 시험용매로 제안한다.

• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.257-262
• /
• 2012

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. Rotating cylinder FAC test facility was designed and fabricated and then performance of the facility was evaluated. The facility is very simple in design and economic in fabrication and can be used in material and chemistry screening test. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO), and temperature. Fluid velocity is controlled with rotating speed of the cylinder with a test specimen. FAC test of SA106 Gr. B carbon steel under 4 m/s flow velocity was performed with the rotating cylinder at DO concentration of less than 1 ppb and of 1.3 ppm. Also a corrosion test of the carbon steel at static condition, that is at zero fluid velocity, of test specimen and solution was performed at pH from 8 to 10 for comparison with the FAC data. For corrosion test in static condition, the amount of non adherent corrosion product was almost constant at pH ranging from 8 to 10. But adherent corrosion product decreased with increasing pH. This trend is consistent with decrease of Fe solubility with an increase in pH. For FAC test with rotating cylinder FAC test facility, the amount of non adherent corrosion product was also almost same for both DO concentrations. The rotating cylinder FAC test facility will be further improved by redesigning rotating cylinder and FAC specimen geometry for future work.